{"product_id":"dab-o-ring-kit-esybox-max-sp00006718","title":"Dab Pumps - O-Ring Kit for EsyBox Max - SP00006718","description":"\u003ch2\u003eO-Ring Kit - EsyBox Max - SP00006718\u003c\/h2\u003e\u003cp\u003eThe O-ring kit is the set of elastomer seals DAB calls out for the EsyBox Max hydraulic assembly. DAB's spare parts sheet lists it as \u003cstrong\u003e(SP) ESYBOXMAX - O-RING KIT\u003c\/strong\u003e at position 135, and the exploded drawing references position 135 at several separate points across the assembly rather than at a single location.\u003c\/p\u003e\u003cp\u003eDAB's maintenance instructions treat these seals as consumables of the service job rather than as scheduled-replacement items. Manual section 13.3 states that should one or more O-rings be lost or damaged during maintenance on the non-return valve, they must be replaced, otherwise the system might not work correctly. Section 13.4 tells you to screw the eyebolt back into place making sure that the O-ring has not been removed or damaged during the operation. Section 13.5, step 9, tells you to check the O-ring on the expansion tank and replace it if damaged, unless it is already supplied mounted on the DAB spare part, in which case it can be scrapped together with the vessel being replaced. On the spare parts drawing, position 135 items also appear at the pressure sensor and the self-priming shutter.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox Max. DAB's spare parts sheet \u003cstrong\u003eESYBOX MAX 45\/120 M208-240 PUMP\/AUS2, revision N.1, document code 60217359\u003c\/strong\u003e lists this item at \u003cstrong\u003eposition 135\u003c\/strong\u003e as \u003cstrong\u003e(SP) ESYBOXMAX - O-RING KIT\u003c\/strong\u003e, item no. SP00006718.\u003c\/li\u003e\n\u003cli\u003eThe DAB EsyBox Max instruction manual for North America covers the \u003cstrong\u003eEsyBox Max 60\/120 M, 60\/120 T and 85\/120 T\u003c\/strong\u003e (manual section 1.5). That manual does not list the 45\/120 M208-240 at all, and the spare parts sheet cited here is for the 45\/120 M208-240. The two documents cover different model sets.\u003c\/li\u003e\n\u003cli\u003eThe manual sections that call for O-ring replacement (13.3 non-return valve, 13.4 motor shaft, 13.5 expansion vessel) are written for the EsyBox Max product without distinguishing between the models the manual covers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eAttention: check the correspondence with the revision of your product.\u003c\/em\u003e That caution is printed across the header of DAB's spare parts sheet. Check the position number and item number against the sheet issued for your own unit and its revision before you order.\u003c\/li\u003e\n\u003cli\u003eThe only EsyBox Max spare parts list available for this listing is the AU build sheet, \u003cstrong\u003eESYBOX MAX 45\/120 M208-240 PUMP\/AUS2, revision N.1, document code 60217359\u003c\/strong\u003e. DAB has not published a parts sheet in the documents used here for the 60\/120 T or 85\/120 T, so the item number for three-phase machines is not confirmed by these sources.\u003c\/li\u003e\n\u003cli\u003eDAB does not publish a contents list, sizes or materials for this kit at part level, and none are stated here. If you need to match one specific seal, work from the spare parts sheet issued for your unit.\u003c\/li\u003e\n\u003cli\u003eDAB's manual states the system requires no routine maintenance operations (section 13), so there is no published service interval that calls for this kit. It is ordered against a specific job or a damaged seal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOften Replaced With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNRV Group\u003c\/strong\u003e, SP00006704, position 121. Manual section 13.3 requires damaged or lost O-rings to be replaced whenever the non-return valve is serviced.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Tank 2 L\u003c\/strong\u003e, SP00006706, position 123. Manual section 13.5, step 9, covers the O-ring check during expansion vessel replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyebolt 3\/4 in\u003c\/strong\u003e, SP00006698, position 115. Manual section 13.4 warns about the eyebolt O-ring when the motor shaft is freed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946661245239,"sku":"DABSP00006718","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-o-ring-kit-esybox-max-sp00006718-1.jpg?v=1788499528","url":"https:\/\/www.blacklabelsupply.io\/products\/dab-o-ring-kit-esybox-max-sp00006718","provider":"BLACK LABEL","version":"1.0","type":"link"}