{"product_id":"dramm-360-degree-misty-mist-nozzle","title":"Dramm - 360 Degree Misty Mist Nozzle","description":"\u003ch2\u003e360 Degree Misty Mist Nozzle\u003c\/h2\u003e\u003cp\u003eThe fine end of Dramm's 360 degree overhead range - small orifices that break water into mist rather than a shower, for propagation benches, plug irrigation, humidity and mist cooling. This page carries two genuinely different nozzles: the three standard Misty Mists, which run on an ordinary greenhouse line, and the High Pressure Grey\/White, which is built for 73 to 435 psi off a high pressure pump. All flow figures below are gallons per minute.\u003c\/p\u003e\u003cp\u003eDecide standard or high pressure first, because that choice is not a matter of degree. The three standard Misty Mists throw a 6 ft pattern from a line 5 ft above the crop, mount topside, bottom side or on 1\/2 in PVC risers, and install with a Dramm Assembly Insert; within them colour is the orifice and the orifice is the flow - Blue\/White 1.00 mm at 0.17 gpm at 36 psi, Red\/White 1.25 mm at 0.27 gpm, Black\/White 1.50 mm at 0.39 gpm. Dramm names Blue\/White specifically for raising humidity and mist cooling, on short automated cycles because of its output, with the line hung as high as the bay allows and nozzles 6 ft apart. The High Pressure Grey\/White is a different nozzle: a 0.75 mm orifice giving 0.12 gpm at 73 psi, a 10 ft pattern, 10 ft spacing, topside mounting only, and no Assembly Insert - the pipeline has to be drilled and tapped 3\/8 Whitworth directly. It also requires a high pressure pump and filtration equipment to work at all, so ordering it for a 30 psi house line will not produce mist.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePattern\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard Misty Mist 6 ft diameter with the pipeline 5 ft above the crop; High Pressure Grey\/White 10 ft diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrifice\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlue\/White 1.00 mm; Red\/White 1.25 mm; Black\/White 1.50 mm; High Pressure Grey\/White 0.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlow, standard nozzles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlue\/White 0.17 gpm at 36 psi and 0.22 gpm at 73 psi; Red\/White 0.27 and 0.35 gpm; Black\/White 0.39 and 0.50 gpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlow, High Pressure Grey\/White\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.12 gpm at 73 psi; 0.19 gpm at 145 psi; 0.24 gpm at 290 psi; 0.27 gpm at 435 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpacing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard nozzles 3 ft along the line and 6 ft between lines; Blue\/White in the humidity and cooling role 6 ft apart with no overlap needed; High Pressure 10 ft apart with the line as high as the bay allows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard nozzles topside, bottom side or on 1\/2 in PVC risers, with No-Drip check valves required for bottom side; High Pressure topside only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard nozzles take a Dramm Assembly Insert; the High Pressure nozzle cannot use one and the pipeline must be drilled and tapped directly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThe High Pressure nozzle requires high pressure pumps and filtration equipment; the standard three do not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReduced pattern, standard nozzles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFor a 5 ft diameter, lower the pipeline to 3 ft, space nozzles at 2 1\/2 ft and pipelines 5 ft apart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8 Whitworth, shared with Dramm's Pin-Perfect and Nifty nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndividually or in 250 count bags\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eConfigurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel and Orifice\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMisty Mist Blue\/White - 1.00 mm - 0.17 gpm at 36 psi\u003c\/td\u003e\n\u003ctd\u003eMM-BW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMisty Mist Red\/White - 1.25 mm - 0.27 gpm at 36 psi\u003c\/td\u003e\n\u003ctd\u003eMM-RW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMisty Mist Black\/White - 1.50 mm - 0.39 gpm at 36 psi\u003c\/td\u003e\n\u003ctd\u003eMM-KW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Pressure Grey\/White - 0.75 mm - 0.12 gpm at 73 psi\u003c\/td\u003e\n\u003ctd\u003eHP-GW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree standard orifices from 1.00 to 1.50 mm covering propagation mist, plug irrigation and humidity\u003c\/li\u003e\n\u003cli\u003eBlue\/White is Dramm's own pick for raising humidity and mist cooling, run on short automated cycles\u003c\/li\u003e\n\u003cli\u003eStandard nozzles hang under the pipe with No-Drip check valves as well as mounting on top\u003c\/li\u003e\n\u003cli\u003eThe High Pressure Grey\/White is a separate 0.75 mm nozzle for 73 to 435 psi and a 10 ft ultra fine pattern\u003c\/li\u003e\n\u003cli\u003eFlow is published at two or four pressures per nozzle, so a line can actually be sized rather than guessed\u003c\/li\u003e\n\u003cli\u003eSame 3\/8 Whitworth thread as the rest of Dramm's overhead range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOverhead mist propagation\u003c\/li\u003e\n\u003cli\u003ePlug and liner irrigation\u003c\/li\u003e\n\u003cli\u003eRaising greenhouse humidity\u003c\/li\u003e\n\u003cli\u003eMist cooling on standard pressure lines with Blue\/White\u003c\/li\u003e\n\u003cli\u003eHigh pressure fog cooling with the Grey\/White nozzle and a suitable pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eThe standard nozzles install with Dramm's Assembly Insert, No-Drip riser and No-Drip extension check valve; the High Pressure version needs the drill tap instead, and Dramm names its run-out valves for drip control on those lines.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dramm","offers":[{"title":"Misty Mist Blue\/White - 1.00 mm - 0.17 gpm at 36 psi","offer_id":52800104628535,"sku":"MM-BW","price":2.24,"currency_code":"USD","in_stock":true},{"title":"Misty Mist Red\/White - 1.25 mm - 0.27 gpm at 36 psi","offer_id":52800104661303,"sku":"MM-RW","price":2.24,"currency_code":"USD","in_stock":true},{"title":"Misty Mist Black\/White - 1.50 mm - 0.39 gpm at 36 psi","offer_id":52800104694071,"sku":"MM-KW","price":2.24,"currency_code":"USD","in_stock":true},{"title":"High Pressure Grey\/White - 0.75 mm - 0.12 gpm at 73 psi","offer_id":52800104726839,"sku":"HP-GW","price":3.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/MM.jpg?v=1786404424","url":"https:\/\/www.blacklabelsupply.io\/products\/dramm-360-degree-misty-mist-nozzle","provider":"BLACK LABEL","version":"1.0","type":"link"}