Dab Pumps - HMI Assembly 60/120 M CSA for EsyBox Max - SP00007138

Brand: Dab Pumps

HMI Assembly 60/120 M CSA - EsyBox Max - SP00007138

The HMI assembly is the EsyBox Max user interface module. DAB's manual, section 7, states that the user interface is composed of a keypad with display and with POWER, COMM and ALARM warning LEDs, and that the display shows the values and statuses of the device with indications on the functionality of the various parameters. It is the module that carries the MODE and SET keys used to move through and leave the menus, and it is where DAB's blockage codes appear, including BL, BP1, OC and PB in the troubleshooting table.

DAB's catalogue description for this item is (SP) ESYBOXMAX - HMI ASS.Y 60/120 M CSA. The CSA suffix marks it as the North American certified variant. On the exploded drawing of the AU build, the HMI module is the front assembly that carries the display window and mounts to the front of the machine, with the main board assembly behind it. No position number is claimed for this item here, because it does not appear on the spare parts sheet used for this listing.

Fits

• This item is not on the spare parts list available for this listing. The only EsyBox Max sheet obtainable is ESYBOX MAX 45/120 M208-240 PUMP/AUS2, revision N.1, document code 60217359, and SP00007138 does not appear anywhere on it. The equivalent slot on that sheet, position 103, carries a different item: (SP) ESYBOXMAX - HMI ASS.Y 60/120 M, item no. SP00006686, without the CSA suffix. We are not mapping this CSA part to that AU position.
• DAB's own description names the model as 60/120 M. The DAB EsyBox Max manual for North America, section 1.5, lists the 60/120 M as the single-phase machine, against the 60/120 T and 85/120 T, which are three phase. An interface module specified for the single-phase machine should not be assumed to suit a three-phase one.
• Inside that same 45/120 M208-240 sheet, DAB names other assemblies for a different model: position 103 is HMI Ass.y 60/120 M and position 117 is Pump Ass.y 60/120M. DAB's single-phase assemblies are therefore not named uniquely per model. Treat that as evidence of overlap across the single-phase range, not as confirmation of fitment for a specific machine.
• Manual section 7 describes the keypad and display for the EsyBox Max without distinguishing between the models the manual covers, but the manual does not identify spare part numbers for it, so it cannot confirm which HMI item number belongs to which machine.

Before You Order

• Attention: check the correspondence with the revision of your product. That caution is printed across the header of DAB's spare parts sheets, and it applies with extra force here: there is no sheet in hand that lists this item at all.
• Verify this item number against DAB documentation for your own machine before ordering. The AU/Schuko sheet is not a fitment reference for CSA parts. The same divergence shows on the main board: the AU sheet's position 104 is SP00006688, a different item number from the CSA main board.
• The CSA suffix indicates the North American variant of the assembly. Order the CSA item for a CSA machine and the non-CSA item, SP00006686, for a machine built to the AU sheet.
• No position number, exploded-view callout, removal procedure or failure symptom for the HMI assembly is published in either document used here. DAB's maintenance chapter covers the accessory tool, emptying the system, the non-return valve, the motor shaft and the expansion vessel, and nothing on the interface module.