{"product_id":"dramm-poly-pipe-thread-adaptor","title":"Dramm - Poly Pipe Thread Adaptor","description":"\u003ch2\u003ePoly Pipe Thread Adaptor\u003c\/h2\u003e\u003cp\u003eThread adaptors step between the threaded plumbing that feeds a bench and whatever is on the other side of the joint. Dramm lists the male pipe thread to insert adaptor among the standard end fittings for a PolyRail or JetRain lateral, where it is what the poly actually lands on at the supply end of the run. The second part on this page is a straight threaded reducer with no barb on it at all. Read the Connection option before you order, because only one of the two takes tubing.\u003c\/p\u003e\u003cp\u003ePick by what is on each side of the joint. Choose 1\/2 in MPT x 25mm Insert Barb when a threaded port has to feed polyethylene lateral line directly: the 1\/2 in male pipe thread screws into the port and the stepped Insert Barb pushes into 25mm poly, the larger of the two lateral sizes Dramm runs. That end is a barb, so allow a clamp over the tube. Choose 1 in Male Thread x 3\/4 in Female Thread when both sides of the joint are threaded and you are stepping a 1 in outlet down to a 3\/4 in valve, fitting or lateral; it has no barbed end and will not accept tubing. If you are joining poly to poly rather than thread to poly, a barbed coupling is the fitting you want instead of either of these.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2 in MPT x 25mm Insert Barb, or 1 in Male Thread x 3\/4 in Female Thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupply side\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMale pipe thread on both parts, 1\/2 in or 1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutlet side\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25mm insert barb on the 1\/2 in MPT part; 3\/4 in Female Thread on the 1 in part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTubing compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDramm 25mm polyethylene lateral line, on the insert barb part only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdapting a threaded outlet onto poly lateral line, or reducing 1 in thread to 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2 in MPT x 25mm Insert Barb\u003c\/td\u003e\n\u003ctd\u003eVMIA05025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 in Male Thread x 3\/4 in Female Thread\u003c\/td\u003e\n\u003ctd\u003ePLFMF-1075\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/2 in MPT x 25mm Insert Barb takes a threaded port straight onto 25mm polyethylene lateral line.\u003c\/li\u003e\n\u003cli\u003eDramm lists the male pipe thread to insert adaptor among the standard end fittings on a PolyRail or JetRain lateral.\u003c\/li\u003e\n\u003cli\u003eStepped insert barb enters the tube bore and holds under a clamp.\u003c\/li\u003e\n\u003cli\u003e1 in Male Thread x 3\/4 in Female Thread reduces a 1 in threaded outlet to 3\/4 in with no tubing connection involved.\u003c\/li\u003e\n\u003cli\u003eBoth connections present a male thread on the supply side.\u003c\/li\u003e\n\u003cli\u003eThread size is moulded into the body of the 1\/2 in MPT adaptor, so it can be identified after it is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnecting a valve station or manifold outlet to a 25mm poly lateral.\u003c\/li\u003e\n\u003cli\u003eBuilding the supply end of a PolyRail or JetRain lateral.\u003c\/li\u003e\n\u003cli\u003eStepping a 1 in header takeoff down to a 3\/4 in valve or lateral.\u003c\/li\u003e\n\u003cli\u003eRebuilding a bench feed after a layout change.\u003c\/li\u003e\n\u003cli\u003eAdapting an existing threaded riser to poly during a system upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePair these with Dramm 25mm PE tubing, PolyRail extrusion, valve stations and multi-outlet manifolds, and the threaded cap with washer that closes the outlets you do not use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"1\/2 in MPT x 25mm Insert Barb","offer_id":52800844136759,"sku":"VMIA05025","price":2.08,"currency_code":"USD","in_stock":true},{"title":"1 in Male Thread x 3\/4 in Female Thread","offer_id":52800844169527,"sku":"PLFMF-1075","price":2.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/P8060029-X5.jpg?v=1786150771","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-poly-pipe-thread-adaptor","provider":"BLACK LABEL","version":"1.0","type":"link"}