{"product_id":"dab-flowmeter-kit-esybox-mini-3-sp00002195","title":"Dab Pumps - Flowmeter Kit for EsyBox Mini 3 - SP00002195","description":"\u003ch2\u003eKit Flowmeter - EsyBox Mini 3 - SP00002195\u003c\/h2\u003e\u003cp\u003eDAB lists this part as KIT FLOWMETER. The DAB instruction manual explains that the integrated inverter control makes use of flow, pressure and temperature sensors that are also integrated in the system, and that by means of these sensors the system switches on and off automatically according to demand. Flow is what the pump reads to decide it can stop: the manual gives a VF flow display page and an output flow meter page showing a total delivered flow and a resettable partial count, and it notes that when the measurement is below the sensitivity threshold of the flow sensor the value flashes next to the VF identification.\u003c\/p\u003e\u003cp\u003ePosition 19 on all four DAB lists. The exploded view shows an impeller in its housing with a retaining clip, fixings and a sensor lead, fitted into the hydraulic circuit directly beneath the pressure sensor at position 20 and next to the outlet body group at position 22.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox Mini 3, all four published revisions: N.1 (product code 60179457), N.4 (60183501), N.5 (60183501) and N.6 (60212598). DAB lists this part at position 19 on every one of them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable across all four revisions.\u003c\/strong\u003e DAB uses the same item number, SP00002195, at position 19 on N.1, N.4, N.5 and N.6, so you do not need to know which revision you own before you order this part.\u003c\/li\u003e\n\u003cli\u003eThe four DAB lists behind this listing are a Schuko build, product code 60179457, and Australian builds, product codes 60183501 and 60212598. DAB publishes no US list in this document series, so US buyers should check the item number against the technical data plate on their own pump before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB prints this caution at the head of every EsyBox Mini 3 spare parts list: \u003cem\u003e\"Attention: check the correspondence with the revision of your product.\"\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eDAB troubleshooting names a faulty flow sensor as one of the causes of a pump that does not stop, alongside a leak in the system, a clogged impeller or hydraulic part, and air getting into the suction pipe. DAB advises checking those first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow to check your own pump.\u003c\/strong\u003e DAB keeps the technical data plate inside the technical compartment. Open the door on Face A, which is the top face of the pump in the vertical installation, and read the plate: DAB shows it as item 2 in Figure 3 of the EsyBox Mini 3 instruction manual, alongside the quick guide, the filling cap, the accessory tool, the motor shaft and the QR code. If you cannot make out a revision, photograph the whole plate and send it with your order.\u003c\/li\u003e\n\u003cli\u003eDAB instruction manual, maintenance section: disconnect the power supply before starting any work on the system.\u003c\/li\u003e\n\u003cli\u003eFor context, four positions on this pump do change between revisions: the HMI at position 8, the power cable at position 10, the main board at position 12 and the complete motor at position 18. DAB also adds a bug filter to the list from N.4 onward. This part is not one of them.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946662883639,"sku":"DABSP00002195","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-flowmeter-kit-esybox-mini-3-sp00002195-1.jpg?v=1788499578","url":"https:\/\/www.blacklabelsupply.io\/products\/dab-flowmeter-kit-esybox-mini-3-sp00002195","provider":"BLACK LABEL","version":"1.0","type":"link"}