{"product_id":"dramm-easyloc-16mm-coupling-and-thread-adaptor","title":"Dramm - EasyLoc 16mm Coupling and Thread Adaptor","description":"\u003ch2\u003eEasyLoc 16mm Coupling and Thread Adaptor\u003c\/h2\u003e\u003cp\u003eThe straight-through EasyLoc parts for 16mm polyethylene lateral: a plain coupling, two male pipe thread adaptors and a female hose thread swivel adaptor. Every option carries a 16mm EasyLoc barb on the tubing side with the compression nut that Dramm says needs no additional clamp, so only the far end differs. The threaded options are how a PE lateral or manifold gets onto a PVC header, a valve station or a hose. EasyLoc is made in 16mm only, so there is no 25mm equivalent in this family.\u003c\/p\u003e\u003cp\u003eThe tubing end is the same on all four, so the decision is entirely about the other end. 16mm PE x 16mm PE is barb to barb, for joining two rolls or splicing a damaged length out of a run. 1\/2 in MPT x 16mm PE and 3\/4 in MPT x 16mm PE put a male pipe thread on the far end, in 1\/2 in or 3\/4 in, which screws into a PVC header, a valve or a valve station; Dramm's description of these is Connect PVC to PE, and the two differ only in the thread size the supply presents, so match whatever is already there rather than adapting. 3\/4 in FHT Swivel x 16mm PE puts a female hose thread swivel on the far end instead, for starting a run at a hose bib or finishing it at a hose-threaded filter, and the swivel means the fitting can be tightened without twisting the tubing behind it. If you also want a shut-off at that point, the EasyLoc in-line isolation valve is the same joint with a valve built into it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTubing end\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16mm EasyLoc barb on all four options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFar end\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA second 16mm EasyLoc barb, a 1\/2 in male pipe thread, a 3\/4 in male pipe thread, or a 3\/4 in female hose thread swivel, according to the option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJoint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBarb plus compression nut; in Dramm's words, needs no additional clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDirection of flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStraight through on every option; none of these fittings branches or shuts off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTubing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDramm 16mm PE lateral tubing; Dramm supplies its PE tubing in 16mm and 25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFamily scope\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEasyLoc is made in 16mm only, so every option here is a 16mm lateral fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e16mm PE x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITCSL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2 in MPT x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITF050SL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in MPT x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITF075SL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in FHT Swivel x 16mm PE\u003c\/td\u003e\n\u003ctd\u003eITFHFSL16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJoins or repairs a 16mm run without a clamp, on Dramm's own barb and compression nut joint\u003c\/li\u003e\n\u003cli\u003eTwo male pipe thread sizes, so the fitting matches the header rather than needing a thread adaptor\u003c\/li\u003e\n\u003cli\u003eThe female hose thread swivel tightens without winding up the tubing behind it\u003c\/li\u003e\n\u003cli\u003eSame 16mm barb across the whole EasyLoc range, so couplings, elbows, tees and valves share one tubing joint\u003c\/li\u003e\n\u003cli\u003eDramm lists EasyLoc fittings among the standard parts of the PolyRail system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJoining two rolls of 16mm PE to extend a lateral or manifold\u003c\/li\u003e\n\u003cli\u003eSplicing a damaged section out of a 16mm run\u003c\/li\u003e\n\u003cli\u003eConnecting a PVC header, valve or valve station to a PE lateral\u003c\/li\u003e\n\u003cli\u003eAttaching a hose or a hose-threaded filter to the end of a lateral\u003c\/li\u003e\n\u003cli\u003eTerminating a PolyRail run at a supply point\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe EasyLoc 16mm tee, elbow and in-line isolation valve share this same barb and nut joint, PolyLoc is Dramm's separate compression fitting family for 16mm and 25mm PE, and PolyRail is the aluminum extrusion the same 16mm tubing sleeves into.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"16mm PE x 16mm PE","offer_id":52800283410743,"sku":"ITCSL16","price":1.9,"currency_code":"USD","in_stock":true},{"title":"1\/2 in MPT x 16mm PE","offer_id":52800283443511,"sku":"ITF050SL16","price":3.46,"currency_code":"USD","in_stock":true},{"title":"3\/4 in MPT x 16mm PE","offer_id":52811374919991,"sku":"ITF075SL16","price":3.46,"currency_code":"USD","in_stock":true},{"title":"3\/4 in FHT Swivel x 16mm PE","offer_id":52800283476279,"sku":"ITFHFSL16","price":4.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/ITCSL16.jpg?v=1786404372","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-easyloc-16mm-coupling-and-thread-adaptor","provider":"BLACK LABEL","version":"1.0","type":"link"}