Dab Pumps - Main Assembly for EsyBox Mini 3 - SP00007474

Brand: Dab Pumps

Main Ass.y DAB - EsyBox Mini 3 - SP00007474

DAB lists this part as MAIN ASS.Y DAB. On the electronics the DAB instruction manual states that the electronic control integrated in the system is of the inverter type and makes use of flow, pressure and temperature sensors also integrated in the system, that by means of these sensors the system switches on and off automatically according to demand and is able to detect, prevent and indicate conditions of malfunction, and that the inverter keeps the pressure of the hydraulic circuit constant by varying the rotation speed of the electropump.

On DAB published EsyBox Mini 3 spare parts lists the main board assembly sits at position 12, drawn as a boxed board pack behind the back shell at position 4 and the rear cover at position 5. Item number SP00007474, however, does not appear at position 12, or anywhere else, on any of the four EsyBox Mini 3 spare parts lists published in this document series.

Fits

• Read this before you order. We could not match SP00007474 to any of the four published EsyBox Mini 3 spare parts lists. At position 12 DAB lists SP00002979 on revision N.1 (product code 60179457), SP00007061 on revision N.4 (60183501), and SP00007472 on revisions N.5 and N.6 (60183501 and 60212598). We are not going to claim a revision match this part does not have on paper.
• DAB changed the main board item number twice across those four revisions, so a board is not interchangeable between them on DAB own numbering. Check the number on your pump, or send us a photograph of the technical data plate, before ordering.
• DAB also changed the HMI at position 8 across the same revisions, from SP00002977 on N.1 to SP00007060 on N.4 and N.5 and SP00007857 on N.6. If you are replacing both, give us both numbers from your pump.
• The four DAB lists behind this listing are a Schuko build, product code 60179457, and Australian builds, product codes 60183501 and 60212598. DAB publishes no US list in this document series, so US buyers should check the item number against the technical data plate on their own pump before ordering.

Before You Order

• DAB prints this caution at the head of every EsyBox Mini 3 spare parts list: "Attention: check the correspondence with the revision of your product."
• This is the one part on this pump where the revision question is unavoidable. Confirm SP00007474 against your own pump, or against DAB or your supplier, before ordering.
• How to check your own pump. DAB keeps the technical data plate inside the technical compartment. Open the door on Face A, which is the top face of the pump in the vertical installation, and read the plate: DAB shows it as item 2 in Figure 3 of the EsyBox Mini 3 instruction manual, alongside the quick guide, the filling cap, the accessory tool, the motor shaft and the QR code. If you cannot make out a revision, photograph the whole plate and send it with your order.
• DAB instruction manual, maintenance section: disconnect the power supply before starting any work on the system.