{"product_id":"dramm-proline-station-expansion-module","title":"Dramm - ProLine Station Expansion Module","description":"\u003ch2\u003eProLine Station Expansion Module\u003c\/h2\u003e\u003cp\u003ePlug-in output modules that add stations to an installed ProLine controller. The controller chassis carries a set of expansion ports; a module drops into a port and brings its own screwless valve terminals with it, so growing the system means adding a module rather than swapping the controller. The 4 Station Module occupies one port. The 12 Station Module is double width and uses two expansion ports, which is the detail that decides whether it will fit your cabinet.\u003c\/p\u003e\u003cp\u003eWork out the gap between the stations you have and the stations you need, then count the free expansion ports before you order. The 4 Station Module adds four outputs in a single port and is how a controller is stepped up in fours toward the 16 valve mark. The 12 Station Module adds twelve outputs in one move and is what carries a controller to the 24 output platform maximum, but because it uses two expansion ports it will not go into a chassis with only one port free. Dramm lists the 4, 8 and 12 station ProLine controllers, and the 12 station model built on a 12 station base, as expandable; those are the units these modules are made for. If the controller reports zero zones or drops a bank of outputs, the module in that position is also the field-replaceable part.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStations added\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 (4 Station Module) or 12 (12 Station Module)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExpansion ports used\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne (4 Station Module) or two (12 Station Module)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProLine 1600 series controllers that Dramm lists as expandable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController maximum\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTerminals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eScrewless valve terminals on the module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSold as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eStations\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 Station Module\u003c\/td\u003e\n\u003ctd\u003ePL-SLM4-1600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 Station Module - uses two expansion ports\u003c\/td\u003e\n\u003ctd\u003ePL-SLM12-1600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds 4 or 12 stations to an installed ProLine controller without replacing the chassis\u003c\/li\u003e\n\u003cli\u003eThe 4 Station Module takes a single expansion port\u003c\/li\u003e\n\u003cli\u003eThe 12 Station Module is double width and takes two expansion ports\u003c\/li\u003e\n\u003cli\u003eScrewless valve terminals; a wire is released by pushing back the orange slide trigger with a small screwdriver\u003c\/li\u003e\n\u003cli\u003eInstalls into a free expansion port inside the controller cabinet, no panel rework required\u003c\/li\u003e\n\u003cli\u003eController diagnostics report a missing or defective module by position, so a failed bank of outputs can be traced and swapped\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdding a bench, bay or valve group to a greenhouse controller that is already wired in\u003c\/li\u003e\n\u003cli\u003eStepping a 4 or 8 station controller up as a range is built out in phases\u003c\/li\u003e\n\u003cli\u003eTaking a 12 station base controller toward 20 or 24 outputs\u003c\/li\u003e\n\u003cli\u003eHolding a spare on the shelf so a failed output bank can be replaced without pulling the controller\u003c\/li\u003e\n\u003cli\u003eSpecifying a small controller at install and budgeting the expansion into a later phase\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThese modules fit the Dramm ProLine Irrigation Controller, PL1600-04 through PL1600-24, driving Dramm solenoid valves.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"4 Station Module","offer_id":52800840466743,"sku":"PL-SLM4-1600","price":180.8,"currency_code":"USD","in_stock":true},{"title":"12 Station Module - uses two expansion ports","offer_id":52800840499511,"sku":"PL-SLM12-1600","price":588.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dramm-proline-expansion-module_4-station_PL-SLM4-1600.jpg?v=1786404392","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-proline-station-expansion-module","provider":"BLACK LABEL","version":"1.0","type":"link"}