Growlink - Batch TankLINK Temp Sensor

Brand: Growlink

Growlink - Batch TankLINK Temp Sensor

Replacement temperature probe for batch tankLINK. Required during pH and EC calibration.

The Batch TankLINK Temperature Sensor reports solution temperature to the Growlink batch tankLINK. Beyond monitoring, it is functionally required equipment: Growlink specifies that this probe must sit in the calibration solution alongside whichever probe is being calibrated, for both the pH and the EC routines. A site without a working temperature probe cannot properly calibrate the other two.

The temperature sensor lands on a removable screw terminal block, same as the EC probe. Growlink notes that temperature sensors with a green wire connect to the CLR terminal. Mounting is by tank pontoon or 1 in. inline manifold. Calibration is a single offset adjustment through the wizard on the controller LCD.

Key Features

• Range 50 to 122 F (10 to 50 C)
• Accuracy plus or minus 2 C with 0.1 degree resolution
• Removable screw terminal block connection for service
• Green wire connects to the CLR terminal
• Supported to 1,000 ft of cable distance from the controller
• Offset calibration through the controller LCD wizard
• Required in solution during both pH and EC calibration procedures
• Mounts by tank pontoon or 1 in. inline sensor manifold, both sold separately

Ideal Applications

• Solution temperature monitoring in nutrient tanks
• Temperature compensation for pH and EC readings
• Required companion for on-site probe calibration
• Supply temperature tracking in greenhouse fertigation