Brand: Irritec

Irritec P1 Drip Tape - 5/8"

Irritec P1 drip tape applies innovative technology to create a drip system that is highly resistant to root intrusion and soil ingestion. Each emitter releases water through a flap that opens under pressure and closes after shut-off. Irritec P1 drip tape can be used for above and below ground applications.

Irritec P1 drip tape is constructed of the highest quality engineering-grade PE for high strength and abrasion resistance. Injection-molded drippers are welded to the inner walls of the seamless tape to minimize friction loss from turbulence. A CV of less than 2.5% delivers uniform water distribution over long runs. With integrated inlet filters and additional protection against clogging, P1 emitters have a high degree of plug resistance even at low pressures.

Features:

• Seamless construction
• High degree of plugging resistance
• Uniform water distribution over long runs
• Above ground and subsurface applications
• Low turbulence design keeps friction loss to a minimum
• Each emitter uses an integrated inlet filter to prevent clogging
• High grade materials are resistant to UV rays, common fertilizers, and mechanical stress

Recommended Filtration:
150 Mesh for 0.13 GPH and 0.17 GPH
120 Mesh for 0.25 GPH , 0.33 GPH , and 0.46 GPH

Flow Rates:
Nominal flow rates are at 10 PSI . Refer to the specifications document above for flow rates corresponding to various pressures and emitter spacing.