{"product_id":"dramm-easyloc-16mm-in-line-isolation-valve","title":"Dramm - EasyLoc 16mm In-Line Isolation Valve","description":"\u003ch2\u003eEasyLoc 16mm In-Line Isolation Valve\u003c\/h2\u003e\u003cp\u003eA lever-handled shut-off that goes straight into a 16mm polyethylene lateral, so one bench, bay or zone can be isolated while the rest of the house keeps running. Dramm describes it as shutting off the PE line, inserted as needed, on a barb and compression nut joint that needs no additional clamp. The outlet is a 16mm EasyLoc barb on every option, so the only thing you are choosing is what the inlet has to connect to upstream. EasyLoc is built in 16mm only; a 25mm line takes the PolyLoc in-line ball valve instead.\u003c\/p\u003e\u003cp\u003ePick by the upstream connection. 16mm PE x 16mm PE is a barb at both ends, for cutting a shut-off into an existing lateral part way along its length or for putting a valve between two rolls. 1\/2 in MPT x 16mm PE and 3\/4 in MPT x 16mm PE swap the inlet barb for a male pipe thread, so the valve screws straight into a PVC header, a valve station or any threaded outlet and starts the lateral with its own shut-off; Dramm's own wording for the threaded build is Connect PVC to PE, and the only difference between the two is which thread size the header presents. No. 400 Barb x 16mm PE is the grommet take-off build: instead of a thread the inlet is a No. 400 barbed spigot, which seats in the Dramm No. 400 top hat grommet, part ITG400TH, dropped into a 14mm or 9\/16 in hole drilled in the supply pipe. Use that one when you would rather drill and grommet the main than thread or tap it, and order the grommet with it because the valve does not include one. The 16mm EasyLoc outlet is identical on all four, so nothing about the lateral side of the job changes with the choice.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutlet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16mm EasyLoc barb on all four options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInlet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA second 16mm EasyLoc barb, a 1\/2 in male pipe thread, a 3\/4 in male pipe thread, or a No. 400 barbed take-off spigot, according to the option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValve type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBall valve with a lever handle; Dramm lists the 16mm x 16mm build as an EasyLoc ball valve and the threaded builds as EasyLoc PE isolation valves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJoint on the 16mm side\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBarb plus compression nut; in Dramm's words, needs no additional clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGrommet for the No. 400 option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDramm No. 400 top hat grommet, part ITG400TH, which requires a 14mm or 9\/16 in drill; supplied separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTubing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDramm 16mm PE lateral tubing; Dramm supplies its PE tubing in 16mm and 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFamily scope\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEasyLoc is made in 16mm only, so every option here is a 16mm lateral fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo. 400 Barb x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITV400SL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16mm PE x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITVSL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2 in MPT x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITV050SL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in MPT x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITV075SL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIsolates a single bench, bay or zone without shutting down the house\u003c\/li\u003e\n\u003cli\u003eCuts into an existing 16mm lateral in line, with the same barb and nut joint used across the EasyLoc range\u003c\/li\u003e\n\u003cli\u003eMale pipe thread builds put a shut-off directly at the PVC header or valve station outlet\u003c\/li\u003e\n\u003cli\u003eThe No. 400 build takes off through a drilled grommet, so the main does not have to be threaded or tapped\u003c\/li\u003e\n\u003cli\u003eBarb and compression nut joint that Dramm states needs no additional clamp\u003c\/li\u003e\n\u003cli\u003eLever handle gives a clear visual of open or closed along a bench run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIsolating a bench, bay or zone for repair while the rest of the house runs\u003c\/li\u003e\n\u003cli\u003eBalancing or shutting down individual laterals on a long mist or overhead run\u003c\/li\u003e\n\u003cli\u003eStarting a lateral off a PVC header outlet with its own shut-off\u003c\/li\u003e\n\u003cli\u003eTaking a valved lateral off a poly or PVC main through a drilled grommet\u003c\/li\u003e\n\u003cli\u003eSeasonal shut-off of a bay that is out of production\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePolyLoc is Dramm's compression fitting family for 16mm and 25mm PE tubing and carries the 25mm in-line ball valve, EasyLoc is the separate 16mm barb-and-nut family this valve belongs to, PolyRail is the aluminum extrusion the same 16mm tubing sleeves into, and the No. 400 top hat grommet, ITG400TH, is listed with Dramm's poly tubing clips and clamps.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"16mm PE x 16mm PE","offer_id":52800283509047,"sku":"ITVSL16","price":5.92,"currency_code":"USD","in_stock":true},{"title":"1\/2 in MPT x 16mm PE","offer_id":52800283541815,"sku":"ITV050SL16","price":5.92,"currency_code":"USD","in_stock":true},{"title":"3\/4 in MPT x 16mm PE","offer_id":52811342250295,"sku":"ITV075SL16","price":5.92,"currency_code":"USD","in_stock":true},{"title":"No. 400 Barb x 16mm PE","offer_id":52811342283063,"sku":"ITV400SL16","price":3.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/DRMITVSL16.jpg?v=1786133159","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-easyloc-16mm-in-line-isolation-valve","provider":"BLACK LABEL","version":"1.0","type":"link"}