{"product_id":"dramm-md-9-spray-gun-nozzle","title":"Dramm - MD-9 Spray Gun Nozzle","description":"\u003ch2\u003eMD-9 Spray Gun Nozzle\u003c\/h2\u003e\u003cp\u003eReplacement orifice tips for the MD-9, the adjustable stainless steel spray gun Dramm offers with its Hydra sprayer line. The tip is what sets how much solution the gun puts out, how far it throws and how fine the droplets are, so changing it is how one gun covers several jobs.\u003c\/p\u003e\u003cp\u003eMatch the tip to what the machine can actually deliver first, then to the work. The numbering maps to orifices exactly: No. 2 is 0.8 mm, No. 4 is 1.5 mm, No. 5 is 2.0 mm, No. 6 is 2.5 mm and No. 8 is 3.0 mm, with No. 6 marked as the factory standard and the other four as options. That standard is not arbitrary - Dramm's Hydra puts out 4 gpm, about 15 L\/min, which lands inside the 2.5 mm band, while the 3.0 mm tip asks the sprayer for 30 to 60 L\/min and will starve on a Hydra. Within what your pump supports, going smaller buys finer work and less run-off but costs reach: the 0.8 mm throws 4 m against 9 m for the 3.0 mm. All five occupy the same position in the gun, so any of them fits any MD-9 and tips can be changed as the job changes. There is no 1.2 mm tip in this range - the numbering steps straight from No. 2 at 0.8 mm to No. 4 at 1.5 mm - and although Dramm's chart carries 3.5, 4.0 and 4.5 mm rows, no MD-9 tip exists behind them.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGun\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMD-9 adjustable stainless steel spray gun for Dramm Hydra sprayers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCatalog number to orifice\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo. 2 = 0.8 mm; No. 4 = 1.5 mm; No. 5 = 2.0 mm; No. 6 = 2.5 mm; No. 8 = 3.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGun spray volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.8 mm 0.3 to 0.5 gpm; 1.5 mm 0.5 to 2.0 gpm; 2.0 mm 1.0 to 3.0 gpm; 2.5 mm 2.0 to 5.0 gpm; 3.0 mm 3.0 to 7.0 gpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum spray distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.8 mm 4 m; 1.5 mm 6 m; 2.0 mm 7.5 m; 2.5 mm 8 m; 3.0 mm 9 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSprayer volume required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.8 mm and 1.5 mm 7 to 10 L\/min; 2.0 mm and 2.5 mm 14 to 30 L\/min; 3.0 mm 30 to 60 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum gun pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e800 psi, all five tips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFactory fitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 mm (No. 6) is the standard tip; the other four are options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterchange\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll five are alternates for the same position in the gun, so any one fits any MD-9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSizes not made\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo 1.2 mm tip exists for this gun; the numbering steps from No. 2 at 0.8 mm to No. 4 at 1.5 mm. Dramm's chart also lists 3.5, 4.0 and 4.5 mm rows, but no orderable MD-9 tip exists for them\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlow figures\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTaken from Dramm's published specification chart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOrifice\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 mm - No. 2\u003c\/td\u003e\n\u003ctd\u003e842441\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.5 mm - No. 4\u003c\/td\u003e\n\u003ctd\u003e842442\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.0 mm - No. 5\u003c\/td\u003e\n\u003ctd\u003e842443\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5 mm - No. 6\u003c\/td\u003e\n\u003ctd\u003e840925\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.0 mm - No. 8\u003c\/td\u003e\n\u003ctd\u003e842444\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA full engineering chart per tip - volume, reach and the sprayer output each size demands - not just an orifice size\u003c\/li\u003e\n\u003cli\u003e2.5 mm is the factory tip and matches a Hydra's 4 gpm output; the 3.0 mm would want 30 to 60 L\/min\u003c\/li\u003e\n\u003cli\u003eGoing smaller buys finer droplets and less run-off but costs reach, 4 m against 9 m across the range\u003c\/li\u003e\n\u003cli\u003eAll five share the same 800 psi maximum gun pressure\u003c\/li\u003e\n\u003cli\u003eAll five drop into the same position in the gun, so a tip change takes minutes\u003c\/li\u003e\n\u003cli\u003eOEM nozzles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInsecticide, fungicide, sanitizer and growth regulator application from a Hydra sprayer\u003c\/li\u003e\n\u003cli\u003eClose-in fine work with the 0.8 mm and 1.5 mm tips\u003c\/li\u003e\n\u003cli\u003eLong throw and tall targets with the 2.5 mm and 3.0 mm tips\u003c\/li\u003e\n\u003cli\u003eMatching gun output to a smaller pump or a smaller engine\u003c\/li\u003e\n\u003cli\u003eRestoring an MD-9 gun that has lost or worn its tip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFits the MD-9 gun on Dramm's Hydra sprayer line and mounts through the male stainless steel quick connect; Dramm's MS40-TG Turbo gun is a different gun with its own tips and no published cross-reference to these.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"0.8 mm - No. 2","offer_id":52800106791223,"sku":"842441","price":32.56,"currency_code":"USD","in_stock":true},{"title":"1.5 mm - No. 4","offer_id":52800106823991,"sku":"842442","price":32.56,"currency_code":"USD","in_stock":true},{"title":"2.0 mm - No. 5","offer_id":52800106856759,"sku":"842443","price":32.56,"currency_code":"USD","in_stock":true},{"title":"2.5 mm - No. 6","offer_id":52800106889527,"sku":"840925","price":32.56,"currency_code":"USD","in_stock":true},{"title":"3.0 mm - No. 8","offer_id":52800106922295,"sku":"842444","price":32.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/MD9.jpg?v=1786404372","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-md-9-spray-gun-nozzle","provider":"BLACK LABEL","version":"1.0","type":"link"}