{"product_id":"dramm-easyloc-16mm-elbow","title":"Dramm - EasyLoc 16mm Elbow","description":"\u003ch2\u003eEasyLoc 16mm Elbow\u003c\/h2\u003e\u003cp\u003eA 90 degree corner fitting for 16mm polyethylene lateral, using the same EasyLoc barb and reverse-threaded compression nut as the rest of the family. The inlet leg is a 16mm EasyLoc barb on both options; the outlet is either a second 16mm barb or a 3\/4 in female hose thread swivel. Dramm's stated use is 90 degree corners in a manifold layout.\u003c\/p\u003e\u003cp\u003eOne choice: the outlet leg. The 16mm PE option is a second EasyLoc barb, for turning a lateral at the end of a bench, bed or bay and carrying on in tubing. The 3\/4 in FHT Swivel option puts a female hose thread on the turn, so a run can start at a hose bib or end in a hose-thread cap or connection without an adaptor; HF in the part number is Dramm's code for female hose thread. Both are 16mm on the inlet, and EasyLoc is not made in 25mm - for a 25mm corner, look to the PolyLoc elbows.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInlet leg\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16mm EasyLoc barb on both options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutlet leg\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA second 16mm EasyLoc barb on the 16mm PE option; a 3\/4 in female hose thread swivel on the FHT option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJoint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBarb plus reverse-threaded compression nut; Dramm: 'Needs no additional clamp'\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThe nut stays on the fitting, the tubing pushes fully onto the barb, then the nut reverse-threads over the tubing and is hand tightened only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAngle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90 degrees on both options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTubing it fits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDramm 16mm PE lateral tubing, supplied in 100 ft, 500 ft and 1000 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem limit Dramm publishes for a 16mm manifold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater pressure not to exceed 60 psi at the head; above that a regulator is required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOutlet Connection\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e16mm PE\u003c\/td\u003e\n\u003ctd\u003eITESL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in FHT Swivel\u003c\/td\u003e\n\u003ctd\u003eITEHFSL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDramm's stated use is 90 degree corners in a 16mm manifold layout\u003c\/li\u003e\n\u003cli\u003eHand-tightened barb and nut joint that Dramm states needs no additional clamp\u003c\/li\u003e\n\u003cli\u003eThe nut stays captive on the fitting during assembly\u003c\/li\u003e\n\u003cli\u003eThe FHT swivel option starts a run at a hose bib or ends it in a hose-thread cap\u003c\/li\u003e\n\u003cli\u003eBoth options work on the same 16mm lateral that PolyRail carries and 3mm punches open\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e90 degree corners in a 16mm manifold layout\u003c\/li\u003e\n\u003cli\u003eTurning a lateral at the end of a bench, bed or bay\u003c\/li\u003e\n\u003cli\u003eEnding a run into a hose-threaded cap or hose connection\u003c\/li\u003e\n\u003cli\u003eStarting a lateral from a hose bib\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePolyLoc is Dramm's compression fitting family for 16mm and 25mm PE tubing, EasyLoc is the separate barb-and-nut family Dramm makes in 16mm only, and PolyRail is the aluminum extrusion that same tubing snaps into; PipeLoc is an unrelated Dramm line for large PVC pipe and shares no parts with any of them.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"16mm PE","offer_id":52800280789303,"sku":"ITESL16","price":4.36,"currency_code":"USD","in_stock":true},{"title":"3\/4 in FHT Swivel","offer_id":52800280822071,"sku":"ITEHFSL16","price":4.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/ITESL16.jpg?v=1786404372","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-easyloc-16mm-elbow","provider":"BLACK LABEL","version":"1.0","type":"link"}