{"product_id":"dramm-polyloc-elbow-fitting","title":"Dramm - PolyLoc Elbow Fitting","description":"\u003ch2\u003ePolyLoc Elbow Fitting\u003c\/h2\u003e\u003cp\u003eA 90 degree corner fitting for a PE irrigation lateral. One leg is a PolyLoc compression port onto the tubing, 16mm on the 16mm option and 25mm on the three 25mm options; the other leg is either a female pipe thread or a second PolyLoc port. Growers use them to turn a lateral at the end of a bench or bay and to drop a run onto a threaded riser or valve.\u003c\/p\u003e\u003cp\u003eStart with the PE size: one option takes 16mm tubing, three take 25mm. Then the outlet. The Female Thread (FPT) options finish in a female pipe thread and cover 16mm x 3\/4 in, 25mm x 3\/4 in and 25mm x 1 in, so pick the thread that matches the riser, valve or cap already in place. The single PolyLoc Compression option, 25mm x 25mm, is tubing on both legs and has no thread to seal - that is the one for a corner in the middle of a 25mm run.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePE leg\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16mm on the 16mm option; 25mm on the three 25mm options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSecond leg\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA 3\/4 in or 1 in female pipe thread on the threaded options; a second 25mm PolyLoc compression port on the 25mm x 25mm option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAngle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90 degrees on every option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTubing it fits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDramm 16mm PE lateral tubing in 100 ft, 500 ft and 1000 ft, and 25mm PE lateral tubing in 110 ft and 330 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFamily\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolyLoc, which Dramm sizes in 16mm and 25mm only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eOutlet Connection\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e16mm x 3\/4 in\u003c\/td\u003e\n\u003ctd\u003eFemale Thread (FPT)\u003c\/td\u003e\n\u003ctd\u003ePLEFF-16075\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25mm x 3\/4 in\u003c\/td\u003e\n\u003ctd\u003eFemale Thread (FPT)\u003c\/td\u003e\n\u003ctd\u003ePLEFF-25075\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25mm x 1 in\u003c\/td\u003e\n\u003ctd\u003eFemale Thread (FPT)\u003c\/td\u003e\n\u003ctd\u003ePLEFF-251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25mm x 25mm\u003c\/td\u003e\n\u003ctd\u003ePolyLoc Compression\u003c\/td\u003e\n\u003ctd\u003ePLE-2525\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTurns a lateral through 90 degrees without coiling a loop of tubing at the corner\u003c\/li\u003e\n\u003cli\u003eThreaded options screw onto PVC risers, valve outlets and threaded caps\u003c\/li\u003e\n\u003cli\u003eThe 25mm x 25mm option keeps the corner all tubing, with no thread to seal\u003c\/li\u003e\n\u003cli\u003eGrip rings and coupling nuts stocked separately in both sizes for rebuilding a joint\u003c\/li\u003e\n\u003cli\u003eShares tubing sizes with the PolyLoc tees, couplings, adaptors and valves on the same run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTurning a lateral at the end of a bench, bed or bay\u003c\/li\u003e\n\u003cli\u003eDropping a lateral onto a threaded PVC riser or valve\u003c\/li\u003e\n\u003cli\u003eEnding a run into a threaded cap or shut-off\u003c\/li\u003e\n\u003cli\u003eCornering a 25mm main run without a threaded joint\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePolyLoc is Dramm's compression fitting family for 16mm and 25mm PE tubing, EasyLoc is the separate barb-and-nut family Dramm makes in 16mm only, and PolyRail is the aluminum extrusion that same tubing snaps into; PipeLoc is an unrelated Dramm line for large PVC pipe and shares no parts with any of them.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"16mm x 3\/4 in \/ Female Thread (FPT)","offer_id":52800279183671,"sku":"PLEFF-16075","price":4.66,"currency_code":"USD","in_stock":true},{"title":"25mm x 3\/4 in \/ Female Thread (FPT)","offer_id":52800279216439,"sku":"PLEFF-25075","price":5.56,"currency_code":"USD","in_stock":true},{"title":"25mm x 1 in \/ Female Thread (FPT)","offer_id":52800279249207,"sku":"PLEFF-251","price":5.56,"currency_code":"USD","in_stock":true},{"title":"25mm x 25mm \/ PolyLoc Compression","offer_id":52800279281975,"sku":"PLE-2525","price":5.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/P8060023-X3.jpg?v=1786142516","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-polyloc-elbow-fitting","provider":"BLACK LABEL","version":"1.0","type":"link"}