{"product_id":"dramm-colorstorm-hose-fitting-and-ferrule-set-12-pack","title":"Dramm - ColorStorm Hose Fitting and Ferrule Set, 12 Pack","description":"\u003ch2\u003eColorStorm Hose Fitting and Ferrule Set, 12 Pack\u003c\/h2\u003e\u003cp\u003eBags of twelve nickel plated machined brass hose fittings with their matching brass ferrules, for building and repairing lengths of Dramm ColorStorm rubber hose. The ferrule slides over the cut hose end, the barbed fitting is pushed in through it, and the ferrule is crimped in the DrammPress, producing the same joint Dramm puts on its factory assembled hose. Dramm's own note is that because the crimper uses its ferrules there is no need for ring bands or gear clamps. Greenhouses and nurseries buy these to make hose to the length a bay actually needs instead of ordering stock lengths.\u003c\/p\u003e\u003cp\u003eThere are two choices. Hose Size is the inside diameter of the hose the ferrule crimps onto, 5\/8 in or 3\/4 in, and it is not a thread size, so measure the hose bore rather than the coupling and fit the press jaws that match that bore. Fitting Type is what the end becomes: Male Coupling and Female Coupling each terminate one hose end, so re-ending a hose normally takes one bag of each, while Splice \/ Mender is a double-ended barb that joins two lengths or closes the gap where a damaged section has been cut out. Every bag holds 12 fittings with 12 matching ferrules whichever pair you choose.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHose Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5\/8 in or 3\/4 in, measured as the hose inside diameter and not as a thread size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitting Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMale Coupling and Female Coupling each terminate one hose end; Splice \/ Mender is a double-ended barb that joins two hose lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePack\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 fittings with 12 matching ferrules on every option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNickel plated machined brass fittings and brass ferrules, the same parts used on Dramm factory assembled hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDrammPress frame 72620 with the jaw set that matches the hose bore, 72625 for 5\/8 in or 72750 for 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClamps\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDramm: because the hose crimper uses Dramm's high quality ferrules, there is no need for ring bands or gear clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShip weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 lb per set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eHose Size\u003c\/th\u003e\n\u003cth\u003eFitting Type\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/8 in\u003c\/td\u003e\n\u003ctd\u003eMale Coupling\u003c\/td\u003e\n\u003ctd\u003e10-17810\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/8 in\u003c\/td\u003e\n\u003ctd\u003eFemale Coupling\u003c\/td\u003e\n\u003ctd\u003e10-17815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in\u003c\/td\u003e\n\u003ctd\u003eMale Coupling\u003c\/td\u003e\n\u003ctd\u003e10-17820\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/8 in\u003c\/td\u003e\n\u003ctd\u003eSplice \/ Mender\u003c\/td\u003e\n\u003ctd\u003e10-17830\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in\u003c\/td\u003e\n\u003ctd\u003eFemale Coupling\u003c\/td\u003e\n\u003ctd\u003e10-17825\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in\u003c\/td\u003e\n\u003ctd\u003eSplice \/ Mender\u003c\/td\u003e\n\u003ctd\u003e10-17840\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMakes hose to an exact length instead of ordering stock lengths\u003c\/li\u003e\n\u003cli\u003eCrimped ferrule joint needs no ring bands or gear clamps\u003c\/li\u003e\n\u003cli\u003eNickel plated machined brass, the same fittings and ferrules used on Dramm factory hose\u003c\/li\u003e\n\u003cli\u003eSplice sets rebuild a hose cut in the middle instead of scrapping the run\u003c\/li\u003e\n\u003cli\u003eTwelve to a bag, enough to re-end a run of hoses in one session\u003c\/li\u003e\n\u003cli\u003eSized by hose inside diameter so fitting, ferrule and press jaws all key off one number\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaking hose to an exact length for a bay or a hose station\u003c\/li\u003e\n\u003cli\u003eRepairing a hose end that has been crushed, cut or pulled off\u003c\/li\u003e\n\u003cli\u003eJoining two shorter hoses into one long run\u003c\/li\u003e\n\u003cli\u003eRe-ending factory hose in house with the same fittings the factory used\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCrimped with the DrammPress frame 72620 and its 72625 or 72750 jaws onto Dramm ColorStorm bulk hose 17999-330 and 17989-330, and supplied in quantity inside the Custom Hose Starter Kits 17626 and 17751.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"5\/8 in \/ Male Coupling","offer_id":52800289505591,"sku":"10-17810","price":98.76,"currency_code":"USD","in_stock":true},{"title":"5\/8 in \/ Female Coupling","offer_id":52800289538359,"sku":"10-17815","price":103.62,"currency_code":"USD","in_stock":true},{"title":"5\/8 in \/ Splice \/ Mender","offer_id":52800289636663,"sku":"10-17830","price":158.84,"currency_code":"USD","in_stock":true},{"title":"3\/4 in \/ Male Coupling","offer_id":52800289571127,"sku":"10-17820","price":137.84,"currency_code":"USD","in_stock":true},{"title":"3\/4 in \/ Female Coupling","offer_id":52800289603895,"sku":"10-17825","price":168.56,"currency_code":"USD","in_stock":true},{"title":"3\/4 in \/ Splice \/ Mender","offer_id":52800289669431,"sku":"10-17840","price":176.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/fitting-ferrule-set-for-colorstorm-hose-2125104_487ca220-882c-43f4-be85-a8f049d63ed0.jpg?v=1786399601","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-colorstorm-hose-fitting-and-ferrule-set-12-pack","provider":"BLACK LABEL","version":"1.0","type":"link"}