{"title":"Dab Pumps","description":null,"products":[{"product_id":"dab-pumps-esydock-max-docking-station","title":"Dab Pumps - EsyDock Max Docking Station - Midwest Warehouses","description":"\u003ch2\u003eDAB EsyDock Max Docking Station\u003c\/h2\u003e\u003cp\u003eEsyDock Max is the mounting base that ties an EsyBox Max pump unit into the piping system. It carries every fitting needed for the system connection and sits on anti-vibration feet, so the assembled set stays as quiet as the pump on its own. Four hydraulic configuration modes let the suction and discharge leave opposite sides of the dock or the same side, so the dock adapts to the pipe run instead of the other way around.\u003c\/p\u003e\u003cp\u003ePipe the dock in first and add pumps later, swap a pump without cutting pipe, or lift a unit off for winter storage. The two-pump and three-pump bases build a multi-pump booster on site out of separate, easier-to-carry boxes, which matters when the pump room is up a narrow stair. Once the dock is in, the pumps click into place and the set is commissioned from the DAB app.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEsyBox Max pump units, single-phase and three-phase, in the 45\/120, 60\/120 and 85\/120 sizes\u003c\/li\u003e\n\u003cli\u003e1 EsyDock Max carries one pump, 2 EsyDock Max carries two, 3 EsyDock Max carries three\u003c\/li\u003e\n\u003cli\u003eNot a base for EsyBox, EsyBox Mini 3 or EsyBox Diver, which use the ESYDOCK and ESYTWIN family\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 EsyDock Max NPT (60199045): single-pump base, suction and discharge 2 in NPT\u003c\/li\u003e\n\u003cli\u003e2 EsyDock Max NPT (60199055): two-pump base, suction and discharge 2 in NPT\u003c\/li\u003e\n\u003cli\u003e3 EsyDock Max NPT (60199056): three-pump base, suction and discharge 2 in NPT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuction and discharge, all EsyDock Max configurations: 2 in NPT\u003c\/li\u003e\n\u003cli\u003eMaximum pump connection pressure: 174 psi\u003c\/li\u003e\n\u003cli\u003eDimensions, 1 EsyDock Max: A 14-3\/4 in, B 15-3\/16 in, H 3-7\/16 in, H1 4-7\/8 in, H2 9 in\u003c\/li\u003e\n\u003cli\u003eDimensions, 2 EsyDock Max: A 31-15\/16 in, B 15-3\/16 in, H 3-7\/16 in, H1 4-7\/8 in, H2 9 in\u003c\/li\u003e\n\u003cli\u003eDimensions, 3 EsyDock Max: A 49-3\/16 in, B 15-3\/16 in, H 3-7\/16 in, H1 4-7\/8 in, H2 9 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour hydraulic configurations for flexible suction and discharge routing\u003c\/li\u003e\n\u003cli\u003eAnti-vibration feet keep the completed set quiet\u003c\/li\u003e\n\u003cli\u003ePumps disconnect quickly for service, reducing system downtime\u003c\/li\u003e\n\u003cli\u003eOn-site assembly of two-pump and three-pump boosters from separate components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"1 EsyDock Max - Single Pump","offer_id":52945979441463,"sku":"60199045","price":834.0,"currency_code":"USD","in_stock":true},{"title":"2 EsyDock Max - Two Pump","offer_id":52945979474231,"sku":"60199055","price":1459.0,"currency_code":"USD","in_stock":true},{"title":"3 EsyDock Max - Three Pump","offer_id":52945979506999,"sku":"60199056","price":1876.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esydock-max-docking-station-1_0a84a154-8309-458e-a8b1-6b671b3eda96.jpg?v=1788491248"},{"product_id":"dab-pumps-esybox-docking-station","title":"Dab Pumps - EsyBox Docking Station - Midwest Warehouses","description":"\u003ch2\u003eDAB EsyBox Docking Station\u003c\/h2\u003e\u003cp\u003eThe ESYDOCK family is the quick-connect base for the EsyBox line. Each dock arrives complete with the fittings needed to tie into the system and rides on anti-vibration feet, so the finished set is as quiet as the pump itself. Four plumbing configurations mean the suction and the discharge can leave the dock on opposite sides or on the same side, which makes the pipe run simpler and the install faster.\u003c\/p\u003e\u003cp\u003eFit the dock into the pipework now and hang the pump on it later, pull a pump for service or winter storage without touching a pipe joint, or use the twin docks to stand two pumps side by side for higher flow or a standby unit. ESYTWIN is the evolution of ESYDOCK for two-pump groups and, per DAB, takes about half the space of an equivalent traditional two-pump set. EsyTwin Mini does the same job for two EsyBox Mini 3 units.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESYDOCK NPT (60150514): one EsyBox\u003c\/li\u003e\n\u003cli\u003eESYTWIN DOCK NPT (60162081): two EsyBox units side by side\u003c\/li\u003e\n\u003cli\u003eEsyTwin Mini NPT (60218780): two EsyBox Mini 3 units side by side\u003c\/li\u003e\n\u003cli\u003eEsyBox units communicate wirelessly with each other for setup and duty rotation, so a twin dock builds a working duty and standby pair\u003c\/li\u003e\n\u003cli\u003eNot for EsyBox Max, which uses the EsyDock Max range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESYDOCK NPT (60150514): single-pump base for EsyBox, 1-1\/4 in NPT suction and discharge, NSF\/ANSI 61\u003c\/li\u003e\n\u003cli\u003eESYTWIN DOCK NPT (60162081): two-pump base for EsyBox, 1-1\/4 in NPT suction and discharge, NSF\/ANSI 61\u003c\/li\u003e\n\u003cli\u003eEsyTwin Mini NPT (60218780): two-pump base for EsyBox Mini 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESYDOCK suction and discharge: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003eESYDOCK dimensions: A 14-11\/16 in, B 12-9\/16 in, C 11-9\/16 in, H 2-5\/16 in, H1 3-9\/16 in\u003c\/li\u003e\n\u003cli\u003eESYDOCK weight: 8.8 lbs\u003c\/li\u003e\n\u003cli\u003eESYTWIN DOCK suction and discharge: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003eESYTWIN DOCK dimensions: 9.1 x 29.5 x 13.8 in\u003c\/li\u003e\n\u003cli\u003eEsyTwin Mini dimensions: A 29.57 in (751 mm), B 10.55 in (268 mm), C 28.71 in (729 mm), H 3.98 in (101 mm), H1 8.97 in (228 mm)\u003c\/li\u003e\n\u003cli\u003eEsyTwin Mini weight: 17.09 lbs (7.75 kg)\u003c\/li\u003e\n\u003cli\u003eCertification: ESYDOCK and ESYTWIN listed by DAB as NSF\/ANSI 61 drinking water\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour plumbing configurations for fast, flexible installation\u003c\/li\u003e\n\u003cli\u003eComplete with the fittings required to connect to the system\u003c\/li\u003e\n\u003cli\u003eAnti-vibration feet preserve the low noise of the EsyBox\u003c\/li\u003e\n\u003cli\u003ePipe the system first and add the pump later, or remove the pump for maintenance in minutes\u003c\/li\u003e\n\u003cli\u003eTwin docks build two-pump sets in roughly half the footprint of a traditional equivalent\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"ESYDOCK NPT - 1 EsyBox","offer_id":52945979703607,"sku":"60150514","price":589.0,"currency_code":"USD","in_stock":true},{"title":"ESYTWIN DOCK NPT - 2 EsyBox","offer_id":52945979736375,"sku":"60162081","price":1153.0,"currency_code":"USD","in_stock":true},{"title":"EsyTwin Mini NPT - 2 EsyBox Mini 3","offer_id":52945979769143,"sku":"60218780","price":934.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esybox-docking-station-1.jpg?v=1788482453"},{"product_id":"dab-pumps-esywall-wall-mount-bracket-kit","title":"Dab Pumps - ESYWALL Wall Mount Bracket Kit - Midwest Warehouses","description":"\u003ch2\u003eDAB ESYWALL Wall Mount Bracket Kit\u003c\/h2\u003e\u003cp\u003eESYWALL is the complete kit for hanging an EsyBox or EsyBox Mini 3 on a wall instead of standing it on the floor. It ships with the brackets, screws and dowels needed for the job plus two anti-vibration spacers that absorb pump vibration at the mounting points, so the wall does not become a sounding board.\u003c\/p\u003e\u003cp\u003eWall mounting is one of the standard EsyBox installation positions alongside horizontal and vertical floor mounting. It frees the floor in a tight utility room or plant closet and, with the pump upright on the bracket, keeps both inlet connections usable.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox\u003c\/li\u003e\n\u003cli\u003eDAB EsyBox Mini 3\u003c\/li\u003e\n\u003cli\u003eAllows two inlets to be used with the EsyBox or EsyBox Mini 3 upright\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eItem code: 60161442\u003c\/li\u003e\n\u003cli\u003eDimensions: A 7-1\/4 in, H 5-5\/8 in\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 lbs\u003c\/li\u003e\n\u003cli\u003eKit contents: brackets, screws, dowels and two anti-vibration spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete wall mounting kit, nothing else to source\u003c\/li\u003e\n\u003cli\u003eTwo spacers absorb vibration between pump and wall\u003c\/li\u003e\n\u003cli\u003eFits both the full-size EsyBox and the EsyBox Mini 3\u003c\/li\u003e\n\u003cli\u003eKeeps both inlets available with the pump mounted upright\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52945979834679,"sku":"60161442","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esywall-wall-mount-bracket-kit-1.jpg?v=1788482455"},{"product_id":"dab-pumps-esycover-outdoor-cover","title":"Dab Pumps - ESYCOVER Outdoor Cover - Midwest Warehouses","description":"\u003ch2\u003eDAB ESYCOVER Outdoor Cover\u003c\/h2\u003e\u003cp\u003eESYCOVER is DAB's outdoor kit for the EsyBox line. It fits over the pump and shields it from rain so the booster can live outside the mechanical room, for example under a balcony, a porch roof or a similar partially exposed spot. DAB specifies it for vertical installation only.\u003c\/p\u003e\u003cp\u003eIt matters because the EsyBox motor is rated IPX4 with no cover fitted, which handles splashing but is not an invitation to leave the pump in the weather. ESYCOVER is the accessory DAB publishes for that partially external location, and there is a version sized for the full EsyBox and one sized for the EsyBox Mini 3.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESYCOVER (60203667): DAB EsyBox\u003c\/li\u003e\n\u003cli\u003eESYCOVER Mini (60203671): DAB EsyBox Mini 3\u003c\/li\u003e\n\u003cli\u003eVertical pump installation only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESYCOVER (60203667): outdoor kit sized for the EsyBox\u003c\/li\u003e\n\u003cli\u003eESYCOVER Mini (60203671): outdoor kit sized for the EsyBox Mini 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFunction: outdoor installation kit, protects the pump from rain\u003c\/li\u003e\n\u003cli\u003eInstallation orientation: vertical only\u003c\/li\u003e\n\u003cli\u003eItem codes: 60203667 for EsyBox, 60203671 for EsyBox Mini 3\u003c\/li\u003e\n\u003cli\u003eReference: DAB lists EsyBox motor protection as IPX4 without ESYCOVER fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtends EsyBox installation to partially external locations\u003c\/li\u003e\n\u003cli\u003eTwo sizes, one for EsyBox and one for EsyBox Mini 3\u003c\/li\u003e\n\u003cli\u003ePurpose-built DAB accessory rather than a generic pump cover\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"ESYCOVER - for EsyBox","offer_id":52945979900215,"sku":"60203667","price":160.0,"currency_code":"USD","in_stock":true},{"title":"ESYCOVER Mini - for EsyBox Mini 3","offer_id":52945979932983,"sku":"60203671","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esycover-outdoor-cover-1_29699c9a-0d73-4161-975e-74a8b3ab8ddd.jpg?v=1788491242"},{"product_id":"dab-pumps-esylink-kit","title":"Dab Pumps - ESYLINK I\/O Expansion Kit for EsyBox Pumps - Midwest Warehouses","description":"\u003ch2\u003eDAB ESYLINK Kit\u003c\/h2\u003e\u003cp\u003eESYLINK is the DAB wireless interface accessory that gives an E.SYBOX the wired I\/O a plain booster does not have. It talks to the pump over an 802.15.4 wireless link and provides four optoisolated digital inputs, two normally open volt-free relay outputs and a connection for an auxiliary pressure sensor that the pump can use as its set point reference.\u003c\/p\u003e\u003cp\u003eUse the inputs for an external float switch, an auxiliary set point, a remote system disable and fault reset, or low pressure detection. Use the outputs to signal an active alarm and motor running status to a panel, an annunciator or a building system. ESYLINK can also push a software update to an E.SYBOX, E.SYBOX MINI or E.SWIM.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.SYBOX\u003c\/li\u003e\n\u003cli\u003eSoftware updating of E.SYBOX, E.SYBOX MINI and E.SWIM\u003c\/li\u003e\n\u003cli\u003eConnects to the pump over DAB 802.15.4 wireless, no signal wiring to the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWireless interface: IEEE 802.15.4\u003c\/li\u003e\n\u003cli\u003eDigital inputs: 4 optoisolated\u003c\/li\u003e\n\u003cli\u003eInput functions: external float switch, auxiliary set point, system disable and fault reset, low pressure detection\u003c\/li\u003e\n\u003cli\u003eRelay outputs: 2 normally open, volt-free\u003c\/li\u003e\n\u003cli\u003eOutput functions: active alarm, motor running status\u003c\/li\u003e\n\u003cli\u003ePressure sensor: 1 remote auxiliary pressure sensor input\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 24 V plus or minus 20 percent\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 55 mA minimum at 24 V, 150 mA maximum at 24 V\u003c\/li\u003e\n\u003cli\u003eModule dimensions: 105 x 94 x 60 mm, 6 DIN modules\u003c\/li\u003e\n\u003cli\u003eModule weight: 200 g (0.44 lb)\u003c\/li\u003e\n\u003cli\u003eProtection class: IP 20\u003c\/li\u003e\n\u003cli\u003eWorking temperature: 0 to 50 C (32 F to 122 F)\u003c\/li\u003e\n\u003cli\u003eKit contents: ESYLINK module, 8 DIN electrical box, power transformer with 115-230 V 50\/60 Hz input and 24 V output, 3 cable glands\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds hard-wired inputs and outputs to a wireless EsyBox system\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete kit with enclosure, transformer and glands\u003c\/li\u003e\n\u003cli\u003eOptoisolated inputs accept DC or 50-60 Hz AC signals\u003c\/li\u003e\n\u003cli\u003eAuxiliary pressure sensor input for remote set point reference\u003c\/li\u003e\n\u003cli\u003eDoubles as the software update path for E.SYBOX, E.SYBOX MINI and E.SWIM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52945980031287,"sku":"60164735","price":858.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esylink-kit-1.jpg?v=1788482459"},{"product_id":"dab-pumps-esy-io-expansion-module","title":"Dab Pumps - ESY I\/O Expansion Module - Midwest Warehouses","description":"\u003ch2\u003eDAB ESY I\/O Expansion Module\u003c\/h2\u003e\u003cp\u003eESY I\/O is the electronic expansion module that lets an EsyBox line pump talk to the rest of the plant. It adds four optoisolated digital inputs for devices such as float switches and pressure switches, four normally open relay outputs for remote alarms and auxiliary equipment, an input for a remote pressure sensor that compensates for pipe losses, and an RS485 Modbus RTU gateway for a building management system.\u003c\/p\u003e\u003cp\u003eThe module is wall mounted in an IP 55 enclosure with cable glands, runs on ordinary 100-240 VAC single-phase power, and links to the pump over DAB proprietary 802.15.4 wireless. Configuration and firmware updates are done through the DAB app rather than dip switches, and the pump itself decides how the interfaces are used.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESY I\/O US (60206085): DAB EsyBox Max\u003c\/li\u003e\n\u003cli\u003eESY I\/O EsyBox NA V2 (60219995): DAB EsyBox\u003c\/li\u003e\n\u003cli\u003eConnects to BMS equipment with an RS485 Modbus RTU interface\u003c\/li\u003e\n\u003cli\u003eAccepts clean contact inputs such as floats and pressure switches, and drives outputs such as sirens and remote alarms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESY I\/O US (60206085): the EsyBox Max version of the module\u003c\/li\u003e\n\u003cli\u003eESY I\/O EsyBox NA V2 (60219995): the second-generation module for the EsyBox, configured through the DAB H2D app\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupply voltage: 100-240 VAC\u003c\/li\u003e\n\u003cli\u003eSupply frequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eMaximum rated current: 125 mA\u003c\/li\u003e\n\u003cli\u003eOptoisolated digital inputs: 4\u003c\/li\u003e\n\u003cli\u003eRelay outputs: 4 normally open, maximum 5 A at 230 VAC\u003c\/li\u003e\n\u003cli\u003eSerial interface: 1 RS485 Modbus RTU\u003c\/li\u003e\n\u003cli\u003eRemote pressure sensor: 1 input\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP 55\u003c\/li\u003e\n\u003cli\u003eAmbient working temperature: 0 to 50 C (32 F to 122 F)\u003c\/li\u003e\n\u003cli\u003eRadio: DAB proprietary wireless IEEE 802.15.4, Wi-Fi 802.11 b\/g\/n 2.4 GHz, Bluetooth V4.2 BR\/EDR and Bluetooth LE\u003c\/li\u003e\n\u003cli\u003eMinimum supply conductor: 0.8 sq mm copper, AWG 18\u003c\/li\u003e\n\u003cli\u003eMounting: wall mounted, front panel removes for wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrings float switches, pressure switches and remote alarms into an all-electronic booster\u003c\/li\u003e\n\u003cli\u003eModbus RTU gateway puts the pump on a building management system\u003c\/li\u003e\n\u003cli\u003eRemote pressure sensor input compensates for pressure losses in long runs\u003c\/li\u003e\n\u003cli\u003eIP 55 wall-mount enclosure with glanded cable entries\u003c\/li\u003e\n\u003cli\u003eStatus LEDs for power, fault, pressure sensor, Modbus, each input and each output\u003c\/li\u003e\n\u003cli\u003eConfigured and updated from the DAB app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"ESY I\/O US - for EsyBox Max","offer_id":52945980064055,"sku":"60206085","price":1397.0,"currency_code":"USD","in_stock":true},{"title":"ESY I\/O EsyBox NA V2 - for EsyBox","offer_id":52945980096823,"sku":"60219995","price":1133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esy-io-expansion-module-1_1b8c428a-c1d7-412c-a3c8-ed473aea0920.jpg?v=1788491207"},{"product_id":"dab-pumps-dconnect-box-2","title":"Dab Pumps - DConnect Box2 Wi-Fi Pump Monitoring Gateway - Midwest Warehouses","description":"\u003ch2\u003eDAB DConnect Box2\u003c\/h2\u003e\u003cp\u003eDConnect Box2 is the compact gateway that puts a DAB pump installation on the DConnect cloud service. It joins the site Wi-Fi and then links to the pumps, using powerline communication over the existing power cable for submersible units so no extra signal wiring is pulled. From the DConnect app or the web dashboard you can set start and stop parameters, read alarm detail, follow operating charts and see system status from anywhere.\u003c\/p\u003e\u003cp\u003eThis version ships with the NEMA 6 plug for a 230 V NEMA 6\/15P receptacle. It handles up to four DAB products at once and adds one voltage-controlled input, one relay output and a Modbus RS485 port, so it can also pass a signal in or out of the installation while it is reporting to the cloud.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox line products and DTron 3\u003c\/li\u003e\n\u003cli\u003eSupplied with the EsyBox Diver, so this item is the add-on or replacement unit for other installations\u003c\/li\u003e\n\u003cli\u003eManages up to 4 DAB products at the same time, depending on pump type\u003c\/li\u003e\n\u003cli\u003eRequires a permanent 2.4 GHz Wi-Fi internet connection with active DHCP and no login portal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eItem code: 60198037, NEMA 6 plug for 230 V NEMA 6\/15P\u003c\/li\u003e\n\u003cli\u003ePower supply: 100-240 VAC, 50\/60 Hz, integrated power supply unit\u003c\/li\u003e\n\u003cli\u003eProtection class: IP 20\u003c\/li\u003e\n\u003cli\u003eInternet connection: Wi-Fi 802.11 b\/g\/n, WPA-PSK and WPA2-PSK, 2.4 GHz\u003c\/li\u003e\n\u003cli\u003ePump communication: DAB wireless and powerline communication\u003c\/li\u003e\n\u003cli\u003eMaximum devices: 4 pumps, depending on pump type\u003c\/li\u003e\n\u003cli\u003eExternal I\/O: 1 non opto-coupled input with voltage control, 1 relay output rated 24 V 5 A resistive\u003c\/li\u003e\n\u003cli\u003ePorts: power plug, USB for EBOX and accessories, input and output port, Modbus RS485 port\u003c\/li\u003e\n\u003cli\u003eAssembly: wall mounted using the fixing holes\u003c\/li\u003e\n\u003cli\u003eDimensions: 135 x 135 x 139.6 mm (5.3 x 5.3 x 5.5 in)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.3 kg (2.9 lbs)\u003c\/li\u003e\n\u003cli\u003eStatus LEDs: PLC, wireless, Wi-Fi, DAB DConnect cloud connection\u003c\/li\u003e\n\u003cli\u003ePack contents: DConnect Box2, power cable, electrical connectors for Modbus and I\/O, quick guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemote monitoring and control of a DAB installation from a phone, tablet or browser\u003c\/li\u003e\n\u003cli\u003ePowerline communication reaches submersible pumps over the power cable alone\u003c\/li\u003e\n\u003cli\u003ePush notification of faults before they become a service call\u003c\/li\u003e\n\u003cli\u003eModbus RS485 port for integration with existing site equipment\u003c\/li\u003e\n\u003cli\u003eWall mounted, integrated power supply, no external adapter to lose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52945980129591,"sku":"60198037","price":543.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-dconnect-box-2-1_b5a46d18-d17c-4c3c-b917-41d39297998e.jpg?v=1788491182"},{"product_id":"dab-pumps-nfc-sensor","title":"Dab Pumps - NFC Float and NFC Level Sensor for DAB Pumps - Midwest Warehouses","description":"\u003ch2\u003eDAB NFC Sensor\u003c\/h2\u003e\u003cp\u003eDAB's NFC accessories connect to the pump through a Near Field Communication pocket on the pump body. That means no extra wiring and no opening the pump: the sensor is fitted from outside, the watertight seal is never broken, and the pump reads the sensor as soon as it is in place. Two sensors are offered, a float switch and a water level measurement probe.\u003c\/p\u003e\u003cp\u003eThe NFC Float watches the level in a tank or cistern and stops the pump before the tank empties, protecting it against dry running and seizure. The NFC Level Sensor works with a DConnect Box2 to report the actual level in the tank to the DConnect app, so the tank is monitored rather than just protected.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNFC Float (60184577): DAB DTron 2, DTron 3 and EsyBox Diver\u003c\/li\u003e\n\u003cli\u003eNFC Water Level Measurement (60184570): DAB DTron 3 and EsyBox Diver\u003c\/li\u003e\n\u003cli\u003eNFC Water Level Measurement requires a DAB DConnect Box2 to report level\u003c\/li\u003e\n\u003cli\u003eFits the pump's NFC pocket without opening the pump body\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNFC Water Level Measurement (60184570): reports tank level to the DConnect app through a DConnect Box2\u003c\/li\u003e\n\u003cli\u003eNFC Float (60184577): stops the pump on low level to prevent dry running\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnection method: NFC pocket on the pump, no additional wiring\u003c\/li\u003e\n\u003cli\u003eNFC Water Level Measurement function: monitors tank level and notifies the user through the app\u003c\/li\u003e\n\u003cli\u003eNFC Float function: detects low water level, prevents tank emptying and pump dry running\u003c\/li\u003e\n\u003cli\u003eItem codes: 60184570 water level measurement, 60184577 float switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstalls without disassembling the pump or breaking its watertight seal\u003c\/li\u003e\n\u003cli\u003eNo control wiring to run back to the pump\u003c\/li\u003e\n\u003cli\u003eDry-run protection that acts on real tank level, not just on pump behaviour\u003c\/li\u003e\n\u003cli\u003eLevel reporting to the DConnect app when paired with a DConnect Box2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"NFC Level Sensor","offer_id":52945980227895,"sku":"60184570","price":183.0,"currency_code":"USD","in_stock":true},{"title":"NFC Float","offer_id":52945980260663,"sku":"60184577","price":183.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab_logo_placeholder.jpg?v=1788483068"},{"product_id":"dab-pumps-doc-68-surface-installation-base","title":"Dab Pumps - DOC68 Surface Installation Base - Midwest Warehouses","description":"\u003ch2\u003eDAB DOC68 Surface Installation Base\u003c\/h2\u003e\u003cp\u003eDOC68 is the accessory that takes a DAB submersible out of the tank. Fitted to a DTron or an EsyBox Diver, it lets the pump stand and run above ground in a vertical position while keeping the pump's IP 68 rating, so the same unit that would normally sit in a cistern can be installed outdoors as a surface pump.\u003c\/p\u003e\u003cp\u003eThat flexibility is the point of the range: one pump model covers submerged, semi-submerged and surface installation, and the choice can be made at the job rather than at the order. It suits rainwater re-use, tank pressurization, garden and irrigation work where the tank is not a practical place to put the pump.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox Diver\u003c\/li\u003e\n\u003cli\u003eDAB DTron 2 and DTron 3\u003c\/li\u003e\n\u003cli\u003eVertical surface installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eItem code: 60192276\u003c\/li\u003e\n\u003cli\u003eFunction: permits installation of a DTron or EsyBox Diver outdoors as an IP 68 certified surface pump\u003c\/li\u003e\n\u003cli\u003eInstallation orientation: vertical\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConverts a DAB submersible into an above-ground surface pump\u003c\/li\u003e\n\u003cli\u003eKeeps the pump's IP 68 protection in an outdoor location\u003c\/li\u003e\n\u003cli\u003eOne pump model then covers submerged, semi-submerged and surface installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52945980293431,"sku":"60192276","price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-doc-68-surface-installation-base-1.jpg?v=1788491188"},{"product_id":"dab-pumps-pipe-union-kit","title":"Dab Pumps - Pipe Union Kit 1 in NPT - Midwest Warehouses","description":"\u003ch2\u003eDAB Pipe Union Kit 1 in NPT\u003c\/h2\u003e\u003cp\u003eA three-piece 1 in NPT stainless steel union kit with an O-ring seal, published by DAB as a male and female union set for connecting an EsyBox or EsyBox Mini 3 to the system pipework. The O-ring seal means the joint pulls up on the sealing face rather than on thread compound, and the union splits so the pump can be taken off the line without cutting or rethreading pipe.\u003c\/p\u003e\u003cp\u003eThis is the connection kit reached for when a pump is being installed or replaced on existing pipe, or when a service technician wants a clean break point at the pump. DAB lists it in the EsyBox and EsyBox Mini 3 accessory ranges in its US literature under two item codes, 60220601 and 60203142, with the same published description; either one is the same 1 in NPT three-piece union, so order whichever your distributor stocks.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox\u003c\/li\u003e\n\u003cli\u003eDAB EsyBox Mini 3\u003c\/li\u003e\n\u003cli\u003e1 in NPT threaded connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e60220601: listed by DAB as Kit Pipe Union 3PCS MF 1 in with O-ring, NPT, in the current US catalog\u003c\/li\u003e\n\u003cli\u003e60203142: listed by DAB as 1 in stainless steel union, Kit Pipe Union 3PCS MF 1 in with O-ring, NPT, for EsyBox and EsyBox Mini\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKit contents: 3 pieces, male and female union set\u003c\/li\u003e\n\u003cli\u003eThread size: 1 in NPT\u003c\/li\u003e\n\u003cli\u003eSeal: O-ring\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, as published by DAB\u003c\/li\u003e\n\u003cli\u003eItem codes: 60220601 and 60203142\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eO-ring sealed union rather than a thread-sealed joint\u003c\/li\u003e\n\u003cli\u003eSplits at the pump so a unit can be removed without disturbing pipework\u003c\/li\u003e\n\u003cli\u003ePublished by DAB for the EsyBox and EsyBox Mini 3 ranges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Kit Pipe Union 3PCS MF 1 in NPT (60220601)","offer_id":52945980358967,"sku":"60220601","price":114.0,"currency_code":"USD","in_stock":true},{"title":"1 in Stainless Steel Union Kit 3PCS MF NPT (60203142)","offer_id":52945980391735,"sku":"60203142","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab_logo_placeholder_6b0dfb36-3b6b-4395-96cf-add62cfad813.jpg?v=1788483072"},{"product_id":"dab-pumps-kit-maintenance-tool","title":"Dab Pumps - Kit Maintenance Tool - Midwest Warehouses","description":"\u003ch2\u003eDAB Kit Maintenance Tool\u003c\/h2\u003e\u003cp\u003eThe DAB maintenance tool kit for the EsyBox Mini 3 union kit. DAB lists it in its US range as Kit Maintenance Tool EsyBox Mini3 USA, for use with the union kit, so it is the service item kept alongside the pipe union set rather than a general-purpose tool.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox Mini 3, USA range\u003c\/li\u003e\n\u003cli\u003eUsed with the DAB 1 in NPT pipe union kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eItem code: 60209198\u003c\/li\u003e\n\u003cli\u003eDAB description: Kit Maintenance Tool EsyBox Mini3, USA, for union kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52945980457271,"sku":"60209198","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-kit-maintenance-tool-1.jpg?v=1788494459"},{"product_id":"dab-pumps-ethernet-cable-7-ft","title":"Dab Pumps - Ethernet Cable 7 ft - Midwest Warehouses","description":"\u003ch2\u003eDAB Ethernet Cable 7 ft\u003c\/h2\u003e\u003cp\u003eA 7 ft Ethernet patch cable supplied by DAB for use when a DConnect Box is connected to the network by cable instead of Wi-Fi. DAB lists it in the DConnect Box accessories section of its US range with the note 'to use in case of LAN connection'.\u003c\/p\u003e\u003cp\u003eIt suits the DConnect Box, which carries an Ethernet port compliant with the IEEE 802.3 10Base-T and 100Base-TX standards, and is the right choice where the Wi-Fi signal at the pump room is weak or where site policy requires a wired connection. Note that the DConnect Box2 reaches the internet over Wi-Fi only and has no Ethernet port.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB DConnect Box, LAN cable connection to the Ethernet port\u003c\/li\u003e\n\u003cli\u003eDConnect Box Ethernet port complies with IEEE 802.3 10Base-T and 100Base-TX\u003c\/li\u003e\n\u003cli\u003eNot applicable to the DConnect Box2, which connects to the internet by Wi-Fi only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eItem code: 60188146\u003c\/li\u003e\n\u003cli\u003eLength: 7 ft\u003c\/li\u003e\n\u003cli\u003eApplication: LAN connection for a DAB DConnect Box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52945980490039,"sku":"60188146","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab_logo_placeholder_d3dd119d-b170-4589-b22d-d656858e3caa.jpg?v=1788483077"},{"product_id":"dab-pumps-submersible-motor-cable-connector-kit","title":"Dab Pumps - Submersible Motor Cable Connector Kit - Midwest Warehouses","description":"\u003ch2\u003eDAB Submersible Motor Cable Connector Kit\u003c\/h2\u003e\u003cp\u003eThe factory motor lead kit for DAB 6 in GF submersible motors. The GF motor is built with a removable cable connector so the lead can be changed without pulling the motor apart, and this kit is the matching connector and cable assembly, supplied by DAB at 13.12 ft (4 m) in the USA version.\u003c\/p\u003e\u003cp\u003eTwo conductor sizes are offered so the lead can be matched to motor horsepower and run length. Order the kit that suits the motor being served and keep one on the truck: a damaged lead on a set 6 in motor is otherwise a much larger job.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB 6 in GF submersible motors, three-phase and single-phase\u003c\/li\u003e\n\u003cli\u003eMT4 connector type, USA version\u003c\/li\u003e\n\u003cli\u003eGF motors are supplied with a removable cable connector for fast field service\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAvailable Options\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSP00003221: 4xAWG10 conductors, 13.12 ft\u003c\/li\u003e\n\u003cli\u003eSP00003222: 4xAWG8 conductors, 13.12 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCable length: 13.12 ft (4 m)\u003c\/li\u003e\n\u003cli\u003eConductors: 4\u003c\/li\u003e\n\u003cli\u003eConductor size: AWG 10 (SP00003221) or AWG 8 (SP00003222)\u003c\/li\u003e\n\u003cli\u003eConnector: MT4\u003c\/li\u003e\n\u003cli\u003eFor: DAB 6 in GF submersible motors, NEMA 6 in flange, insulation class F, IP 68\u003c\/li\u003e\n\u003cli\u003eCertification standards listed by DAB for this item: CSA and UL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory connector kit matched to the GF motor's removable lead design\u003c\/li\u003e\n\u003cli\u003eLead can be replaced without dismantling the motor\u003c\/li\u003e\n\u003cli\u003eTwo conductor sizes to match motor rating and cable run\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"4xAWG10 - 13.12 ft","offer_id":52945980588343,"sku":"SP00003221","price":421.0,"currency_code":"USD","in_stock":true},{"title":"4xAWG8 - 13.12 ft","offer_id":52945980621111,"sku":"SP00003222","price":587.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab_logo_placeholder_727d3ae2-7939-4d6f-a1f3-0ca0257d038d.jpg?v=1788483079"},{"product_id":"dab-mascontrol-automatic-pump-controller","title":"Dab Pumps - MASCONTROL Automatic Pump Controller, Dry Run Protection - Midwest Warehouses","description":"\u003ch2\u003eDAB MASCONTROL Automatic Pump Controller\u003c\/h2\u003e\u003cp\u003eMASCONTROL is an automatic pump controller that combines a hydraulic body and an electronic control box into a single device that starts and stops a pump as taps open and close. It monitors both pressure and flow rather than pressure alone, so it holds pressure steady at the point of use and shuts the pump off immediately if the inlet runs dry or the suction is blocked. A check valve is built into the body, so one unit takes the place of the conventional pressure tank, pressure switch and check valve assembly. No adjustment and no maintenance are required.\u003c\/p\u003e\u003cp\u003eThe controller mounts vertically on the discharge column with the flow arrows pointing up, either directly on a surface pump outlet or between the pump and the first tap. It suits residential and commercial well systems, water conditioning, irrigation and booster duty, and works with surface pumps or submersible pumps. Three indicator lights on the front of the box report Power On, Pump On and Failure, and a Restart button restores normal operation once a fault has been corrected. On loss of power the unit resets and restarts automatically when power returns.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 in NPT - 31.9 PSI: 1 in NPT male connections, 31.9 PSI factory cut-in, which DAB's May 2025 catalog lists as 32 PSI. Pump must generate at least 43.5 PSI and the water column between the unit and the highest tap must not exceed 70 ft. DAB designation MCDV232101.\u003c\/li\u003e\n\u003cli\u003e1 in NPT - 43.5 PSI: 1 in NPT male connections, 43.5 PSI factory cut-in, which DAB's May 2025 catalog lists as 44 PSI. Pump must generate at least 55.1 PSI and the water column between the unit and the highest tap must not exceed 90 ft. DAB designation MCDV242101.\u003c\/li\u003e\n\u003cli\u003e1-1\/4 in NPT - 31.9 PSI: 1-1\/4 in NPT male connections for higher flow, 31.9 PSI factory cut-in, which DAB's May 2025 catalog lists as 32 PSI. Pump must generate at least 43.5 PSI and the water column between the unit and the highest tap must not exceed 70 ft. DAB designation MCDV232114.\u003c\/li\u003e\n\u003cli\u003e1-1\/4 in NPT - 43.5 PSI: 1-1\/4 in NPT male connections for higher flow, 43.5 PSI factory cut-in, which DAB's May 2025 catalog lists as 44 PSI. Pump must generate at least 55.1 PSI and the water column between the unit and the highest tap must not exceed 90 ft. DAB designation MCDV242114.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Automatic pump controller monitoring pressure and flow\u003c\/li\u003e\n\u003cli\u003eSupply Voltage: 115V or 230V single phase, dual voltage\u003c\/li\u003e\n\u003cli\u003eVoltage Tolerance: plus or minus 10 percent\u003c\/li\u003e\n\u003cli\u003eFrequency: 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eFull Load Amp Rating: 16 FLA at 115V, 20 FLA at 230V\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Pressure: 145 PSI\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: 32 F to 149 F\u003c\/li\u003e\n\u003cli\u003eFlow Capacity: up to 15 GPM on 1 in models, up to 25 GPM on 1-1\/4 in models\u003c\/li\u003e\n\u003cli\u003eHigher Flows: use a bypass installation above 25 GPM\u003c\/li\u003e\n\u003cli\u003eThreaded Connections: 1 in NPT or 1-1\/4 in NPT male, depending on model\u003c\/li\u003e\n\u003cli\u003eElectrical Conduit Connection: 1\/2 in threaded\u003c\/li\u003e\n\u003cli\u003eInsulation Class: II\u003c\/li\u003e\n\u003cli\u003eMounting: Vertical, fixed\u003c\/li\u003e\n\u003cli\u003eHousing: Glass fiber reinforced polyamide PA 6 FV 30 percent\u003c\/li\u003e\n\u003cli\u003eDiaphragm: EPDM\u003c\/li\u003e\n\u003cli\u003eSpring: Steel C 72 UNI 3545\u003c\/li\u003e\n\u003cli\u003eFlow Valve: Stainless steel AISI 304\u003c\/li\u003e\n\u003cli\u003eCheck Valve: Glass fiber reinforced polyamide PA 6 FV 30 percent\u003c\/li\u003e\n\u003cli\u003eControl Box Material: Self extinguishing thermoplastic resin 94-5VA\u003c\/li\u003e\n\u003cli\u003ePrinted Circuit: Vetronite\u003c\/li\u003e\n\u003cli\u003eSurge Protection: Varistor, zero-crossing switching technology\u003c\/li\u003e\n\u003cli\u003eLiquid: Clean water, free of solids and abrasives, non-viscous, non-aggressive, chemically neutral\u003c\/li\u003e\n\u003cli\u003eCertification: CSA \/ UL per the DAB USA price list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates the pressure tank and pressure switch\u003c\/li\u003e\n\u003cli\u003eMaintains constant pressure and constant flow at the tap\u003c\/li\u003e\n\u003cli\u003eBuilt-in run-dry protection stops the pump on loss of water\u003c\/li\u003e\n\u003cli\u003eBuilt-in check valve\u003c\/li\u003e\n\u003cli\u003eAbsorbs water hammer\u003c\/li\u003e\n\u003cli\u003eDual voltage 115V or 230V, no separate model to stock\u003c\/li\u003e\n\u003cli\u003eWorks with surface pumps or submersible pumps\u003c\/li\u003e\n\u003cli\u003eAutomatic reset and restart after a power outage\u003c\/li\u003e\n\u003cli\u003eManual Restart button with clear Power, Pump and Failure indicator lights\u003c\/li\u003e\n\u003cli\u003eNo adjustment and no maintenance required\u003c\/li\u003e\n\u003cli\u003eServiceable by replacing the electronic box or hydraulic body, no rebuild needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResidential and commercial well water systems\u003c\/li\u003e\n\u003cli\u003ePressure boosting where tank space is limited\u003c\/li\u003e\n\u003cli\u003eIrrigation and sprinkler supply\u003c\/li\u003e\n\u003cli\u003eWater conditioning and treatment feed\u003c\/li\u003e\n\u003cli\u003eRetrofits replacing a failed pressure tank and switch\u003c\/li\u003e\n\u003cli\u003eCabins, cottages and outbuildings on private water\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"1 in NPT - 31.9 PSI","offer_id":52945980784951,"sku":"109640410","price":660.0,"currency_code":"USD","in_stock":true},{"title":"1 in NPT - 43.5 PSI","offer_id":52945980817719,"sku":"109640420","price":660.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4 in NPT - 31.9 PSI","offer_id":52945980850487,"sku":"109640450","price":676.0,"currency_code":"USD","in_stock":true},{"title":"1-1\/4 in NPT - 43.5 PSI","offer_id":52945980883255,"sku":"109640460","price":676.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-mascontrol-automatic-pump-controller-1_f30de324-a990-4f23-babb-88b1f771a95c.jpg?v=1788491074"},{"product_id":"dab-replacement-electric-box-mascontrol-controlpress","title":"Dab Pumps - Replacement Electric Box for MASCONTROL and ControlPress - Midwest Warehouses","description":"\u003ch2\u003eDAB Replacement Electric Box for MASCONTROL and ControlPress\u003c\/h2\u003e\u003cp\u003eThis is the replacement electronic section for DAB MASCONTROL and ControlPress pump controllers. It is the dual voltage 115\/230V control box that carries the circuit board, the relay, the indicator lights and the Restart button, and it bolts onto the existing hydraulic body of the controller. DAB builds these controllers so that service is done by swapping a complete section rather than rebuilding internals.\u003c\/p\u003e\u003cp\u003eUse it when the hydraulic body of an installed MASCONTROL or ControlPress is sound but the electronics have failed, for example after a lightning strike, a surge, water ingress or relay wear. Swapping the electric box restores the controller without cutting the unit out of the pipe or repiping the system, which keeps a service call short. The hydraulic body is available separately if that is the failed half instead.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eReplacement Electric Box: Dual voltage 115\/230V electronic section, fits both MASCONTROL and ControlPress pump controllers, item 140049040\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Replacement electronic section for a pump controller\u003c\/li\u003e\n\u003cli\u003eFits: DAB MASCONTROL and DAB ControlPress pump controllers\u003c\/li\u003e\n\u003cli\u003eSupply Voltage: 115\/230V dual voltage\u003c\/li\u003e\n\u003cli\u003eCertification: CSA \/ UL per the DAB USA price list\u003c\/li\u003e\n\u003cli\u003eItem Code: 140049040\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRestores a MASCONTROL or ControlPress without replacing the whole controller\u003c\/li\u003e\n\u003cli\u003eDual voltage, so one part covers both 115V and 230V installations\u003c\/li\u003e\n\u003cli\u003eServes two controller families from a single stocked part\u003c\/li\u003e\n\u003cli\u003eNo repiping: the hydraulic body stays in the line\u003c\/li\u003e\n\u003cli\u003eFactory replacement part, not a rebuild kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eField service of an installed MASCONTROL controller\u003c\/li\u003e\n\u003cli\u003eField service of an installed ControlPress controller\u003c\/li\u003e\n\u003cli\u003eStorm and surge damage repair on well and booster systems\u003c\/li\u003e\n\u003cli\u003eService truck and dealer shelf stock\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Replacement Electric Box","offer_id":52945980948791,"sku":"140049040","price":573.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-replacement-electric-box-mascontrol-controlpress-1.jpg?v=1788494464"},{"product_id":"dab-controlpress-pump-controller-integrated-prv","title":"Dab Pumps - ControlPress 1-1\/4 in Pump Controller with Integrated PRV - Midwest Warehouses","description":"\u003ch2\u003eDAB ControlPress 1-1\/4 in Electronic Pump Controller\u003c\/h2\u003e\u003cp\u003eControlPress is an electronic pump controller with an integrated pressure reducing valve. Like a standard controller it starts and stops the pump as taps open and close and shuts the pump down if the water supply fails, protecting it from dry running. What sets it apart is the built-in regulator: it lets the installer cap the maximum pressure the pump can deliver and set the working pressure the system runs at, over a 35 to 100 PSI range, from one device in the line.\u003c\/p\u003e\u003cp\u003eThat combination matters on systems where the pump can generate more pressure than the piping and fixtures should see, which is common with submersible well pumps. Instead of installing a controller plus a separate pressure reducing valve ahead of it, ControlPress handles both in a single 1-1\/4 in body. It also removes the need for an expansion tank, check valve, filter and fittings, and it carries automatic restart after a failure along with an anti-jamming function. It is rated for surface and submersible pumps drawing up to 16 amps.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1-1\/4 in - 35 to 100 PSI: 1-1\/4 in connections, adjustable working pressure with integrated pressure reducing valve, DAB designation MCDV114PR, item 109640360\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Electronic pump controller with integrated pressure reducing valve\u003c\/li\u003e\n\u003cli\u003eConnection Size: 1-1\/4 in\u003c\/li\u003e\n\u003cli\u003eAdjustable Pressure Range: 35 to 100 PSI\u003c\/li\u003e\n\u003cli\u003eSupply Voltage: 115 Vac or 230 Vac\u003c\/li\u003e\n\u003cli\u003eMaximum Pump Current: 16 amps\u003c\/li\u003e\n\u003cli\u003ePump Types: Surface and submersible\u003c\/li\u003e\n\u003cli\u003eProtection: Dry running shutdown on water shortage\u003c\/li\u003e\n\u003cli\u003eRestart: Automatic restart after a failure, with anti-jamming function\u003c\/li\u003e\n\u003cli\u003eNot Required: Expansion tank, check valve, filter or fittings\u003c\/li\u003e\n\u003cli\u003eReplacement Electronics: DAB electric box item 140049040\u003c\/li\u003e\n\u003cli\u003eCertification: CSA \/ UL per the DAB USA price list\u003c\/li\u003e\n\u003cli\u003eDAB Designation: MCDV114PR\u003c\/li\u003e\n\u003cli\u003eItem Code: 109640360\u003c\/li\u003e\n\u003cli\u003eBarcode: 8019203610390\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntegrated pressure reducing valve, no separate PRV needed ahead of the controller\u003c\/li\u003e\n\u003cli\u003eAdjustable working pressure from 35 to 100 PSI\u003c\/li\u003e\n\u003cli\u003eCaps the maximum pressure a strong pump can put into the system\u003c\/li\u003e\n\u003cli\u003eStarts and stops the pump automatically on demand\u003c\/li\u003e\n\u003cli\u003eDry run protection stops the pump on water shortage\u003c\/li\u003e\n\u003cli\u003eAutomatic restart after a fault, plus an anti-jamming function\u003c\/li\u003e\n\u003cli\u003eReplaces the expansion tank, check valve, filter and fittings\u003c\/li\u003e\n\u003cli\u003eDual voltage, usable on 115 Vac or 230 Vac\u003c\/li\u003e\n\u003cli\u003e1-1\/4 in connections for higher flow than a 1 in controller\u003c\/li\u003e\n\u003cli\u003eElectronics serviceable with the same replacement electric box used by MASCONTROL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSubmersible well systems where pump pressure exceeds safe piping pressure\u003c\/li\u003e\n\u003cli\u003eDeep well installations needing both control and pressure regulation\u003c\/li\u003e\n\u003cli\u003eResidential and light commercial pressure boosting\u003c\/li\u003e\n\u003cli\u003eIrrigation systems requiring a set delivery pressure\u003c\/li\u003e\n\u003cli\u003eRetrofits replacing a controller plus separate pressure reducing valve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"1-1\/4 in - 35 to 100 PSI","offer_id":52945981079863,"sku":"109640360","price":1370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-controlpress-pump-controller-integrated-prv-1.jpg?v=1788491010"},{"product_id":"dab-tesla-4cbus-well-pump-control-box","title":"Dab Pumps - TESLA Well Pump Control Box for 3-Wire Submersible Motors - Midwest Warehouses","description":"\u003ch2\u003eDAB TESLA Well Pump Control Box for 3-Wire Submersible Motors\u003c\/h2\u003e\u003cp\u003eThe TESLA 4CBUS is the control box for DAB TESLA 4 in three wire single phase submersible motors, covering 0.5 HP through 5 HP. It houses the start capacitor, the run capacitor where fitted, the starting relay and the overload protector that a three wire motor needs in order to start and to be protected in service. The enclosure is metal with a protective painted coating and comes with three knockouts for conduit entry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA 3-wire single phase submersible motor cannot run without a matching control box.\u003c\/strong\u003e Unlike a three phase motor, a single phase motor produces only a fraction of its rated torque at startup, so the starting components it needs are placed outside the motor in the control box. DAB states plainly in the TESLA installation manual: the pump will not operate without this control box, and operation without the control box will burn out the motor. The box must also match the motor horsepower and voltage, because the capacitors and overload inside it are sized to that motor.\u003c\/p\u003e\u003cp\u003eTwo construction types are offered. The Small Type covers 0.5 HP to 1 HP and is capacitor start (CSIR); it is built in the Basic configuration only. The Large Type covers 1.5 HP to 5 HP and is capacitor start capacitor run (CSCR); it is offered in both Basic and Plus. The Plus boxes contain magnetic line contactors carefully matched to the motor rating, eliminating the need for external line contactors. Capacitor values are identical between Basic and Plus at every horsepower, so the choice is purely whether the contactor is built in or wired externally. Boxes are NEMA 3R rated for indoor or outdoor mounting and must be mounted vertically with the top side up so the starting relay works correctly.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.5 HP - 115V - Basic: 0.5 HP, 115V, capacitor start (CSIR) Small Type. 12.6 A maximum, start capacitor 250 to 300 uF at 125V. Branch protection 15 A Class RK1, RK5 or J fuses.\u003c\/li\u003e\n\u003cli\u003e0.5 HP - 230V - Basic: 0.5 HP, 230V, capacitor start (CSIR) Small Type. 6.8 A maximum, start capacitor 59 to 71 uF at 250V. Branch protection 10 A Class RK1, RK5 or J fuses.\u003c\/li\u003e\n\u003cli\u003e0.75 HP - 230V - Basic: 0.75 HP, 230V, capacitor start (CSIR) Small Type. 8.5 A maximum, start capacitor 86 to 103 uF at 250V. Branch protection 10 A Class RK1, RK5 or J fuses.\u003c\/li\u003e\n\u003cli\u003e1 HP - 230V - Basic: 1 HP, 230V, capacitor start (CSIR) Small Type. 9.8 A maximum, start capacitor 105 to 126 uF at 250V. Branch protection 15 A Class RK1, RK5 or J fuses.\u003c\/li\u003e\n\u003cli\u003e1.5 HP - 230V - Basic: 1.5 HP, 230V, capacitor start capacitor run (CSCR) Large Type, Basic. 12 A maximum, start capacitor 105 to 126 uF at 250V, run capacitor 10 uF at 370V. Branch protection 15 A.\u003c\/li\u003e\n\u003cli\u003e2 HP - 230V - Basic: 2 HP, 230V, capacitor start capacitor run (CSCR) Large Type, Basic. 12.3 A maximum, start capacitor 105 to 126 uF at 250V, run capacitor 20 uF at 370V. Branch protection 15 A.\u003c\/li\u003e\n\u003cli\u003e3 HP - 230V - Basic: 3 HP, 230V, capacitor start capacitor run (CSCR) Large Type, Basic. 16.2 A maximum, start capacitor 208 to 250 uF at 250V, run capacitor 45 uF at 370V. Branch protection 20 A.\u003c\/li\u003e\n\u003cli\u003e5 HP - 230V - Basic: 5 HP, 230V, capacitor start capacitor run (CSCR) Large Type, Basic. 25.5 A maximum, start capacitor 270 to 324 uF at 250V, run capacitors 2 x 40 uF at 370V. Branch protection 30 A.\u003c\/li\u003e\n\u003cli\u003e1.5 HP - 230V - Plus: 1.5 HP, 230V, CSCR Large Type, Plus. Same capacitors and 12 A rating as the 1.5 HP Basic, with a factory matched magnetic line contactor added so no external contactor is needed.\u003c\/li\u003e\n\u003cli\u003e2 HP - 230V - Plus: 2 HP, 230V, CSCR Large Type, Plus. Same capacitors and 12.3 A rating as the 2 HP Basic, with a factory matched magnetic line contactor added so no external contactor is needed.\u003c\/li\u003e\n\u003cli\u003e3 HP - 230V - Plus: 3 HP, 230V, CSCR Large Type, Plus. Same capacitors and 16.2 A rating as the 3 HP Basic, with a factory matched magnetic line contactor added so no external contactor is needed.\u003c\/li\u003e\n\u003cli\u003e5 HP - 230V - Plus: 5 HP, 230V, CSCR Large Type, Plus. Same capacitors and 25.5 A rating as the 5 HP Basic, with a factory matched magnetic line contactor added so no external contactor is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApplication: DAB TESLA 4 in three wire single phase submersible motors, 4GG and 4GX series\u003c\/li\u003e\n\u003cli\u003eHorsepower Range: 0.5 HP to 5 HP\u003c\/li\u003e\n\u003cli\u003eVoltage: 115V on the 0.5 HP 115V model, 230V on all other models\u003c\/li\u003e\n\u003cli\u003eFrequency: 60 Hz\u003c\/li\u003e\n\u003cli\u003ePhase: Single phase\u003c\/li\u003e\n\u003cli\u003eSmall Type 0.5 HP to 1 HP: Capacitor start, CSIR, Basic configuration only\u003c\/li\u003e\n\u003cli\u003eLarge Type 1.5 HP to 5 HP: Capacitor start capacitor run, CSCR, Basic or Plus\u003c\/li\u003e\n\u003cli\u003ePlus Configuration: Adds magnetic line contactors matched to the motor rating\u003c\/li\u003e\n\u003cli\u003eEnclosure: Metal casing with protective painted coating, NEMA 3R, indoor or outdoor\u003c\/li\u003e\n\u003cli\u003eConduit Knockouts: Three knockouts. Small Type 1\/2 in and 3\/4 in conduit. Large Type 1\/2 in and 1 in conduit\u003c\/li\u003e\n\u003cli\u003eSmall Type Enclosure Dimensions: 4.9 in by 8.2 in by 2.9 in\u003c\/li\u003e\n\u003cli\u003eLarge Type Enclosure Dimensions: 8.3 in by 9.8 in by 5.9 in\u003c\/li\u003e\n\u003cli\u003eMounting: Vertical, top side up\u003c\/li\u003e\n\u003cli\u003eField Wiring: 14-10 AWG, 75 C copper conductors only, terminal torque 20 lb in\u003c\/li\u003e\n\u003cli\u003eShort Circuit Rating: 5 kA when protected by the fuse class and size listed for the model\u003c\/li\u003e\n\u003cli\u003eCertification: CSA certified to Canadian and US standards, CSA certificate 70000094, project 70047806\u003c\/li\u003e\n\u003cli\u003eStandards: CSA C22.2 No. 14, CSA C22.2 No. 94.2, UL 508, UL 50E\u003c\/li\u003e\n\u003cli\u003eSiting Note: Shade the box from direct sunlight where ambient exceeds 95 F, as heat shortens capacitor life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequired starting and protection components for a 3-wire single phase submersible motor\u003c\/li\u003e\n\u003cli\u003eMatched by DAB to each motor horsepower and voltage\u003c\/li\u003e\n\u003cli\u003ePlus versions include a built-in magnetic line contactor, removing the external contactor\u003c\/li\u003e\n\u003cli\u003eIdentical capacitor values between Basic and Plus at every horsepower\u003c\/li\u003e\n\u003cli\u003eNEMA 3R metal enclosure with protective coating for indoor or outdoor mounting\u003c\/li\u003e\n\u003cli\u003eThree knockouts for straightforward conduit entry\u003c\/li\u003e\n\u003cli\u003eBuilt-in overload protector that trips on a shorted capacitor, voltage fault or locked pump\u003c\/li\u003e\n\u003cli\u003eCSA certified to both US and Canadian standards\u003c\/li\u003e\n\u003cli\u003eFull 0.5 HP to 5 HP coverage from one product line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResidential drilled well systems with 4 in three wire submersible pumps\u003c\/li\u003e\n\u003cli\u003eAgricultural and livestock water supply\u003c\/li\u003e\n\u003cli\u003eIrrigation wells\u003c\/li\u003e\n\u003cli\u003eReplacing a failed or undersized control box on an existing well\u003c\/li\u003e\n\u003cli\u003eNew submersible pump installations with DAB TESLA 4GG or 4GX motors\u003c\/li\u003e\n\u003cli\u003eWell service contractor truck stock across the common horsepower range\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"0.5 HP - 115V - Basic","offer_id":52945981145399,"sku":"60174729","price":171.0,"currency_code":"USD","in_stock":true},{"title":"0.5 HP - 230V - Basic","offer_id":52945981178167,"sku":"60174730","price":171.0,"currency_code":"USD","in_stock":true},{"title":"0.75 HP - 230V - Basic","offer_id":52945981210935,"sku":"60174731","price":186.0,"currency_code":"USD","in_stock":true},{"title":"1 HP - 230V - Basic","offer_id":52945981243703,"sku":"60174732","price":205.0,"currency_code":"USD","in_stock":true},{"title":"1.5 HP - 230V - Basic","offer_id":52945981276471,"sku":"60174733","price":298.0,"currency_code":"USD","in_stock":true},{"title":"2 HP - 230V - Basic","offer_id":52945981309239,"sku":"60174734","price":447.0,"currency_code":"USD","in_stock":true},{"title":"3 HP - 230V - Basic","offer_id":52945981342007,"sku":"60174735","price":524.0,"currency_code":"USD","in_stock":true},{"title":"5 HP - 230V - Basic","offer_id":52945981374775,"sku":"60174736","price":605.0,"currency_code":"USD","in_stock":true},{"title":"1.5 HP - 230V - Plus","offer_id":52945981407543,"sku":"60174737","price":391.0,"currency_code":"USD","in_stock":true},{"title":"2 HP - 230V - Plus","offer_id":52945981440311,"sku":"60174738","price":542.0,"currency_code":"USD","in_stock":true},{"title":"3 HP - 230V - Plus","offer_id":52945981473079,"sku":"60174739","price":616.0,"currency_code":"USD","in_stock":true},{"title":"5 HP - 230V - Plus","offer_id":52945981505847,"sku":"60184859","price":745.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-tesla-4cbus-well-pump-control-box-1_0f501ec2-527d-4e68-8e67-42b05f1682a3.jpg?v=1788491259"},{"product_id":"dab-tesla-6cbus-well-pump-control-box","title":"Dab Pumps - TESLA 6 in Well Pump Control Box, 7.5 HP to 15 HP 230V - Midwest Warehouses","description":"\u003ch2\u003eDAB TESLA 6 in Well Pump Control Box\u003c\/h2\u003e\u003cp\u003eThe TESLA 6CBUS is the large frame control box for DAB TESLA 6 in three wire single phase submersible motors, covering 7.5 HP, 10 HP and 15 HP at 230V. It carries the multiple start and run capacitors, the starting relay, the magnetic line contactor and the overload protection that a single phase motor of this size requires. All three ratings are built as Plus units, so the magnetic line contactors are already inside the box and matched to the motor rating, and no external line contactor has to be installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA 3-wire single phase submersible motor cannot run without a matching control box.\u003c\/strong\u003e Unlike a three phase motor, a single phase motor produces only a fraction of its rated torque at startup, so the starting components it needs are placed outside the motor in the control box. DAB states plainly in the TESLA installation manual: the pump will not operate without this control box, and operation without the control box will burn out the motor. The box must also match the motor horsepower and voltage, because the capacitors and overload inside it are sized to that motor.\u003c\/p\u003e\u003cp\u003eThese are capacitor start capacitor run boxes in a substantially larger enclosure than the 4 in range, roughly 15.4 in tall, reflecting the number and size of the capacitors involved. Single phase submersible control boxes use NEMA 3R enclosures for indoor or outdoor mounting and must be mounted vertically with the top side up, since relay manufacturers require correct relay orientation for reliable operation. Shade the box from direct sunlight where ambient temperature exceeds 95 F, because excessive heat dries out capacitors and shortens their life.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e7.5 HP - 230V - Plus: 7.5 HP, 230V, capacitor start capacitor run (CSCR), Plus. Run capacitor 45 uF at 370V. Start capacitors 270 to 324 uF and 216 to 260 uF, both at 330V. Matching GF6 motor draws 33 A rated, 37 A at service factor.\u003c\/li\u003e\n\u003cli\u003e10 HP - 230V - Plus: 10 HP, 230V, capacitor start capacitor run (CSCR), Plus. Run capacitors 2 x 35 uF at 370V. Start capacitors 270 to 324 uF, 216 to 260 uF and 130 to 156 uF, all at 330V. Matching GF6 motor draws 43 A rated, 49 A at service factor.\u003c\/li\u003e\n\u003cli\u003e15 HP - 230V - Plus: 15 HP, 230V, capacitor start capacitor run (CSCR), Plus. Run capacitors 3 x 45 uF at 370V. Start capacitors 270 to 324 uF, 270 to 324 uF and 161 to 193 uF, all at 330V. Matching GF6 motor draws 63 A rated, 74 A at service factor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApplication: DAB TESLA 6 in three wire single phase submersible motors, 6GF and 6GX series\u003c\/li\u003e\n\u003cli\u003eHorsepower Range: 7.5 HP, 10 HP and 15 HP\u003c\/li\u003e\n\u003cli\u003eVoltage: 230V\u003c\/li\u003e\n\u003cli\u003eFrequency: 60 Hz\u003c\/li\u003e\n\u003cli\u003ePhase: Single phase\u003c\/li\u003e\n\u003cli\u003eType: Capacitor start capacitor run, CSCR\u003c\/li\u003e\n\u003cli\u003eConfiguration: Plus only, magnetic line contactors included and matched to the motor rating\u003c\/li\u003e\n\u003cli\u003eEnclosure Rating: NEMA 3R, indoor or outdoor mounting\u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions: 8.268 in by 6.299 in, 15.433 in high, 16.535 in overall height\u003c\/li\u003e\n\u003cli\u003eConduit Knockouts: 1\/2 in conduit and 1 in conduit\u003c\/li\u003e\n\u003cli\u003eMounting: Vertical, top side up\u003c\/li\u003e\n\u003cli\u003eSiting Note: Shade from direct sunlight where ambient exceeds 95 F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequired starting and protection components for a 3-wire single phase 6 in submersible motor\u003c\/li\u003e\n\u003cli\u003eMagnetic line contactors built in and matched to the motor rating, so no external contactor is needed\u003c\/li\u003e\n\u003cli\u003eCapacitor start capacitor run design for high torque single phase starting at 7.5 to 15 HP\u003c\/li\u003e\n\u003cli\u003eMultiple start and run capacitors sized to each horsepower rating\u003c\/li\u003e\n\u003cli\u003eNEMA 3R enclosure suitable for indoor or outdoor mounting\u003c\/li\u003e\n\u003cli\u003e1\/2 in and 1 in conduit knockouts for larger feeder cable\u003c\/li\u003e\n\u003cli\u003eMatched by DAB to the TESLA GF6 single phase motor range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDeep and high head wells running 6 in single phase submersible pumps\u003c\/li\u003e\n\u003cli\u003eAgricultural irrigation where only single phase power is available\u003c\/li\u003e\n\u003cli\u003eMunicipal and community water supply wells on single phase service\u003c\/li\u003e\n\u003cli\u003eCommercial and industrial process water wells\u003c\/li\u003e\n\u003cli\u003eReplacing a failed control box on an existing 6 in single phase installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"7.5 HP - 230V - Plus","offer_id":52945981571383,"sku":"60184860","price":1556.0,"currency_code":"USD","in_stock":true},{"title":"10 HP - 230V - Plus","offer_id":52945981604151,"sku":"60184861","price":1841.0,"currency_code":"USD","in_stock":true},{"title":"15 HP - 230V - Plus","offer_id":52945981636919,"sku":"60184862","price":2560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-tesla-6cbus-well-pump-control-box-1.jpg?v=1788494470"},{"product_id":"dab-fa5-clear-inline-filter-housing","title":"Dab Pumps - FA 5 CLEAR Inline Sediment Filter Housing, 1 in NPT - Midwest Warehouses","description":"\u003ch2\u003eDAB FA 5 CLEAR Inline Filter Housing\u003c\/h2\u003e\u003cp\u003eThe FA 5 CLEAR is a 5 in inline filter housing with a clear polycarbonate bowl, used to hold a replaceable cartridge that strips sediment out of a water line. Because the bowl is transparent, you can see how loaded the cartridge is at a glance and change it on condition instead of on a guess, without breaking the housing open to check. The top body is technopolymer, the inlet and outlet threads are brass inserts, and a brass pressure relief plug is fitted so trapped pressure can be vented before the bowl is opened.\u003c\/p\u003e\u003cp\u003eIt installs fixed in a vertical position with 1 in NPT inlet and outlet, and is rated to 116 PSI at up to 30 GPM. Typical placement is upstream of a pump, a set of emitters or a treatment stage that sand and grit would damage. It is a standard fit on well and surface pump systems, drip and low flow irrigation, hydroponics and rainwater harvesting. The FA 5 CLEAR takes 5 in cartridges: the CRL 5 washable 60 micron mesh element or the CF5 string wound 20 micron element.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFA 5 CLEAR Housing - 1 in NPT: 5 in clear housing with brass pressure relief plug, takes 5 in cartridges, item LP030001\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Inline sediment filter housing with clear bowl\u003c\/li\u003e\n\u003cli\u003eCartridge Size: 5 in\u003c\/li\u003e\n\u003cli\u003eOperating Range: 1 to 30 GPM\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Pressure: 116 PSI\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature Range: 32 F to 104 F\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eInlet Connection: 1 in NPT\u003c\/li\u003e\n\u003cli\u003eOutlet Connection: 1 in NPT\u003c\/li\u003e\n\u003cli\u003eInstallation: Fixed, vertical position\u003c\/li\u003e\n\u003cli\u003eOverall Height: 7-1\/2 in\u003c\/li\u003e\n\u003cli\u003eBody Width: 4-3\/4 in\u003c\/li\u003e\n\u003cli\u003eWeight: 1.6 lbs\u003c\/li\u003e\n\u003cli\u003eTop Body Material: Technopolymer\u003c\/li\u003e\n\u003cli\u003eHousing Material: Clear polycarbonate\u003c\/li\u003e\n\u003cli\u003ePressure Relief Plug: Brass\u003c\/li\u003e\n\u003cli\u003eThread Inserts: Brass\u003c\/li\u003e\n\u003cli\u003eO-Ring Gasket: NBR\u003c\/li\u003e\n\u003cli\u003eLiquid: Non-viscous, non-aggressive, non-crystallized, chemically neutral, close to the characteristics of water\u003c\/li\u003e\n\u003cli\u003eCompatible Cartridges: CRL 5 washable 60 micron mesh, CF5 string wound 20 micron\u003c\/li\u003e\n\u003cli\u003eItem Code: LP030001\u003c\/li\u003e\n\u003cli\u003eBarcode: 8013415002080\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear polycarbonate bowl shows cartridge loading without opening the housing\u003c\/li\u003e\n\u003cli\u003eBrass pressure relief plug vents trapped pressure before servicing\u003c\/li\u003e\n\u003cli\u003eBrass thread inserts rather than bare plastic threads\u003c\/li\u003e\n\u003cli\u003eRated to 116 PSI and 30 GPM\u003c\/li\u003e\n\u003cli\u003eStandard 1 in NPT inlet and outlet\u003c\/li\u003e\n\u003cli\u003eTakes washable 60 micron mesh or 20 micron string wound cartridges\u003c\/li\u003e\n\u003cli\u003eCompact at 7-1\/2 in tall and 1.6 lbs\u003c\/li\u003e\n\u003cli\u003eProtects pumps, emitters and treatment equipment from sand and grit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResidential homes on well or surface water\u003c\/li\u003e\n\u003cli\u003eWater supply from shallow wells\u003c\/li\u003e\n\u003cli\u003eResidential and garden irrigation\u003c\/li\u003e\n\u003cli\u003eDrip and low flow irrigation where emitters plug easily\u003c\/li\u003e\n\u003cli\u003eHydroponics\u003c\/li\u003e\n\u003cli\u003eRainwater harvesting\u003c\/li\u003e\n\u003cli\u003eFarming and livestock water\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"FA 5 CLEAR - 1 in NPT","offer_id":52945981767991,"sku":"LP030001","price":76.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-fa5-clear-inline-filter-housing-1_d99e68fd-af73-4fbd-a7d5-3bddcdd3b4da.jpg?v=1788491028"},{"product_id":"dab-crl5-sediment-filter-cartridge-60-micron","title":"Dab Pumps - CRL 5 Washable Mesh Sediment Filter Cartridge, 60 Micron - Midwest Warehouses","description":"\u003ch2\u003eDAB CRL 5 Sediment Filter Cartridge\u003c\/h2\u003e\u003cp\u003eThe CRL 5 is a 5 in washable mesh sediment cartridge rated at 60 micron. It is the reusable element for the DAB FA 5 CLEAR clear filter housing: rather than being thrown away when it loads up, the mesh is pulled out, rinsed clean and put back, which suits sites with heavy sand or silt where a disposable cartridge would be consumed quickly and expensively.\u003c\/p\u003e\u003cp\u003eAt 60 micron it is a coarse strainer, sized to catch sand, grit and suspended solids that damage pump seals, block drip emitters and foul downstream treatment equipment. It is the usual first stage on well and surface water systems. Fitted in the clear FA 5 CLEAR bowl, the loading level is visible from outside, so cleaning intervals can be set by what you can actually see rather than by a calendar. For fine polishing instead of coarse straining, the CF5 string wound 20 micron cartridge fits the same housing.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCRL 5 - 60 Micron Mesh: 5 in washable mesh sediment cartridge for the FA 5 CLEAR housing, item P1591052\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Mesh washable sediment filter cartridge\u003c\/li\u003e\n\u003cli\u003eFiltration Rating: 60 micron\u003c\/li\u003e\n\u003cli\u003eCartridge Size: 5 in\u003c\/li\u003e\n\u003cli\u003eFits Housing: DAB FA 5 CLEAR clear filter housing, item LP030001\u003c\/li\u003e\n\u003cli\u003eReusable: Yes, washable and reusable\u003c\/li\u003e\n\u003cli\u003eHousing Operating Range: 1 to 30 GPM\u003c\/li\u003e\n\u003cli\u003eHousing Maximum Operating Pressure: 116 PSI\u003c\/li\u003e\n\u003cli\u003eHousing Liquid Temperature Range: 32 F to 104 F\u003c\/li\u003e\n\u003cli\u003eLiquid: Non-viscous, non-aggressive, non-crystallized, chemically neutral, close to the characteristics of water\u003c\/li\u003e\n\u003cli\u003eItem Code: P1591052\u003c\/li\u003e\n\u003cli\u003eBarcode: 8013415001816\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWashable and reusable, no repeat cartridge purchases\u003c\/li\u003e\n\u003cli\u003e60 micron mesh catches sand, grit and suspended solids\u003c\/li\u003e\n\u003cli\u003eDirect fit for the DAB FA 5 CLEAR clear filter housing\u003c\/li\u003e\n\u003cli\u003eLoading level visible through the clear FA 5 CLEAR bowl, so cleaning is done on condition\u003c\/li\u003e\n\u003cli\u003eWell suited to heavy sediment sites that consume disposable cartridges\u003c\/li\u003e\n\u003cli\u003eLower running cost than string wound elements over the life of the system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShallow well and surface water supply with sand carryover\u003c\/li\u003e\n\u003cli\u003ePump inlet protection\u003c\/li\u003e\n\u003cli\u003eDrip and low flow irrigation emitter protection\u003c\/li\u003e\n\u003cli\u003eHydroponics\u003c\/li\u003e\n\u003cli\u003eRainwater harvesting\u003c\/li\u003e\n\u003cli\u003eFarming and livestock water\u003c\/li\u003e\n\u003cli\u003ePre-filtration ahead of finer treatment stages\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"CRL 5 - 60 Micron Mesh","offer_id":52945983013175,"sku":"P1591052","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab_logo_placeholder_cca428e0-af46-4bc2-a03c-119f990026f6.jpg?v=1788483087"},{"product_id":"dab-nova-40th-anniversary-submersible-utility-pump","title":"Dab Pumps - NOVA 40th Anniversary Submersible Utility Pump 115V - Midwest Warehouses","description":"\u003ch2\u003eDAB NOVA 40th Anniversary Submersible Utility Pump\u003c\/h2\u003e\u003cp\u003eThe DAB NOVA is a 115 V single phase submersible pump for clear water and rainwater, completely redesigned in 2019 for the fortieth year of NOVA sales. The pump body, impeller and suction grid are technopolymer, the motor case is AISI 304 stainless steel and the rotor shaft is AISI 431 stainless steel, so the wetted parts resist corrosive attack. Sealing is a triple ring arrangement in an oil bath, the motor is a continuous duty asynchronous submersible type on oversized ball bearings, and thermal protection is built into every single phase version. DAB rates the pump for dry operation of up to 1 minute. Model suffixes tell you how it switches: \u003cstrong\u003eMA\u003c\/strong\u003e is automatic with a tethered float that starts and stops the pump on level, and \u003cstrong\u003eMNA\u003c\/strong\u003e is non-automatic, supplied without a float so the pump runs whenever it is energized or is switched by an external control. Every model in this listing uses a 1-1\/4 in NPT discharge and a 16 ft SJTOW cord. The 05SJTOW in DAB's item description is the 5 metre, 16 ft cord, and 40TH is the anniversary series, not a cord length.\u003c\/p\u003e\u003cp\u003eNOVA is built for residential and light commercial dewatering: flooded basements, garages and crawl spaces, window wells, elevator and utility pits, boat wells, and emptying tanks, cisterns, rain barrels and above ground pools. Because DAB sets the intake level low, a NOVA 180 or 200 will draw a basin down to 0.31 in, a NOVA 300 to 0.51 in and a NOVA 600 to 1.18 in, which matters when you are trying to finish a floor rather than just knock the water down. MA models drop straight into a pit and run unattended; MNA models suit a panel, a duplex controller or a hand switch.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNOVA 180 MNA: 1\/4 HP, no float, max flow 40 GPM, max head 16.1 ft\u003c\/li\u003e\n\u003cli\u003eNOVA 200 MNA: 1\/3 HP, no float, max flow 47 GPM, max head 18.7 ft\u003c\/li\u003e\n\u003cli\u003eNOVA 600 MNA: 1\/2 HP, no float, max flow 67 GPM, max head 33.1 ft\u003c\/li\u003e\n\u003cli\u003eNOVA 180 MA: 1\/4 HP, automatic with float, max flow 40 GPM, max head 16.1 ft\u003c\/li\u003e\n\u003cli\u003eNOVA 300 MA: 1\/3 HP, automatic with float, max flow 50 GPM, max head 18.7 ft\u003c\/li\u003e\n\u003cli\u003eNOVA 600 MA: 1\/2 HP, automatic with float, max flow 67 GPM, max head 33.1 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: 115 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003eMotor output: 1\/4 HP on NOVA 180, 1\/3 HP on NOVA 200 and NOVA 300, 1\/2 HP on NOVA 600\u003c\/li\u003e\n\u003cli\u003eRated current: 2.9 A on NOVA 180, 3.8 A on NOVA 200, 3.9 A on NOVA 300, 6.5 A on NOVA 600\u003c\/li\u003e\n\u003cli\u003eFamily operating range: 0.3 to 67 GPM, head to 33 ft\u003c\/li\u003e\n\u003cli\u003eDischarge connection: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003eFree passage: 0.2 in on NOVA 180 and NOVA 200, 0.4 in on NOVA 300 and NOVA 600\u003c\/li\u003e\n\u003cli\u003eMinimum intake level: 0.31 in on NOVA 180 and 200, 0.51 in on NOVA 300, 1.18 in on NOVA 600\u003c\/li\u003e\n\u003cli\u003eMaximum immersion depth: 23 ft\u003c\/li\u003e\n\u003cli\u003ePumped liquid: clear water or rainwater\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F for domestic use, 32 F to 122 F for other uses\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 68\u003c\/li\u003e\n\u003cli\u003eMotor insulation class: F\u003c\/li\u003e\n\u003cli\u003ePower cord: 16 ft SJTOW with plug\u003c\/li\u003e\n\u003cli\u003eMaterials: technopolymer pump body, impeller, suction grid and float; NBR O rings; AISI 304 stainless steel motor case; AISI 431 stainless steel rotor shaft\u003c\/li\u003e\n\u003cli\u003eInstallation: fixed or portable, vertical\u003c\/li\u003e\n\u003cli\u003eCertification: UL Std. No. 778 6th Ed. and CSA C22.2 No. 108-14\u003c\/li\u003e\n\u003cli\u003eShipping weight: 10.2 lb on NOVA 180, 200 and 300; 15.4 lb on NOVA 600\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRedesigned in 2019 for the fortieth year of NOVA production, with a more durable body and an easier carrying handle\u003c\/li\u003e\n\u003cli\u003eTriple ring seal in an oil bath and a continuous duty asynchronous motor on oversized ball bearings\u003c\/li\u003e\n\u003cli\u003eThermal protection built into every single phase version\u003c\/li\u003e\n\u003cli\u003eAISI 304 stainless steel motor case and AISI 431 stainless steel shaft for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLow intake level draws a basin down to 0.31 in on the NOVA 180 and 200\u003c\/li\u003e\n\u003cli\u003eRated for dry operation of up to 1 minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMA\u003c\/strong\u003e versions arrive ready to run automatically on a tethered float; \u003cstrong\u003eMNA\u003c\/strong\u003e versions are supplied without a float for external control\u003c\/li\u003e\n\u003cli\u003e1-1\/4 in NPT discharge and a 16 ft SJTOW cord on every model\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlooded basements, garages and crawl spaces\u003c\/li\u003e\n\u003cli\u003eWindow wells, elevator pits and utility pits\u003c\/li\u003e\n\u003cli\u003eEmptying tanks, cisterns and rain barrels\u003c\/li\u003e\n\u003cli\u003eAbove ground pool and pool cover drainage\u003c\/li\u003e\n\u003cli\u003eRainwater collection and reuse\u003c\/li\u003e\n\u003cli\u003eBoat wells and dock boxes\u003c\/li\u003e\n\u003cli\u003ePortable emergency dewatering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"NOVA 180 MNA","offer_id":52945983308087,"sku":"60200868H","price":356.0,"currency_code":"USD","in_stock":true},{"title":"NOVA 200 MNA","offer_id":52945983340855,"sku":"60200869H","price":378.0,"currency_code":"USD","in_stock":true},{"title":"NOVA 600 MNA","offer_id":52945983373623,"sku":"60200870H","price":425.0,"currency_code":"USD","in_stock":true},{"title":"NOVA 180 MA","offer_id":52945983406391,"sku":"60198429H","price":371.0,"currency_code":"USD","in_stock":true},{"title":"NOVA 300 MA","offer_id":52945983439159,"sku":"60198428H","price":394.0,"currency_code":"USD","in_stock":true},{"title":"NOVA 600 MA","offer_id":52945983471927,"sku":"60198425H","price":441.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-nova-40th-anniversary-submersible-utility-pump-1.jpg?v=1788491164"},{"product_id":"dab-nova-up-vertical-discharge-submersible-pump","title":"Dab Pumps - Nova UP Vertical Discharge Submersible Utility Pump 115V - Midwest Warehouses","description":"\u003ch2\u003eDAB Nova UP Vertical Discharge Submersible Pump\u003c\/h2\u003e\u003cp\u003eThe DAB Nova UP is a 115 V single phase submersible drainage pump whose discharge points straight up out of the top of the pump instead of sideways out of the volute. That one change is what the pump is for: the riser leaves the pit vertically, so the pump fits a narrow basin or a tight sump where a side outlet and a 90 degree elbow would not. The pump body, cover and suction grid are hydro resistant technopolymer, the motor casing, rotor shaft and fasteners are stainless steel, and sealing is a threefold arrangement with interposed rings and an oil pre-chamber. The motor is a continuous duty asynchronous submersible type with built in thermal-amperometric protection and a permanently connected capacitor, and the stator sits in an airtight stainless casing with an outer cover protecting the wiring and capacitor. \u003cstrong\u003eMA\u003c\/strong\u003e versions are automatic and carry a floating arm switch that cycles the pump on level. \u003cstrong\u003eMNA\u003c\/strong\u003e versions are non-automatic and are supplied without the float. Nova UP passes solids up to 0.4 in, and with the removable filter taken off it will suck down to roughly 0.1 in.\u003c\/p\u003e\u003cp\u003eUse it for domestic fixed installations that flood - basements, garages, stairwells and lift pits - and as a portable pump for emergencies: lifting water from tanks or rivers, emptying pools, fountains, excavations and pedestrian subways, and general garden and hobby duty. Because the MA models need clearance for the floating arm to swing, they want a deeper start level than the MNA models: DAB lists the minimum draught depth as 4.7 in for the 300 M-A and 6.5 in for the 600 M-A, against 2.4 in for the 300 M-NA and 2.8 in for the 600 M-NA. If you are working in a shallow basin, the MNA plus an external switch is usually the better answer.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNova UP 300 MA: 0.23 HP nominal output, 380 W input at 115 V, 2.8 A, automatic with floating arm switch, max head 23 ft and max flow 38 GPM on DAB's 60 Hz table\u003c\/li\u003e\n\u003cli\u003eNova UP 600 MA: 0.61 HP nominal output, 780 W input at 115 V, 5.6 A, automatic with floating arm switch, max head 30 ft and max flow 61 GPM on DAB's 60 Hz table\u003c\/li\u003e\n\u003cli\u003eNova UP 300 MNA: 0.23 HP nominal output, 380 W input at 115 V, 2.8 A, no float, max head 23 ft and max flow 38 GPM on DAB's 60 Hz table\u003c\/li\u003e\n\u003cli\u003eNova UP 600 MNA: 0.61 HP nominal output, 780 W input at 115 V, 5.6 A, no float, max head 30 ft and max flow 61 GPM on DAB's 60 Hz table\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: 115 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003ePower input P1: 380 W on the 300, 780 W on the 600\u003c\/li\u003e\n\u003cli\u003eRated current: 2.8 A on the 300, 5.6 A on the 600\u003c\/li\u003e\n\u003cli\u003eNominal output P2: 0.17 kW, 0.23 HP on the 300; 0.45 kW, 0.61 HP on the 600, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eFamily operating range: 4.4 to 66 GPM with total dynamic head up to 33 ft, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003ePer-model performance at 60 Hz: Nova UP 300, max head 23 ft (7 m) and max flow 38 GPM (8.7 m3\/h); Nova UP 600, max head 30 ft (9.2 m) and max flow 61 GPM (13.8 m3\/h), converted from the 115 V, 60 Hz rows of DAB's Nova UP instruction manual\u003c\/li\u003e\n\u003cli\u003eDischarge connection: vertical 1-1\/4 in female outlet at the top of the pump\u003c\/li\u003e\n\u003cli\u003eMaximum solids: 0.4 in\u003c\/li\u003e\n\u003cli\u003eLow level suction: down to about 0.1 in with the filter removed\u003c\/li\u003e\n\u003cli\u003eMinimum draught depth: 4.7 in on 300 M-A, 2.4 in on 300 M-NA, 6.5 in on 600 M-A, 2.8 in on 600 M-NA\u003c\/li\u003e\n\u003cli\u003eMaximum immersion depth: 16 ft (5 m) on the 115 V, 60 Hz versions per DAB's Nova UP instruction manual; DAB's May 2025 USA catalog prints 23 ft for the family\u003c\/li\u003e\n\u003cli\u003ePumped liquid: grey waters without fibers, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F for domestic use\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 68\u003c\/li\u003e\n\u003cli\u003eMotor insulation class: F\u003c\/li\u003e\n\u003cli\u003eMaterials: technopolymer pump body, cover, base, impeller and suction strainer; stainless steel motor casing, rotor shaft and fasteners; NBR O rings and V ring\u003c\/li\u003e\n\u003cli\u003eInstallation: vertical, fixed or portable\u003c\/li\u003e\n\u003cli\u003eCertification: in compliance with CSA Standards C22.2 No. 108-14 and UL Standard No. 778, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eShipping weight: 12.8 lb on 300 MA, 12.3 lb on 300 MNA, 16.1 lb on 600 MA, 15.7 lb on 600 MNA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVertical top discharge lets the riser leave a narrow pit straight up, with no side elbow\u003c\/li\u003e\n\u003cli\u003eThreefold seal with interposed rings and an oil pre-chamber\u003c\/li\u003e\n\u003cli\u003eBuilt in thermal-amperometric protection and a permanently connected capacitor\u003c\/li\u003e\n\u003cli\u003eStator in an airtight stainless steel casing, with an outer cover protecting the wiring and capacitor\u003c\/li\u003e\n\u003cli\u003eRotor on permanently lubricated, oversized ball bearings for low noise and long life\u003c\/li\u003e\n\u003cli\u003ePasses solids to 0.4 in, and drops to roughly 0.1 in suction with the filter removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMA\u003c\/strong\u003e versions run automatically on a floating arm switch; \u003cstrong\u003eMNA\u003c\/strong\u003e versions are supplied without a float and need less start depth\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNarrow sumps and basins where a side discharge will not clear the wall\u003c\/li\u003e\n\u003cli\u003eBasements, garages and stairwells prone to flooding\u003c\/li\u003e\n\u003cli\u003eLift pits and equipment pits\u003c\/li\u003e\n\u003cli\u003eEmptying tanks, pools, fountains and excavations\u003c\/li\u003e\n\u003cli\u003eLifting water from tanks or rivers in an emergency\u003c\/li\u003e\n\u003cli\u003eGarden, irrigation and hobby duty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Nova UP 300 MA","offer_id":52945983504695,"sku":"60164179","price":303.0,"currency_code":"USD","in_stock":true},{"title":"Nova UP 600 MA","offer_id":52945983537463,"sku":"60164180","price":411.0,"currency_code":"USD","in_stock":true},{"title":"Nova UP 300 MNA","offer_id":52945983570231,"sku":"60164181","price":285.0,"currency_code":"USD","in_stock":true},{"title":"Nova UP 600 MNA","offer_id":52945983602999,"sku":"60164182","price":393.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-nova-up-vertical-discharge-submersible-pump-1_7a19d202-ecbb-41e0-808f-5e142eabfc14.jpg?v=1788491176"},{"product_id":"dab-verty-nova-vertical-float-submersible-sump-pump","title":"Dab Pumps - Verty Nova Narrow Pit Sump Pump with Vertical Float 115V - Midwest Warehouses","description":"\u003ch2\u003eDAB Verty Nova Vertical Float Submersible Sump Pump\u003c\/h2\u003e\u003cp\u003eThe DAB Verty Nova is a 115 V single phase submersible pump with the float switch built into the body rather than hung off the side on a tether. That is the whole point of the design: with no arm to swing, the pump works in pits as small as 7.9 in by 7.9 in, where a tethered float pump would jam against the wall or short cycle. The switch is a vertical float behind a sliding cover, so it can be reached and cleaned without pulling the pump apart, and a lever on the body selects manual or automatic operation. In manual mode the pump primes and starts at a water level of only 0.4 to 0.6 in and will suck down to 0.1 in, which is as close to a dry floor as a submersible gets. The motor is thermally protected and cooled well enough that DAB rates it to keep running while only partially submerged. Each pump ships with a power cable and plug, a non return valve and a 4-step fitting.\u003c\/p\u003e\u003cp\u003eVerty Nova is built for grey water without fibres and clear water carrying particles up to 0.2 in, which makes it the right pump for a tight residential sump, a laundry or utility basin, a stairwell or lightwell drain, a lift pit, a boat well, or emptying a tank, pool or excavation. Two models cover the range: the 206 M at 1\/4 HP for ordinary basin duty, and the 406 M at 1\/2 HP when the discharge run is long or the lift is high.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVerty Nova 206 M: 1\/4 HP, integrated vertical float with manual\/auto lever, 2.7 A at 115 V, 9.3 lb\u003c\/li\u003e\n\u003cli\u003eVerty Nova 406 M: 1\/2 HP, integrated vertical float with manual\/auto lever, 7 A at 115 V, 11.2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: 115 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003eMotor output: 0.18 kW, 1\/4 HP on the 206 M; 0.37 kW, 1\/2 HP on the 406 M\u003c\/li\u003e\n\u003cli\u003eRated current: 2.7 A on the 206 M, 7 A on the 406 M\u003c\/li\u003e\n\u003cli\u003eCapacitor: 12.5 uF at 250 V on the 206 M, 20 uF at 250 V on the 406 M\u003c\/li\u003e\n\u003cli\u003eOperating range for the family: 4.4 to 51.8 GPM with head up to 29.7 ft, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eDischarge connection: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003eMinimum pit size: 7.9 in by 7.9 in\u003c\/li\u003e\n\u003cli\u003eMaximum particle size: 0.2 in\u003c\/li\u003e\n\u003cli\u003ePump priming and starting level: 0.4 to 0.6 in in manual operation\u003c\/li\u003e\n\u003cli\u003eLow suction capability: 0.1 in in manual mode\u003c\/li\u003e\n\u003cli\u003eMaximum immersion depth: 23 ft\u003c\/li\u003e\n\u003cli\u003ePumped liquid: grey water without fibres\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F for domestic use\u003c\/li\u003e\n\u003cli\u003eOverall height: 15.7 in; footprint 6.2 in by 8.9 in\u003c\/li\u003e\n\u003cli\u003ePower cord: 16 ft with plug\u003c\/li\u003e\n\u003cli\u003eSupplied with: non return valve and 4-step fitting\u003c\/li\u003e\n\u003cli\u003eMaterials: anti-corrosive and rust-proof\u003c\/li\u003e\n\u003cli\u003eCertification: in compliance with CSA Standards C22.2 No. 108-14 and UL Standard No. 778, per DAB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntegrated vertical float instead of a tethered float, so the pump works in pits down to 7.9 in by 7.9 in\u003c\/li\u003e\n\u003cli\u003eLever on the body selects manual or automatic operation\u003c\/li\u003e\n\u003cli\u003eSliding cover gives access to the float switch for cleaning without disassembly\u003c\/li\u003e\n\u003cli\u003eStarts at a 0.4 to 0.6 in level and pulls down to 0.1 in in manual mode\u003c\/li\u003e\n\u003cli\u003eMotor cooling lets the pump run even when only partially submerged\u003c\/li\u003e\n\u003cli\u003eMotor with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eShips complete with plug, non return valve and 4-step fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNarrow residential sump basins and crocks\u003c\/li\u003e\n\u003cli\u003eLaundry, utility and mechanical room basins\u003c\/li\u003e\n\u003cli\u003eStairwell, lightwell and areaway drains\u003c\/li\u003e\n\u003cli\u003eElevator and equipment pits\u003c\/li\u003e\n\u003cli\u003eBoat wells and dock boxes\u003c\/li\u003e\n\u003cli\u003eEmptying tanks, pools and excavations\u003c\/li\u003e\n\u003cli\u003eFloor drying down to 0.1 in in manual mode\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Verty Nova 206 M","offer_id":52945983635767,"sku":"60146276H","price":344.0,"currency_code":"USD","in_stock":true},{"title":"Verty Nova 406 M","offer_id":52945983668535,"sku":"60146278H","price":457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-verty-nova-vertical-float-submersible-sump-pump-1_bd38e45b-74c2-45cb-8429-af801d6658b5.jpg?v=1788491264"},{"product_id":"dab-nova-4100-continuous-circulation-pump","title":"Dab Pumps - NOVA 4100 Continuous Duty Submersible Circulation Pump - Midwest Warehouses","description":"\u003ch2\u003eDAB NOVA 4100 Continuous Circulation Pump\u003c\/h2\u003e\u003cp\u003eThe DAB NOVA 4100 is a submersible circulation pump built for duty that never stops. DAB designed it for recirculating water in ponds and for driving waterfalls and water features, and rates it explicitly for continuous operation, which is a different specification from an intermittent sump or utility pump that expects to sit idle between cycles. The pump body, top body, base, impellers and suction grid are hydro resistant technopolymer with wear-free impellers, the upper and lower motor casings are cast aluminum, the rotor shaft is AISI 416 stainless steel and the seal is a triple lip design in NBR. The motor is a continuous duty asynchronous submersible type with thermal overload protection and a wear-resistant shaft. Both versions in this listing ship with a 100 ft SJTOW cord, which is what lets the pump sit at the far end of a pond and still reach a GFCI receptacle. There is no float switch on either version.\u003c\/p\u003e\u003cp\u003eNOVA 4100 handles clean water without fibres carrying particles up to 0.393 in, and mounts either vertically or horizontally, so it can lie flat on a pond floor or stand in a vault. Typical duty is pond and water garden recirculation, waterfalls, streams, spillways, fountains and architectural water features, plus continuous turnover in tanks and basins. Choose the 115 V version for a standard North American 15 A circuit, or the 230 V version where a 230 V supply is already available and you want the lower running current of 3.2 A.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNOVA 4100 115 V: 0.5 HP nominal output, no float, max flow 3600 GPH (60 GPM), max head 31.2 ft, 7.1 A, 100 ft SJTOW cord\u003c\/li\u003e\n\u003cli\u003eNOVA 4100 230 V: 0.5 HP nominal output, no float, max flow 3600 GPH (60 GPM), max head 31.2 ft, 3.2 A, 100 ft SJTOW cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: single phase 1 x 110-127 V, 60 Hz, or single phase 1 x 220-240 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003ePower input P1: 0.9 HP, 670 W\u003c\/li\u003e\n\u003cli\u003eNominal output P2: 0.5 HP, 380 W\u003c\/li\u003e\n\u003cli\u003eRated current: 7.1 A at 115 V, 3.2 A at 230 V\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 3600 GPH, which is 60 GPM\u003c\/li\u003e\n\u003cli\u003eMaximum head: 31.2 ft at zero flow\u003c\/li\u003e\n\u003cli\u003eDuty points published by DAB in its NOVA 4100 USA technical sheet: 31.2 ft at 0 GPH, 30.2 ft at 300 GPH, 28.9 ft at 600 GPH, 27.3 ft at 900 GPH, 25.6 ft at 1200 GPH, 23.5 ft at 1500 GPH, 21.2 ft at 1800 GPH, 18.7 ft at 2100 GPH, 15.9 ft at 2400 GPH, 12.9 ft at 2700 GPH, 9.6 ft at 3000 GPH, 6.0 ft at 3300 GPH, 2.3 ft at 3600 GPH\u003c\/li\u003e\n\u003cli\u003eFamily operating range: 1.4 to 60 GPM with head up to 31 ft, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eDischarge connection: 1-1\/4 in\u003c\/li\u003e\n\u003cli\u003eMaximum particle size: 0.393 in\u003c\/li\u003e\n\u003cli\u003ePumped liquid: clean water, without fibres\u003c\/li\u003e\n\u003cli\u003eMaximum submersion: 22 ft\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 68\u003c\/li\u003e\n\u003cli\u003eMotor insulation class: F\u003c\/li\u003e\n\u003cli\u003ePower cord: 100 ft SJTOW\u003c\/li\u003e\n\u003cli\u003eOverall height 12.8 in, body 6.1 in by 5.5 in\u003c\/li\u003e\n\u003cli\u003eMaterials, from the materials table of DAB's NOVA 4100 USA technical sheet: technopolymer pump body, top body, base and impeller; 30 percent glass-filled polypropylene spacer body; cast aluminum upper and lower motor casings; AISI 416 stainless steel rotor shaft; NBR 70 O rings and triple lip seal; stainless steel 316 DIN 982 lock nut\u003c\/li\u003e\n\u003cli\u003eInstallation: vertical or horizontal\u003c\/li\u003e\n\u003cli\u003eCertification: in compliance with CSA Standards C22.2 No. 108-14 and UL Standard No. 778, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eShipping weight: 14.8 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRated by DAB for continuous operation, not intermittent cycling\u003c\/li\u003e\n\u003cli\u003e100 ft SJTOW cord reaches a receptacle from the far side of a pond\u003c\/li\u003e\n\u003cli\u003eWear-free technopolymer impellers and a wear-resistant motor shaft\u003c\/li\u003e\n\u003cli\u003eCast aluminum motor casings with a triple lip seal\u003c\/li\u003e\n\u003cli\u003eMounts vertically or horizontally\u003c\/li\u003e\n\u003cli\u003ePasses particles up to 0.393 in\u003c\/li\u003e\n\u003cli\u003eThermal overload protection built into the motor\u003c\/li\u003e\n\u003cli\u003eAvailable in 115 V and 230 V, 60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePond and water garden recirculation\u003c\/li\u003e\n\u003cli\u003eWaterfalls, streams and spillways\u003c\/li\u003e\n\u003cli\u003eFountains and architectural water features\u003c\/li\u003e\n\u003cli\u003eContinuous turnover in tanks and holding basins\u003c\/li\u003e\n\u003cli\u003eAeration and filtration loop feed\u003c\/li\u003e\n\u003cli\u003eLong-run installations where the receptacle is far from the water\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"115V\/60Hz, 100 ft SJTOW","offer_id":52945983799607,"sku":"60176098","price":452.0,"currency_code":"USD","in_stock":true},{"title":"230V\/60Hz, 100 ft SJTOW","offer_id":52945983832375,"sku":"60178448","price":452.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-nova-4100-continuous-circulation-pump-1_4f218c3a-54b9-4500-a539-d2bd16d852fc.jpg?v=1788491169"},{"product_id":"dab-feka-40th-anniversary-solids-handling-submersible-pump","title":"Dab Pumps - FEKA 40th Anniversary Solids Handling Submersible Pump - Midwest Warehouses","description":"\u003ch2\u003eDAB FEKA 40th Anniversary Solids Handling Submersible Pump\u003c\/h2\u003e\u003cp\u003eThe DAB FEKA is a 115 V single phase submersible pump for wastewater and rainwater, redesigned for the fortieth year of FEKA production. Where the NOVA is a clear water pump, the FEKA is built to pass solids: DAB rates the free passage at 1 in, so light grey and black wastewater, laundry discharge, washdown and rainwater carrying debris move through the impeller instead of blocking it. The pump body and suction grid are technopolymer, sealing is a triple ring arrangement in an oil bath, the motor case is AISI 304 stainless steel and the rotor shaft is AISI 431 stainless steel. The motor is a continuous duty asynchronous submersible type on oversized ball bearings with thermal protection built into every single phase version, and DAB rates the pump for dry running of up to 1 minute. \u003cstrong\u003eMA\u003c\/strong\u003e models are the automatic versions with an integrated float switch; \u003cstrong\u003eMNA\u003c\/strong\u003e models are the manual versions supplied without a float. All four models use a 1-1\/4 in NPT discharge and a 16 ft SJTOW cord.\u003c\/p\u003e\u003cp\u003eFEKA suits fixed or mobile installation wherever the water is not clean: basement laundry and utility basins, workshop and garage floor drains, gravity-fed grey water lift, wash bays, rainwater sumps that collect leaf litter and grit, farm and stable washdown, and flood response where the water has picked up debris on its way in. DAB sets the minimum intake level at 1.5 in, which is the trade-off you accept for a 1 in solids passage. Pick the 300 for ordinary basin duty and the 600 when the lift is high or the run is long.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFEKA 300 MNA: 1\/3 HP, no float, max flow 40 GPM, max head 16.4 ft\u003c\/li\u003e\n\u003cli\u003eFEKA 600 MNA: 1\/2 HP, no float, max flow 61.5 GPM, max head 27.2 ft\u003c\/li\u003e\n\u003cli\u003eFEKA 300 MA: 1\/3 HP, automatic with integrated float, max flow 40 GPM, max head 16.4 ft\u003c\/li\u003e\n\u003cli\u003eFEKA 600 MA: 1\/2 HP, automatic with integrated float, max flow 61.5 GPM, max head 27.2 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: 115 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003eMotor output: 1\/3 HP on the FEKA 300, 1\/2 HP on the FEKA 600\u003c\/li\u003e\n\u003cli\u003eRated current: 4.1 A on the FEKA 300, 6.3 A on the FEKA 600\u003c\/li\u003e\n\u003cli\u003eFamily operating range: 0.3 to 61 GPM, head to 27 ft\u003c\/li\u003e\n\u003cli\u003eDischarge connection: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003eFree passage: 1 in\u003c\/li\u003e\n\u003cli\u003eMinimum intake level: 1.5 in\u003c\/li\u003e\n\u003cli\u003eMaximum immersion depth: 23 ft\u003c\/li\u003e\n\u003cli\u003ePumped liquid: wastewater and rainwater\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F for domestic use, 32 F to 122 F for other uses\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 68\u003c\/li\u003e\n\u003cli\u003eMotor insulation class: F\u003c\/li\u003e\n\u003cli\u003ePower cord: 16 ft SJTOW with plug\u003c\/li\u003e\n\u003cli\u003eMaterials: technopolymer pump body, impeller, suction grid and float; NBR O rings; AISI 304 stainless steel motor case; AISI 431 stainless steel rotor shaft\u003c\/li\u003e\n\u003cli\u003eInstallation: fixed or portable, vertical\u003c\/li\u003e\n\u003cli\u003eCertification: UL Std. No. 778 6th Ed. and CSA C22.2 No. 108-14\u003c\/li\u003e\n\u003cli\u003eShipping weight: 10.1 lb on both FEKA 300 models, 15.4 lb on both FEKA 600 models\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 in free passage moves light wastewater, grey water and debris-laden rainwater\u003c\/li\u003e\n\u003cli\u003eRedesigned for the fortieth year of FEKA production for better durability and handling\u003c\/li\u003e\n\u003cli\u003eTriple ring seal in an oil bath and a continuous duty asynchronous motor on oversized ball bearings\u003c\/li\u003e\n\u003cli\u003eThermal protection built into every single phase version\u003c\/li\u003e\n\u003cli\u003eAISI 304 stainless steel motor case and AISI 431 stainless steel shaft resist corrosive attack\u003c\/li\u003e\n\u003cli\u003eRated for dry running of up to 1 minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMA\u003c\/strong\u003e versions carry an integrated float switch; \u003cstrong\u003eMNA\u003c\/strong\u003e versions are the manual build with no float\u003c\/li\u003e\n\u003cli\u003e1-1\/4 in NPT discharge and a 16 ft SJTOW cord on every model\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBasement laundry and utility basins\u003c\/li\u003e\n\u003cli\u003eGrey water lift from sinks, showers and washing machines\u003c\/li\u003e\n\u003cli\u003eWorkshop, garage and wash bay floor drains\u003c\/li\u003e\n\u003cli\u003eRainwater sumps carrying leaf litter and grit\u003c\/li\u003e\n\u003cli\u003eFarm, stable and kennel washdown\u003c\/li\u003e\n\u003cli\u003eFlood response where the water has picked up debris\u003c\/li\u003e\n\u003cli\u003eEmptying pits and tanks holding dirty water\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"FEKA 300 MNA","offer_id":52945983865143,"sku":"60200871H","price":404.0,"currency_code":"USD","in_stock":true},{"title":"FEKA 600 MNA","offer_id":52945983897911,"sku":"60200872H","price":435.0,"currency_code":"USD","in_stock":true},{"title":"FEKA 300 MA","offer_id":52945983930679,"sku":"60198427H","price":418.0,"currency_code":"USD","in_stock":true},{"title":"FEKA 600 MA","offer_id":52945983963447,"sku":"60198424H","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-feka-40th-anniversary-solids-handling-submersible-pump-1_1c7be513-3b4a-4706-adc9-76508ecc8468.jpg?v=1788491037"},{"product_id":"dab-feka-bvp-submersible-sewage-ejector-pump","title":"Dab Pumps - Feka BVP Submersible Sewage Ejector Pump 1.5 in Solids - Midwest Warehouses","description":"\u003ch2\u003eDAB Feka BVP Submersible Sewage Pump\u003c\/h2\u003e\u003cp\u003eThe DAB Feka BVP is the heavy duty end of DAB's submersible line: a 115 V single phase sewage pump rated to pass solid particles up to 1.5 in, with a family hydraulic envelope running from 4.4 to 105.7 GPM and head to 39 ft on the 750 M-A, 34 ft on the 700 M-A. That combination of solids capacity and flow is what separates it from the smaller FEKA and NOVA pumps, and it is why DAB files it under heavy duty rather than general drainage. Construction is anti-corrosion and anti-oxidation throughout, with a wear-resistant motor shaft and impeller and an anti-debris stainless steel strainer. The motor carries thermal protection against overheating and is cooled well enough that DAB rates the pump to run while only partially submerged. Both models in this listing are the \u003cstrong\u003eM-A\u003c\/strong\u003e build: single phase, automatic, with a float switch that starts and stops the pump on level. Each ships with a power cable and plug and a 3-level union, and DAB notes the union is supplied without a check valve, so plan on installing one in the discharge riser.\u003c\/p\u003e\u003cp\u003eUse it for drainage and emptying duty where the water carries real solids: sewage lift from a below-grade bathroom or laundry, septic and holding tank transfer, wash bay and equipment yard sumps, agricultural effluent, construction dewatering through mud and gravel, and flood response where the water has picked up everything on the floor. The 700 M-A and the 750 M-A share the same motor rating and the same body; they differ in hydraulic curve: DAB's Feka BVP selection table gives the 700 M-A a shutoff head of 34 ft (10.5 m) and the 750 M-A 39 ft (12 m), so pick on the duty point you need rather than on nameplate horsepower.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFeka BVP 700 M-A: 0.95 HP, automatic with float switch, 10.4 A at 115 V, max head 34 ft (10.5 m), 17.6 lb\u003c\/li\u003e\n\u003cli\u003eFeka BVP 750 M-A: 0.95 HP, automatic with float switch, 10.5 A at 115 V, max head 39 ft (12 m), 17.6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: 115 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003ePower input P1: 1.10 kW\u003c\/li\u003e\n\u003cli\u003eNominal output P2: 0.71 kW, 0.95 HP\u003c\/li\u003e\n\u003cli\u003eRated current: 10.4 A on the 700 M-A, 10.5 A on the 750 M-A\u003c\/li\u003e\n\u003cli\u003eCapacitor: 30 uF at 250 V\u003c\/li\u003e\n\u003cli\u003eOperating range for the family: 4.4 to 105.7 GPM with head up to 39 ft, per DAB's Feka BVP US spec sheet; the 39 ft shutoff belongs to the 750 M-A and the 700 M-A tops out at 34 ft\u003c\/li\u003e\n\u003cli\u003eDischarge connection: 1-1\/2 in NPT\u003c\/li\u003e\n\u003cli\u003eMaximum solid particle size: 1.5 in\u003c\/li\u003e\n\u003cli\u003eMaximum immersion depth: 23 ft\u003c\/li\u003e\n\u003cli\u003ePumped liquid: sewage water\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F\u003c\/li\u003e\n\u003cli\u003eOverall height 15.7 in, body 9.4 in by 5.9 in\u003c\/li\u003e\n\u003cli\u003ePower cord: 16 ft with plug\u003c\/li\u003e\n\u003cli\u003eSupplied with: 3-level union, without check valve\u003c\/li\u003e\n\u003cli\u003eMaterials: anti-corrosion and anti-oxidation, with an anti-debris stainless steel strainer\u003c\/li\u003e\n\u003cli\u003eCertification: in compliance with CSA Standards C22.2 No. 108-14 and UL Standard No. 778, per DAB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePasses solid particles up to 1.5 in, the largest in DAB's 115 V submersible line\u003c\/li\u003e\n\u003cli\u003eFamily flow envelope to 105.7 GPM, with shutoff head of 34 ft on the 700 M-A and 39 ft on the 750 M-A\u003c\/li\u003e\n\u003cli\u003eAnti-debris stainless steel strainer keeps rag and grit off the impeller inlet\u003c\/li\u003e\n\u003cli\u003eWear-resistant motor shaft and impeller\u003c\/li\u003e\n\u003cli\u003eMotor with thermal protection against overheating\u003c\/li\u003e\n\u003cli\u003eMotor cooling lets the pump run even when only partially submerged\u003c\/li\u003e\n\u003cli\u003eFloat switch fitted for automatic start and stop on level\u003c\/li\u003e\n\u003cli\u003eShips with plug and 3-level union; add a check valve in the riser\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSewage lift from below-grade bathrooms and laundries\u003c\/li\u003e\n\u003cli\u003eSeptic and holding tank transfer\u003c\/li\u003e\n\u003cli\u003eWash bay, equipment yard and truck wash sumps\u003c\/li\u003e\n\u003cli\u003eAgricultural and stable effluent\u003c\/li\u003e\n\u003cli\u003eConstruction dewatering through mud and gravel\u003c\/li\u003e\n\u003cli\u003eFlood response in heavily soiled water\u003c\/li\u003e\n\u003cli\u003eEmptying pits and basins that a 1 in solids pump would block in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Feka BVP 700 M-A","offer_id":52945983996215,"sku":"60152204H","price":710.0,"currency_code":"USD","in_stock":true},{"title":"Feka BVP 750 M-A","offer_id":52945984028983,"sku":"60146279H","price":781.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-feka-bvp-submersible-sewage-ejector-pump-1_5d387651-aab8-4c64-aee0-cbd18ab8e600.jpg?v=1788491045"},{"product_id":"dab-clear-answer-submersible-pond-pump","title":"Dab Pumps - Clear Answer Submersible Pond and Water Feature Pump 115V - Midwest Warehouses","description":"\u003ch2\u003eDAB Clear Answer Submersible Clean Water Pump\u003c\/h2\u003e\u003cp\u003eThe DAB Clear Answer is a 115 V single phase submersible pump for clean water, published by DAB as a pond and water feature pump: circulating water in garden ponds, driving waterfalls, and running fountains and play water features. It installs either vertically or horizontally, so it can lie on a pond floor or stand in a basin. The pump body, top body and base are glass-filled polypropylene, the impeller is Noryl, the upper and lower motor casings are cast aluminum and the rotor shaft is quenched AISI 416 stainless steel running in a triple lip NBR seal. The motor is an induction type, closed and cooled by the liquid being pumped, with built-in thermic overload protection and a capacitor permanently in circuit. Three sizes cover the range, from 31 GPM up to 70 GPM. \u003cstrong\u003eNone of the three is supplied with a float switch\u003c\/strong\u003e - DAB publishes no float on this family - so if you need level control, plan on an external switch or controller.\u003c\/p\u003e\u003cp\u003eDAB's published application for Clear Answer is water circulation rather than intermittent basin pump-out: garden ponds, waterfalls, streams and spillways, fountains and architectural water features, and continuous turnover in tanks and holding basins. DAB's stated liquid is pond water without fibres: clear water carrying particles up to 1\/3 in, within each model's rated size. All three models share a 1-1\/4 in NPT discharge, a 16 ft cord and a 16 ft maximum submersion.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClear Answer 1: 1\/4 HP, no float, max flow 31 GPM, max head 21 ft\u003c\/li\u003e\n\u003cli\u003eClear Answer 2: 1\/3 HP, no float, max flow 44 GPM, max head 30 ft\u003c\/li\u003e\n\u003cli\u003eClear Answer 3: 1\/2 HP, no float, max flow 70 GPM, max head 34 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: 115 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003ePower input P1: 280 W on Clear Answer 1, 370 W on Clear Answer 2, 820 W on Clear Answer 3\u003c\/li\u003e\n\u003cli\u003eRated current: 2.4 A, 3.4 A and 7.6 A respectively\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 9 psi on Clear Answer 1, 12 psi on Clear Answer 2, 14 psi on Clear Answer 3\u003c\/li\u003e\n\u003cli\u003eFamily operating range: 4.4 to 70 GPM with head up to 34 ft, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eDischarge connection: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003eMaximum solids: 0.3 in on Clear Answer 1, 0.4 in on Clear Answer 2 and 3\u003c\/li\u003e\n\u003cli\u003eMaximum submersion: 16 ft\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F\u003c\/li\u003e\n\u003cli\u003eMaximum ambient temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eLiquid quality: pond waters without fibers - clear water carrying particles up to the model's rated size, which DAB gives as up to 1\/3 in across the range\u003c\/li\u003e\n\u003cli\u003eMotor protection: NEMA 6P\u003c\/li\u003e\n\u003cli\u003eMotor insulation class: F\u003c\/li\u003e\n\u003cli\u003ePower cord: 16 ft\u003c\/li\u003e\n\u003cli\u003eOverall height 10.5 in, body 5.5 in by 6.1 in\u003c\/li\u003e\n\u003cli\u003eMaterials: glass-filled polypropylene pump body, top body and base; Noryl impeller; cast aluminum upper and lower motor casings; quenched AISI 416 stainless steel rotor shaft; NBR 70 O rings and triple lip seal; stainless steel 316 lock nut\u003c\/li\u003e\n\u003cli\u003eInstallation: fixed or portable, vertical or horizontal\u003c\/li\u003e\n\u003cli\u003eCertification: in compliance with CSA Standards C22.2 No. 108-14 and UL Standard No. 778, per DAB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree sizes from 31 GPM to 70 GPM on one 1-1\/4 in NPT discharge\u003c\/li\u003e\n\u003cli\u003eInduction motor closed and cooled by the pumped liquid, for sustained circulation duty\u003c\/li\u003e\n\u003cli\u003eCast aluminum motor casings with a wear-resistant shaft and triple lip seals\u003c\/li\u003e\n\u003cli\u003eCapacitor permanently in circuit and built-in thermic overload protection\u003c\/li\u003e\n\u003cli\u003eMounts vertically or horizontally\u003c\/li\u003e\n\u003cli\u003eNEMA 6P motor protection\u003c\/li\u003e\n\u003cli\u003eShips with a 16 ft power cable and plug and a self-sealing fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied without a float switch\u003c\/em\u003e - pair with an external level control if you need automatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGarden pond and water garden circulation\u003c\/li\u003e\n\u003cli\u003eWaterfalls, streams and spillways\u003c\/li\u003e\n\u003cli\u003eFountains and architectural water features\u003c\/li\u003e\n\u003cli\u003eContinuous turnover in tanks and holding basins\u003c\/li\u003e\n\u003cli\u003eFiltration and aeration loop feed\u003c\/li\u003e\n\u003cli\u003eClean water transfer with an external switch or manual control\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Clear Answer 1","offer_id":52945984127287,"sku":"60204004","price":361.0,"currency_code":"USD","in_stock":true},{"title":"Clear Answer 2","offer_id":52945984160055,"sku":"60204005","price":415.0,"currency_code":"USD","in_stock":true},{"title":"Clear Answer 3","offer_id":52945984192823,"sku":"60204006","price":463.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-clear-answer-submersible-pond-pump-1_cf1181f4-1fec-4e88-9452-73ccbb3b6822.jpg?v=1788491005"},{"product_id":"dab-solid-answer-submersible-solids-handling-pump","title":"Dab Pumps - Solid Answer Submersible Pond Pump 1-1\/4 in Solids 115V - Midwest Warehouses","description":"\u003ch2\u003eDAB Solid Answer Submersible Pond and Water Feature Pump\u003c\/h2\u003e\u003cp\u003eThe DAB Solid Answer is the debris-tolerant sibling of the Clear Answer: the same 115 V single phase submersible platform, but built to pass particles up to 1-1\/4 in instead of a fraction of an inch. That free passage comes from a different wet end - a nylon impeller with a diffuser and a self-priming disc behind an anti-debris stainless steel strainer, in place of the Clear Answer's clean water hydraulics. The pump body and top body are glass-filled polypropylene, the motor casings are cast aluminum, the rotor shaft is quenched AISI 416 stainless steel, and sealing is a triple lip NBR arrangement. The motor is an induction type, closed and cooled by the liquid being pumped, with built-in thermic overload protection and a capacitor permanently in circuit. It installs vertically or horizontally. \u003cstrong\u003eNone of the three models is supplied with a float switch\u003c\/strong\u003e - DAB publishes no float on this family - so pair it with an external level control if you need automatic operation.\u003c\/p\u003e\u003cp\u003eDAB publishes Solid Answer only as a pond and water feature pump - circulating water in garden ponds, creating waterfalls and running play water features - and that is where the 1-1\/4 in passage earns its keep: leaf litter, string algae, gravel wash and silt move through the impeller instead of clogging a filter-fed circulator. DAB's stated liquid is pond water without fibers carrying particles up to 1-1\/4 in, so this is not a septic, sewage or grey water basin pump and should not be specified as one. Three sizes cover 24 to 54 GPM on a common 1-1\/4 in NPT discharge, with a 16 ft cord and 16 ft maximum submersion across the range.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSolid Answer 4: 1\/4 HP, no float, max flow 24 GPM, max head 11.5 ft\u003c\/li\u003e\n\u003cli\u003eSolid Answer 5: 1\/3 HP, no float, max flow 32 GPM, max head 16.4 ft\u003c\/li\u003e\n\u003cli\u003eSolid Answer 6: 1\/2 HP, no float, max flow 54 GPM, max head 29.5 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower supply: 115 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003ePower input P1: 235 W on Solid Answer 4, 320 W on Solid Answer 5, 880 W on Solid Answer 6\u003c\/li\u003e\n\u003cli\u003eRated current: 1.9 A, 2.4 A and 8.0 A respectively\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 5 psi on Solid Answer 4, 7 psi on Solid Answer 5, 12 psi on Solid Answer 6\u003c\/li\u003e\n\u003cli\u003eFamily operating range: 4.4 to 54 GPM with head up to 29.5 ft, per DAB's May 2025 USA catalog\u003c\/li\u003e\n\u003cli\u003eDischarge connection: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003eMaximum solids: 1-1\/4 in on all three models\u003c\/li\u003e\n\u003cli\u003ePumped liquid: pond waters without fibers, carrying particles up to 1-1\/4 in\u003c\/li\u003e\n\u003cli\u003eMaximum submersion: 16 ft\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: 32 F to 95 F\u003c\/li\u003e\n\u003cli\u003eMaximum ambient temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eMotor protection: NEMA 6P\u003c\/li\u003e\n\u003cli\u003eMotor insulation class: F\u003c\/li\u003e\n\u003cli\u003ePower cord: 16 ft\u003c\/li\u003e\n\u003cli\u003eOverall height 13.875 in, body 5.25 in by 6 in\u003c\/li\u003e\n\u003cli\u003eMaterials: glass-filled polypropylene pump body and top body; nylon impeller with diffuser and self-priming disc; anti-debris stainless steel strainer; cast aluminum upper and lower motor casings; quenched AISI 416 stainless steel rotor shaft; NBR 70 O rings and triple lip seal; stainless steel 316 lock nut and A2 stainless washer\u003c\/li\u003e\n\u003cli\u003eInstallation: fixed or portable, vertical or horizontal\u003c\/li\u003e\n\u003cli\u003eCertification: in compliance with CSA Standards C22.2 No. 108-14 and UL Standard No. 778, per DAB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-1\/4 in free passage on every model, from the 1\/4 HP up to the 1\/2 HP\u003c\/li\u003e\n\u003cli\u003eAnti-debris stainless steel strainer instead of a fine clean water grid\u003c\/li\u003e\n\u003cli\u003eNylon impeller with diffuser and self-priming disc\u003c\/li\u003e\n\u003cli\u003eInduction motor closed and cooled by the pumped liquid\u003c\/li\u003e\n\u003cli\u003eCast aluminum motor casings, quenched stainless shaft and triple lip seals\u003c\/li\u003e\n\u003cli\u003eCapacitor permanently in circuit with built-in thermic overload protection\u003c\/li\u003e\n\u003cli\u003eMounts vertically or horizontally; NEMA 6P motor protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSupplied without a float switch\u003c\/em\u003e - add an external level control for automatic duty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePond and water garden circulation where leaf litter and algae are present\u003c\/li\u003e\n\u003cli\u003eWaterfalls, streams and spillways fed from a debris-laden basin\u003c\/li\u003e\n\u003cli\u003eFountains and water features on untreated water\u003c\/li\u003e\n\u003cli\u003eGravel wash and silt-laden pond water circulation\u003c\/li\u003e\n\u003cli\u003eFiltration and aeration loop feed on pond water\u003c\/li\u003e\n\u003cli\u003ePond drawdown and refill under manual or external control\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Solid Answer 4","offer_id":52945984225591,"sku":"60204007","price":426.0,"currency_code":"USD","in_stock":true},{"title":"Solid Answer 5","offer_id":52945984258359,"sku":"60204008","price":463.0,"currency_code":"USD","in_stock":true},{"title":"Solid Answer 6","offer_id":52945984291127,"sku":"60204009","price":509.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-solid-answer-submersible-solids-handling-pump-1_79ec757d-3183-4ca9-bb8b-31442f610117.jpg?v=1788491253"},{"product_id":"dab-pumps-dtron2-submersible-on-demand-pressure-pump","title":"Dab Pumps - DTron 2 Submersible On-Demand Water Pressure Pump 115V - Midwest Warehouses","description":"\u003ch2\u003eDAB DTron 2 Submersible On-Demand Pressure Pump\u003c\/h2\u003e\u003cp\u003eThe DAB DTron 2 is a 7 in three stage submersible pump that pressurizes a house, a cistern or a well with no controller on the wall and no external pressure tank. Control is straight \u003cstrong\u003eon\/off\u003c\/strong\u003e. An integrated pressure switch and flow switch feed the electronic board, the motor runs at line frequency the moment pressure falls under the cut-in or a tap opens, and it drops out about 10 seconds after flow stops. It is \u003cem\u003enot\u003c\/em\u003e a variable speed or inverter driven pump. CSA certificate 80018347 tabulates the DTron 2 control type as ON\/OFF for all three duty points, and the inverter driven machine in DAB's submersible range is the EsyBox Diver, not the DTron. Cut-in is fixed at the factory at 34.8 psi (2.4 bar): there is nothing to set, nothing to wire and no Com Box. Where an adjustable set point, alarm readout, app monitoring or tank level measurement is wanted, that is the DTron 3.\u003c\/p\u003e\u003cp\u003eConstruction is technopolymer where water touches it and stainless steel where load is carried. The casing, diffusers and filter are technopolymer for corrosion and oxidation resistance; the three impellers are technopolymer running against AISI 304 floating and stationary wear rings; the motor sleeve is AISI 304 and the hydraulic end of the shaft is AISI 303. A double mechanical seal sits in an oil chamber. A non-return valve, an overpressure valve, a bleed valve for fast first priming and a 0.04 liter expansion vessel are all built inside the pump, which is why no separate pressure tank is required. The complete unit carries IP 68, not merely the motor, and the 49 ft (15 m) cord releases at the pump through a quick coupling with an anti tear-off connection. Three protections run without setup: anti dry run parks the pump and retries on a timed schedule until water returns, anti-burping suppresses false starts on gurgling water, and ANTIFLOOD alarms instead of running on when grit holds the non-return valve open. DAB's \u003cstrong\u003eNFC Float\u003c\/strong\u003e (item 60184577) drops into a pocket on the pump and speaks to the board with no wiring and without opening the sealed housing.\u003c\/p\u003e\u003ch3\u003eChoosing the Suction Base\u003c\/h3\u003e\u003cp\u003eEvery DTron 2 duty point is built in two suction bases, and that is the second choice on this page. The hydraulics, motor, electronics, cable length, certification and price are the same either way; what changes is where the pump draws its water from.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard suction base.\u003c\/strong\u003e Open filter base with a splitter that keeps the pump off the very bottom down to a 3.1 in level. The splitter can be trimmed or removed to pull down to a 1.38 in remaining level, and the included spacer sets intake height at 1.4 in, 1.6 in, 2.4 in or 3.1 in above the floor of the tank. Item codes 60197689 (35\/90), 60195643 (45\/90) and 60197690 (35\/120).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter X suction base.\u003c\/strong\u003e Closed base, not watertight, carrying a \u003cstrong\u003e1 in NPT female connection\u003c\/strong\u003e in place of the open bottom strainer. That port takes DAB's \u003cstrong\u003eKit X\u003c\/strong\u003e assembly, a 3.2 ft (1 m) suction hose with a float, so the pump draws from a chosen point in the water column rather than off a floor where sand, silt and leaf litter settle. It suits a dug well, a bore with a sediment layer or a cistern that is never cleaned out. Kit X is listed by DAB as an option, so confirm the contents of the carton when you order. Item codes 60202762 (35\/90), 60202763 (45\/90) and 60202764 (35\/120).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDrinking water designation differs between the two bases.\u003c\/strong\u003e DAB appends the suffix \u003cstrong\u003e- NSF\u003c\/strong\u003e to the item description of the three standard base codes and does not append it to the three filter X codes. DAB's May 2025 US catalog states the DTron 2 is approved to NSF 61, NSF 372, UL and CSA standards against those three standard codes. The filter X codes carry no NSF designation in DAB's US item list, and DAB offers a drinking water version of the X on request. Order the standard suction base for potable service.\u003c\/p\u003e\u003cp\u003eThe two bases differ dimensionally only in height. Maximum pump diameter is 7.28 in (185 mm) either way, which DAB's May 2025 US catalog rounds to 7.3 in, so both need the same minimum 7.09 in by 7.28 in opening to pass into a tank. A standard DTron 2 stands 24.05 in (611 mm) tall and weighs 25.1 lb; a filter X DTron 2 stands 25.04 in (636 mm) and weighs 25.4 lb.\u003c\/p\u003e\u003cp\u003eTypical installations are cisterns and rainwater tanks, drilled and dug wells, and buried or above ground storage tanks feeding a house. The pump can sit fully submerged, partially submerged, vertical or horizontal, and with DAB's DOC68 accessory (item 60192276) it mounts dry outside the tank and runs as an IP 68 flooded suction booster. DAB asks for at least 3.28 ft between the pump suction and the bottom of a well, and that the pump be held slightly clear of the tank floor so it does not transmit noise into the structure.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cp\u003eDAB names these pumps by nominal duty point: the first number is nominal maximum head in meters and the second is nominal maximum flow in liters per minute. A 45\/90 is nominally 45 m and 90 L\/min, a 35\/120 is nominally 35 m and 120 L\/min, and DAB's measured curves round differently from the names in both directions. \u003cstrong\u003eTwo DAB documents disagree on maximum head and this listing shows both.\u003c\/strong\u003e The figures below are from DAB's 2020 US technical sheet curve tables and Table 1 of the DTron instruction manual. The Max Head column of DAB's May 2025 US catalog instead reads 118 ft on the 35\/90, 134 ft on the 45\/90 and 146 ft on the 35\/120 for these same item codes, which does not agree with DAB's own curves and reverses the ranking of the 45\/90 against the 35\/120. Size against the curve values below, confirm with DAB before quoting a marginal lift, and do not treat either set as settled.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTron 2 35\/90\u003c\/strong\u003e: 121 ft (37 m) shutoff head and 26.4 gpm (100 L\/min) maximum flow on DAB's curve, against 118 ft and 26 gpm in the May 2025 catalog. 0.7 HP (0.52 kW) nominal at 60 Hz, 750 W input, 7.4 A at 115V. The entry model and the lightest draw of the three, suited to a single bathroom or a shallow tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTron 2 45\/90\u003c\/strong\u003e: 147 ft (45 m) shutoff head and 27.7 gpm (105 L\/min) maximum flow on DAB's curve, against 134 ft and 26 gpm in the May 2025 catalog. 0.9 HP (0.67 kW) nominal at 60 Hz, 1050 W input, 9.7 A at 115V. The high head choice for a deep tank, a long run or a house with upper floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTron 2 35\/120\u003c\/strong\u003e: 125 ft (38 m) shutoff head and 33 gpm (125 L\/min) maximum flow on DAB's curve, against 146 ft and 34 gpm in the May 2025 catalog. 0.9 HP (0.67 kW) nominal at 60 Hz, 950 W input, 8.8 A at 115V. The high flow choice where several fixtures or irrigation zones run at once.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Electronic on\/off multistage submersible pump; no inverter and no variable speed drive\u003c\/li\u003e\n\u003cli\u003eControl Devices: Integrated pressure switch and flow switch on the electronic board\u003c\/li\u003e\n\u003cli\u003eCut-In Pressure: Factory fixed at 34.8 psi (2.4 bar) plus or minus 0.2 bar; not field adjustable\u003c\/li\u003e\n\u003cli\u003eStop Delay: About 10 seconds after flow ceases\u003c\/li\u003e\n\u003cli\u003eSupply: 115V, 60 Hz, single phase, cord and plug connected\u003c\/li\u003e\n\u003cli\u003eRated Output P2 at 60 Hz: 0.7 HP (0.52 kW) on the 35\/90; 0.9 HP (0.67 kW) on the 45\/90 and 35\/120\u003c\/li\u003e\n\u003cli\u003eInput Power P1: 750 W, 1050 W or 950 W by model\u003c\/li\u003e\n\u003cli\u003eFull Load Current: 7.4 A, 9.7 A or 8.8 A at 115V by model\u003c\/li\u003e\n\u003cli\u003eShutoff Head on DAB's Curve: 121 ft, 147 ft or 125 ft by model; DAB's May 2025 catalog column reads 118 ft, 134 ft and 146 ft\u003c\/li\u003e\n\u003cli\u003eMaximum Flow: 26.4 gpm, 27.7 gpm or 33 gpm by model\u003c\/li\u003e\n\u003cli\u003eMotor Capacitor: 35 uF at 275 V, DAB spare part SP00006811\u003c\/li\u003e\n\u003cli\u003eDischarge: 1-1\/4 in NPT threaded outlet\u003c\/li\u003e\n\u003cli\u003eSuction, Standard Base: Open filter, intake height set to 1.4 in, 1.6 in, 2.4 in or 3.1 in with the included spacer\u003c\/li\u003e\n\u003cli\u003eSuction, Filter X Base: Closed filter X with 1 in NPT female connection for DAB's Kit X floating suction hose\u003c\/li\u003e\n\u003cli\u003eFree Passage: 0.08 in (2 mm) per DAB's technical sheet; the May 2025 catalog prints 0.1 in\u003c\/li\u003e\n\u003cli\u003eMinimum Suction Level: 4.33 in (110 mm)\u003c\/li\u003e\n\u003cli\u003eMinimum Remaining Water Level: 1.38 in (35 mm)\u003c\/li\u003e\n\u003cli\u003eMaximum Immersion Depth: 49 ft (15 m)\u003c\/li\u003e\n\u003cli\u003eLiquid and Ambient Temperature: 32 F to 122 F (0 C to 50 C)\u003c\/li\u003e\n\u003cli\u003eMaximum Starts Per Hour: 60\u003c\/li\u003e\n\u003cli\u003eDuty: Continuous service rated\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 68 over the complete pump\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F, with integrated capacitor and thermal overload protection\u003c\/li\u003e\n\u003cli\u003ePower Cable: 49 ft (15 m) with plug and quick coupling connector on both suction bases\u003c\/li\u003e\n\u003cli\u003eExpansion Vessel: 0.04 liter, integrated, maintenance free, never recharged\u003c\/li\u003e\n\u003cli\u003eWetted Construction: Technopolymer casing, diffusers, filter and impellers; AISI 304 wear rings and motor sleeve; AISI 303 shaft on the hydraulic end; double mechanical seal in an oil chamber\u003c\/li\u003e\n\u003cli\u003eMaximum Pump Diameter: 7.28 in (185 mm) on both suction bases, printed as 7.3 in by DAB's May 2025 US catalog\u003c\/li\u003e\n\u003cli\u003eOverall Height: 24.05 in (611 mm) standard base; 25.04 in (636 mm) filter X base\u003c\/li\u003e\n\u003cli\u003eWeight: 25.1 lb (11.4 kg) standard base; 25.4 lb (11.5 kg) filter X base\u003c\/li\u003e\n\u003cli\u003eAgency Certification: CSA certificate 80018347, CSA mark with C and US indicators, certified to CSA C22.2 No. 108-14 Liquid Pumps and UL 778 6th Ed. Motor Operated Water Pumps. CSA is the certifying body; UL 778 is the standard it certified against, so this is not a UL Listing\u003c\/li\u003e\n\u003cli\u003eDrinking Water: DAB designates the three standard base codes as its NSF versions, approved to NSF\/ANSI 61 and NSF\/ANSI 372; the three filter X codes carry no NSF designation in DAB's US item list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing to mount on the wall.\u003c\/strong\u003e Pressure switch, flow switch, board, check valve and expansion vessel are all sealed inside the pump, so the install is a cord, a discharge pipe and a rope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn demand starting and stopping.\u003c\/strong\u003e The board picks up the motor when pressure falls below 34.8 psi or flow appears, and lets it go about 10 seconds after the last tap closes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo pressure tank to buy or charge.\u003c\/strong\u003e The 0.04 liter spring and diaphragm vessel inside the pump absorbs small leaks and water hammer and never needs recharging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP 68 end to end.\u003c\/strong\u003e The rating covers the complete pump, so it can stay submerged permanently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti dry run.\u003c\/strong\u003e After 20 seconds with no flow and no pressure the pump alarms and stops, then retries every 30 minutes for 48 attempts and every 24 hours thereafter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-burping.\u003c\/strong\u003e Air pockets and gurgling water at the intake no longer trigger a false prime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANTIFLOOD.\u003c\/strong\u003e The board withholds the motor for 3 seconds at each start and drops it out hourly; if flow never reaches zero it raises an alarm rather than pumping against a jammed check valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo suction bases, one price.\u003c\/strong\u003e Standard open filter for a clean tank floor, filter X with a 1 in NPT port for Kit X floating suction where the bottom is silted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNFC Float pocket.\u003c\/strong\u003e DAB's NFC float (item 60184577) clips into a seat on the pump and reports level to the board without wiring and without breaking the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick coupling cord.\u003c\/strong\u003e The 49 ft cable unplugs at the pump for work inside a tank and resists tear-off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular for service.\u003c\/strong\u003e Hydraulic end, motor, electronics and filter separate independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBleed and overpressure valves.\u003c\/strong\u003e The bleed valve primes quickly on first fill or after a tank runs empty; the overpressure valve guards against water hammer and against ice forming in the discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDOC68 dry mounting.\u003c\/strong\u003e With DAB's DOC68 (item 60192276) the same pump sits outside the tank as an IP 68 flooded suction surface booster.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRainwater harvesting and cistern pressurization for a house or outbuilding\u003c\/li\u003e\n\u003cli\u003eDrawing and pressurizing from a drilled well, dug well or bore\u003c\/li\u003e\n\u003cli\u003eWhole house water supply for a single family dwelling\u003c\/li\u003e\n\u003cli\u003eGarden watering, drip irrigation and hose bib supply\u003c\/li\u003e\n\u003cli\u003eTank to tank transfer and top up in off grid or hauled water systems\u003c\/li\u003e\n\u003cli\u003ePressure boosting downstream of a storage tank where no pressure tank is wanted\u003c\/li\u003e\n\u003cli\u003eSeasonal cabin, farm and greenhouse water supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"35\/90 \/ Standard","offer_id":52945984389431,"sku":"60197689","price":1185.0,"currency_code":"USD","in_stock":true},{"title":"35\/90 \/ Filter X","offer_id":52945984422199,"sku":"60202762","price":1185.0,"currency_code":"USD","in_stock":true},{"title":"45\/90 \/ Standard","offer_id":52945984454967,"sku":"60195643","price":1252.0,"currency_code":"USD","in_stock":true},{"title":"45\/90 \/ Filter X","offer_id":52945984487735,"sku":"60202763","price":1252.0,"currency_code":"USD","in_stock":true},{"title":"35\/120 \/ Standard","offer_id":52945984520503,"sku":"60197690","price":1324.0,"currency_code":"USD","in_stock":true},{"title":"35\/120 \/ Filter X","offer_id":52945984553271,"sku":"60202764","price":1324.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-dtron2-submersible-on-demand-pressure-pump-1_1539a200-1fe3-4263-8e17-3e22fd84b6ab.jpg?v=1788491195"},{"product_id":"dab-pumps-dtron3-submersible-on-demand-pressure-pump","title":"Dab Pumps - DTron 3 Smart Submersible On-Demand Pressure Pump 115V - Midwest Warehouses","description":"\u003ch2\u003eDAB DTron 3 Submersible On-Demand Pressure Pump with Com Box\u003c\/h2\u003e\u003cp\u003eThe DAB DTron 3 is the measured and connected member of the 7 in DTron platform. Where the DTron 2 switches on a mechanical setpoint, the DTron 3 reads the system with a \u003cstrong\u003epressure sensor and a flow meter\u003c\/strong\u003e wired into its board, then reports what it sees over the power cable to a \u003cstrong\u003eCom Box\u003c\/strong\u003e controller that DAB packs with the pump and pairs at the factory. Starting and stopping remain straight \u003cstrong\u003eon\/off\u003c\/strong\u003e at line frequency, about 10 seconds of run-on after the last tap closes; CSA certificate 80018347 tabulates the DTron 3 control type as ON\/OFF at every duty point, and the inverter driven machine in DAB's submersible range is the EsyBox Diver. Nothing here is variable speed.\u003c\/p\u003e\u003ch3\u003eWhat the Com Box Adds\u003c\/h3\u003e\u003cp\u003eThe Com Box needs no signal wiring. It communicates with the pump by Power Line Communication down the supply cord, and from its face an installer can:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet cut-in pressure across the range DAB publishes for the DTron 3 electronics as 1.5 to 3.5 bar, about 21.8 to 50.8 psi, in place of the DTron 2's fixed 34.8 psi\u003c\/li\u003e\n\u003cli\u003eRead live status and alarms, dry run and anticycling among them\u003c\/li\u003e\n\u003cli\u003eForce a manual run for commissioning or a test\u003c\/li\u003e\n\u003cli\u003eSwitch on ANTICYCLING leak detection, which ships disabled and clears its own alarm after 12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTwo accessories extend it further. The \u003cstrong\u003eDConnect Box 2\u003c\/strong\u003e gateway (item 60198037) puts system pressure, alarms and remaining tank water on a phone or tablet through DAB's cloud service, and DAB's \u003cstrong\u003eNFC water level measurement\u003c\/strong\u003e sensor (item 60184570) works with the DTron 3 and that gateway only, never with the DTron 2. Both DTron models take the simpler NFC Float (item 60184577), which seats in a pocket on the pump and signals the board with no wiring and no opening of the housing. A DTron 3 can also be paired with a second identical DTron 3 in twin mode so the standby unit starts by itself if the duty pump fails.\u003c\/p\u003e\u003cp\u003eMechanically the DTron 3 is the same rugged build as the rest of the platform: technopolymer casing, diffusers, filter and three impellers, AISI 304 floating and stationary wear rings, an AISI 304 motor sleeve, an AISI 303 shaft on the hydraulic end and a double mechanical seal in an oil chamber. Check valve, overpressure valve, bleed valve and a 0.04 liter expansion vessel are integrated, so the system needs no external tank. IP 68 covers the entire pump and the 49 ft (15 m) supply cord parts at the pump on a quick coupling. Protection against dry running, against burping on aerated water and against a check valve jammed open by grit is all resident on the board.\u003c\/p\u003e\u003ch3\u003eChoosing the Suction Base\u003c\/h3\u003e\u003cp\u003eEach DTron 3 duty point comes in either of two suction bases. Hydraulics, motor, electronics, Com Box, cable length, certification and price do not change between them; the water intake does.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard suction base.\u003c\/strong\u003e Open filter base whose splitter holds the intake off the very bottom down to a 3.1 in level, trimmable or removable to draw down to 1.38 in remaining. The spacer in the box fixes intake height at 1.4 in, 1.6 in, 2.4 in or 3.1 in off the tank floor. Item codes 60197699 (35\/90), 60195642 (45\/90) and 60197703 (35\/120).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter X suction base.\u003c\/strong\u003e A closed base, not watertight, fitted with a \u003cstrong\u003e1 in NPT female connection\u003c\/strong\u003e instead of the open strainer. DAB's \u003cstrong\u003eKit X\u003c\/strong\u003e threads into that port: a 3.2 ft (1 m) hose on a float that lets the pump take water from a level you choose instead of from settled sand, silt and leaf litter. Pick it for a dug well, a bore with a sediment layer or a cistern nobody cleans. DAB lists Kit X as an option, so confirm what ships in the carton. Item codes 60202765 (35\/90), 60202766 (45\/90) and 60202767 (35\/120).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe two bases do not share a drinking water designation.\u003c\/strong\u003e DAB appends the suffix \u003cstrong\u003e- NSF\u003c\/strong\u003e to the item description of the three standard base codes and does not append it to the three filter X codes. Against those three standard codes DAB's May 2025 US catalog states approval to NSF 61, NSF 372, UL and CSA standards. The filter X codes carry no NSF designation in DAB's US item list and DAB supplies a drinking water version of the X on request. Specify the standard suction base for potable service.\u003c\/p\u003e\u003cp\u003eOnly the height changes with the base. Maximum pump diameter stays 7.28 in (185 mm), which DAB's May 2025 US catalog prints as 7.3 in, so either base passes through the same minimum 7.09 in by 7.28 in opening. A standard DTron 3 measures 25.63 in (651 mm) and weighs 25.6 lb; a filter X DTron 3 measures 26.61 in (676 mm) and weighs 25.8 lb.\u003c\/p\u003e\u003cp\u003eThe pump serves cisterns and rainwater tanks, drilled and dug wells and storage tanks feeding a house, sitting submerged, part submerged, upright or on its side. DAB's DOC68 accessory (item 60192276) takes it out of the water entirely and runs it as an IP 68 flooded suction surface booster. Leave at least 3.28 ft between the suction and the bottom of a well, and suspend the pump slightly clear of the floor so vibration does not carry into the structure.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cp\u003eThe model name is a nominal duty point: head in meters, then flow in liters per minute. DAB's measured curves land near but not on those names, and the naming rounds in both directions. \u003cstrong\u003eDAB's own documents disagree about maximum head, and both readings appear below.\u003c\/strong\u003e The primary figures come from DAB's 2020 US technical sheet curve tables and Table 1 of the DTron 3 instruction manual. The Max Head column in DAB's May 2025 US catalog reads 118 ft, 134 ft and 146 ft for these same three item codes, a set that contradicts DAB's curves and puts the 35\/120 above the 45\/90. Size to the curve figures, and confirm with DAB before committing to a lift near the limit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTron 3 35\/90\u003c\/strong\u003e: DAB's curve gives 121 ft (37 m) shutoff and 26.4 gpm (100 L\/min); the May 2025 catalog row gives 118 ft and 26 gpm. Rated 0.7 HP (0.52 kW) at 60 Hz, 750 W input, 7.4 A at 115V. Entry duty point and the lowest current draw, right for one bathroom or a shallow tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTron 3 45\/90\u003c\/strong\u003e: DAB's curve gives 147 ft (45 m) shutoff and 27.7 gpm (105 L\/min); the May 2025 catalog row gives 134 ft and 26 gpm. Rated 0.9 HP (0.67 kW) at 60 Hz, 1050 W input, 9.7 A at 115V. The head model, for deep tanks, long runs and upper floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTron 3 35\/120\u003c\/strong\u003e: DAB's curve gives 125 ft (38 m) shutoff and 33 gpm (125 L\/min); the May 2025 catalog row gives 146 ft and 34 gpm. Rated 0.9 HP (0.67 kW) at 60 Hz, 950 W input, 8.8 A at 115V. The flow model, for several fixtures or irrigation zones together.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: Electronic on\/off multistage submersible pump with Com Box; no inverter and no variable speed drive\u003c\/li\u003e\n\u003cli\u003eControl Devices: Pressure sensor and flow meter on the electronic board\u003c\/li\u003e\n\u003cli\u003eController: Com Box supplied with the pump, factory paired, Power Line Communication over the supply cord\u003c\/li\u003e\n\u003cli\u003eCut-In Pressure: Adjustable at the Com Box over DAB's published 1.5 to 3.5 bar, about 21.8 to 50.8 psi\u003c\/li\u003e\n\u003cli\u003eStop Delay: About 10 seconds after flow ceases\u003c\/li\u003e\n\u003cli\u003eSupply: 115V, 60 Hz, single phase, cord and plug connected\u003c\/li\u003e\n\u003cli\u003eRated Output P2 at 60 Hz: 0.7 HP (0.52 kW) on the 35\/90; 0.9 HP (0.67 kW) on the 45\/90 and 35\/120\u003c\/li\u003e\n\u003cli\u003eInput Power P1: 750 W, 1050 W or 950 W by model\u003c\/li\u003e\n\u003cli\u003eFull Load Current: 7.4 A, 9.7 A or 8.8 A at 115V by model\u003c\/li\u003e\n\u003cli\u003eShutoff Head on DAB's Curve: 121 ft, 147 ft or 125 ft by model; DAB's May 2025 catalog column reads 118 ft, 134 ft and 146 ft\u003c\/li\u003e\n\u003cli\u003eMaximum Flow: 26.4 gpm, 27.7 gpm or 33 gpm by model\u003c\/li\u003e\n\u003cli\u003eMotor Capacitor: 35 uF at 275 V, DAB spare part SP00006811\u003c\/li\u003e\n\u003cli\u003eDischarge: 1-1\/4 in NPT threaded outlet\u003c\/li\u003e\n\u003cli\u003eSuction, Standard Base: Open filter, intake height set to 1.4 in, 1.6 in, 2.4 in or 3.1 in with the included spacer\u003c\/li\u003e\n\u003cli\u003eSuction, Filter X Base: Closed filter X with 1 in NPT female connection for DAB's Kit X floating suction hose\u003c\/li\u003e\n\u003cli\u003eFree Passage: 0.08 in (2 mm) per DAB's technical sheet; the May 2025 catalog prints 0.1 in\u003c\/li\u003e\n\u003cli\u003eMinimum Suction Level: 4.33 in (110 mm)\u003c\/li\u003e\n\u003cli\u003eMinimum Remaining Water Level: 1.38 in (35 mm)\u003c\/li\u003e\n\u003cli\u003eMaximum Immersion Depth: 49 ft (15 m)\u003c\/li\u003e\n\u003cli\u003eLiquid and Ambient Temperature: 32 F to 122 F (0 C to 50 C)\u003c\/li\u003e\n\u003cli\u003eMaximum Starts Per Hour: 60\u003c\/li\u003e\n\u003cli\u003eDuty: Continuous service rated\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 68 over the complete pump\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F, with integrated capacitor and thermal overload protection\u003c\/li\u003e\n\u003cli\u003ePower Cable: 49 ft (15 m) with plug and quick coupling connector on both suction bases\u003c\/li\u003e\n\u003cli\u003eExpansion Vessel: 0.04 liter, integrated, maintenance free, never recharged\u003c\/li\u003e\n\u003cli\u003eWetted Construction: Technopolymer casing, diffusers, filter and impellers; AISI 304 wear rings and motor sleeve; AISI 303 shaft on the hydraulic end; double mechanical seal in an oil chamber\u003c\/li\u003e\n\u003cli\u003eMaximum Pump Diameter: 7.28 in (185 mm) on both suction bases, printed as 7.3 in by DAB's May 2025 US catalog\u003c\/li\u003e\n\u003cli\u003eOverall Height: 25.63 in (651 mm) standard base; 26.61 in (676 mm) filter X base\u003c\/li\u003e\n\u003cli\u003eWeight: 25.6 lb (11.6 kg) standard base; 25.8 lb (11.7 kg) filter X base\u003c\/li\u003e\n\u003cli\u003eCompatible Accessories: DConnect Box 2 gateway 60198037, NFC Level Sensor 60184570, NFC Float 60184577, DOC68 surface base 60192276, Kit X floating suction for the filter X base\u003c\/li\u003e\n\u003cli\u003eAgency Certification: CSA certificate 80018347, CSA mark with C and US indicators, certified to CSA C22.2 No. 108-14 Liquid Pumps and UL 778 6th Ed. Motor Operated Water Pumps. CSA is the certifying body; UL 778 is the standard it certified against, so this is not a UL Listing\u003c\/li\u003e\n\u003cli\u003eDrinking Water: DAB designates the three standard base codes as its NSF versions, approved to NSF\/ANSI 61 and NSF\/ANSI 372; the three filter X codes carry no NSF designation in DAB's US item list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure sensor plus flow meter.\u003c\/strong\u003e The board works from measured values rather than a mechanical trip, which is what makes an adjustable set point and real alarm reporting possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCom Box in the box.\u003c\/strong\u003e Factory paired, no signal wiring, communicating down the power line: set the cut-in, watch status, clear alarms, force manual running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable cut-in.\u003c\/strong\u003e DAB publishes 1.5 to 3.5 bar for the DTron 3 electronics, roughly 21.8 to 50.8 psi, so one pump covers a cottage tap and a three storey house.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANTICYCLING leak detection.\u003c\/strong\u003e Catches the slow leak that would otherwise start the pump all night. Disabled from the factory, enabled at the Com Box, self clearing after 12 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhone and tablet monitoring.\u003c\/strong\u003e Add DConnect Box 2 (item 60198037) for pressure, alarms and remaining tank water through DAB's cloud app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNFC level measurement, DTron 3 only.\u003c\/strong\u003e DAB's NFC level sensor (item 60184570) pairs with this pump and DConnect Box 2; it is not supported on the DTron 2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin mode.\u003c\/strong\u003e Pair two DTron 3 pumps and the standby takes over automatically when the duty pump faults.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNFC Float pocket.\u003c\/strong\u003e The NFC float (item 60184577) seats on the pump and reports to the board with no cable and no breach of the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry run, burping and jammed valve protection.\u003c\/strong\u003e Resident on the board: a 20 second dry run trip with timed retries, suppression of false primes on aerated water, and an alarm instead of continuous running when the check valve is held open.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo external pressure tank.\u003c\/strong\u003e A 0.04 liter integrated vessel takes up small leaks and water hammer and needs no charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP 68 across the whole pump.\u003c\/strong\u003e Not just the motor, so it can live underwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo suction bases at one price.\u003c\/strong\u003e Standard open filter, or filter X with a 1 in NPT port for Kit X floating suction above a silted bottom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick coupling cord and modular body.\u003c\/strong\u003e The 49 ft cable unplugs at the pump, and hydraulic end, motor, electronics and filter come apart separately for service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDOC68 dry mounting.\u003c\/strong\u003e Item 60192276 converts the install to an IP 68 flooded suction surface booster outside the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRainwater harvesting systems where the owner wants pressure and alarms on a phone\u003c\/li\u003e\n\u003cli\u003eCistern and storage tank pressurization with a set point tuned to the building\u003c\/li\u003e\n\u003cli\u003eDrilled wells, dug wells and bores feeding a single family home\u003c\/li\u003e\n\u003cli\u003eProperties with a leak history, where ANTICYCLING pays for itself\u003c\/li\u003e\n\u003cli\u003eDuty and standby pairs in twin mode for a house that cannot lose water\u003c\/li\u003e\n\u003cli\u003eRemote, rented or seasonal property monitored from somewhere else\u003c\/li\u003e\n\u003cli\u003eIrrigation and greenhouse supply drawn from a tank without a pressure vessel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"35\/90 \/ Standard","offer_id":52945984586039,"sku":"60197699","price":1665.0,"currency_code":"USD","in_stock":true},{"title":"35\/90 \/ Filter X","offer_id":52945984618807,"sku":"60202765","price":1665.0,"currency_code":"USD","in_stock":true},{"title":"45\/90 \/ Standard","offer_id":52945984651575,"sku":"60195642","price":1762.0,"currency_code":"USD","in_stock":true},{"title":"45\/90 \/ Filter X","offer_id":52945984684343,"sku":"60202766","price":1762.0,"currency_code":"USD","in_stock":true},{"title":"35\/120 \/ Standard","offer_id":52945984717111,"sku":"60197703","price":1834.0,"currency_code":"USD","in_stock":true},{"title":"35\/120 \/ Filter X","offer_id":52945984749879,"sku":"60202767","price":1834.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-dtron3-submersible-on-demand-pressure-pump-1_f8a4b5bb-f90d-4e97-bccc-ba76867f44be.jpg?v=1788491201"},{"product_id":"dab-pumps-esybox-mini-3","title":"Dab Pumps - EsyBox Mini 3 Constant Pressure Booster Pump System - Midwest Warehouses","description":"\u003ch2\u003eDAB EsyBox Mini 3 Compact Constant Pressure Booster System\u003c\/h2\u003e\u003cp\u003eThe DAB EsyBox Mini 3 is a fully integrated electronic pressurization system built for the water supply of a single dwelling. It packages a self-priming three-impeller pump, a variable frequency drive, pressure and flow sensors, a cartridge check valve and a 1\/4 gal expansion vessel into one enclosed unit, so a homeowner or installer gets a complete pressure system without assembling a pump, tank, switch and controller separately. Wetted parts include a stainless steel AISI 304 motor sleeve, brass 1 in inserts and NORYL impellers and diffusers.\u003c\/p\u003e\u003cp\u003eThe Mini 3 moves up to 21.1 GPM and produces up to 180 ft of head, holding 180 ft out to 5.3 GPM, 161 ft at 7.9 GPM and 128 ft at 10.6 GPM, with a maximum system pressure of 108 PSI and an adjustable set point anywhere from 15 to 79 PSI. It will self-prime from 26 ft in less than 5 minutes, which makes it practical on shallow wells, cisterns and rainwater tanks as well as on a municipal feed that needs boosting. The water-cooled motor and anti-vibration feet keep it quiet enough for a closet, basement or utility room with limited air exchange, and both horizontal and vertical mounting are supported.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eItem Code: 60212610\u003c\/li\u003e\n\u003cli\u003eMaximum Flow: 21.1 GPM\u003c\/li\u003e\n\u003cli\u003eMaximum Head: 180 ft\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: 108 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum Settable Pressure: 79 PSI\u003c\/li\u003e\n\u003cli\u003eAdjustable Pressure Set Point: 15 to 79 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum Suction Lift: 26 ft\u003c\/li\u003e\n\u003cli\u003eNumber of Impellers: 3\u003c\/li\u003e\n\u003cli\u003ePower Supply: 115 V \/ 230 V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eMaximum Power Input (P1): 0.85 kW (1.1 HP)\u003c\/li\u003e\n\u003cli\u003eRated Current: 9.6 A at 115 V, 4.8 A at 230 V\u003c\/li\u003e\n\u003cli\u003eSuction and Discharge Connections: 1 in NPT\u003c\/li\u003e\n\u003cli\u003eIntegrated Expansion Vessel: 1\/4 gal (1 L)\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature Range: 32 F to 95 F for domestic use, 32 F to 104 F for other uses\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 122 F\u003c\/li\u003e\n\u003cli\u003eMotor Protection Rating: IPX4\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eInstallation: Horizontal or vertical, fixed position\u003c\/li\u003e\n\u003cli\u003eCertifications: UL 778 5th Edition, CSA C22.2 No. 108-14, NSF\/ANSI 61, NSF\/ANSI 372\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 32.2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVariable speed inverter drive holds a constant set pressure from 15 to 79 PSI instead of cycling between cut-in and cut-out\u003c\/li\u003e\n\u003cli\u003eSelf-priming three-impeller pump lifts from 26 ft in under 5 minutes\u003c\/li\u003e\n\u003cli\u003eIntegrated 1\/4 gal expansion vessel, cartridge check valve, pressure sensor and flow sensor, so no external tank or pressure switch is required\u003c\/li\u003e\n\u003cli\u003eDual suction and discharge ports allow either horizontal or vertical installation\u003c\/li\u003e\n\u003cli\u003eWater-cooled motor, anti-vibration feet and enclosed hull for quiet operation in occupied spaces\u003c\/li\u003e\n\u003cli\u003eHigh resolution LCD display for setting and viewing every operating parameter\u003c\/li\u003e\n\u003cli\u003eBuilt-in dry run, antifreeze and anti-cycling protections\u003c\/li\u003e\n\u003cli\u003eDual voltage 115 V or 230 V operation with a USA NPT plug configuration\u003c\/li\u003e\n\u003cli\u003eOptional ESYWALL bracket for wall mounting in tight mechanical rooms\u003c\/li\u003e\n\u003cli\u003eCertified to UL 778 and CSA C22.2 No. 108-14, and listed to NSF\/ANSI 61 and NSF\/ANSI 372 for drinking water\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-family home water supply from a cistern, tank or municipal feed\u003c\/li\u003e\n\u003cli\u003eWell systems needing constant pressure without a large bladder tank\u003c\/li\u003e\n\u003cli\u003eRainwater harvesting and greywater reuse\u003c\/li\u003e\n\u003cli\u003eGarden and small irrigation zones\u003c\/li\u003e\n\u003cli\u003eBooster duty for homes on low-pressure city water\u003c\/li\u003e\n\u003cli\u003eApartments, cabins and tiny homes where mechanical space is limited\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"EsyBox Mini 3","offer_id":52945984782647,"sku":"60212610","price":2185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esybox-mini-3-1_60f58442-29fc-4909-a080-54e726cf478d.jpg?v=1788491237"},{"product_id":"dab-pumps-esybox","title":"Dab Pumps - EsyBox Constant Pressure Booster Pump System with VFD - Midwest Warehouses","description":"\u003ch2\u003eDAB EsyBox Constant Pressure Booster System\u003c\/h2\u003e\u003cp\u003eThe DAB EsyBox is an integrated electronic water pressurization system for domestic and residential service, built for the installer who wants one box instead of a pump, tank, switch and controller. Inside a sound-damping ABS hull it combines a self-priming five-stage pump, inverter electronics, pressure and flow sensors, a cartridge check valve and a 1\/2 gal (2 L) expansion vessel, with an AISI 304 stainless steel motor jacket and technopolymer hydraulics that resist corrosion.\u003c\/p\u003e\u003cp\u003eOutput reaches 32 GPM and 213 ft of head, holding about 187 ft at 10.6 GPM and 157 ft at 15.8 GPM, with a maximum system pressure of 115 PSI and a set point adjustable from 15 to 85 PSI. It self-primes from 26 ft, so it works equally well pulling from a cistern or shallow well and boosting a weak municipal feed. At 43 dB in normal operation it is quiet enough for occupied buildings, and up to 4 units can be linked wirelessly into a single pressure group for redundancy or higher combined flow.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eItem Code: 60212311\u003c\/li\u003e\n\u003cli\u003eMaximum Flow: 32 GPM\u003c\/li\u003e\n\u003cli\u003eMaximum Head: 213 ft (about 92 PSI)\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: 115 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum Settable Pressure: 85 PSI\u003c\/li\u003e\n\u003cli\u003eAdjustable Pressure Set Point: 15 to 85 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum Suction Lift: 26 ft\u003c\/li\u003e\n\u003cli\u003eNumber of Impellers: 5\u003c\/li\u003e\n\u003cli\u003ePower Supply: 230 V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eMaximum Power Input (P1): 1.55 kW (2.11 HP)\u003c\/li\u003e\n\u003cli\u003eRated Current: 10.0 A\u003c\/li\u003e\n\u003cli\u003eSuction and Discharge Connections: 1 in NPT\u003c\/li\u003e\n\u003cli\u003eIntegrated Expansion Vessel: 1\/2 gal (2 L)\u003c\/li\u003e\n\u003cli\u003eSound Level: 43 dB in normal use\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature Range: 32 F to 95 F for domestic use, 32 F to 104 F for other uses\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 122 F\u003c\/li\u003e\n\u003cli\u003eMotor Protection Rating: IPX4\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eInstallation: Horizontal or vertical, fixed position\u003c\/li\u003e\n\u003cli\u003eCertifications: UL 778 5th Edition, CSA C22.2 No. 108-14, NSF\/ANSI 61, NSF\/ANSI 372\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 59.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive-stage self-priming pump with inverter control that holds set pressure from 15 to 85 PSI as demand changes\u003c\/li\u003e\n\u003cli\u003eDelivers up to 32 GPM and 213 ft of head, enough for multi-bath homes and long irrigation runs\u003c\/li\u003e\n\u003cli\u003eIntegrated 1\/2 gal (2 L) expansion vessel, cartridge check valve, pressure sensor and flow sensor in a single enclosure\u003c\/li\u003e\n\u003cli\u003eRated at 43 dB in normal use thanks to a water-cooled motor, sound-damping ABS hull and anti-vibration feet\u003c\/li\u003e\n\u003cli\u003eWireless linking of up to 4 EsyBox units for a multi-pump pressure group\u003c\/li\u003e\n\u003cli\u003eCompatible with the ESYWALL, ESYDOCK, ESYTWIN and ESYTANK accessories for varied installation layouts\u003c\/li\u003e\n\u003cli\u003eHigh resolution LCD display for setting and monitoring every parameter\u003c\/li\u003e\n\u003cli\u003eDry run, antifreeze and anti-cycling protections built into the drive\u003c\/li\u003e\n\u003cli\u003eMounts horizontally or vertically, including in enclosed spaces with limited air exchange\u003c\/li\u003e\n\u003cli\u003eCertified to UL 778 and CSA C22.2 No. 108-14, and listed to NSF\/ANSI 61 and NSF\/ANSI 372 for drinking water\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWhole-house pressure boosting for larger residential systems\u003c\/li\u003e\n\u003cli\u003eWell, cistern and storage tank supply where a bladder tank is undesirable\u003c\/li\u003e\n\u003cli\u003eRainwater harvesting and reuse systems\u003c\/li\u003e\n\u003cli\u003eLandscape irrigation and gardening\u003c\/li\u003e\n\u003cli\u003eSmall commercial and light hospitality water supply\u003c\/li\u003e\n\u003cli\u003eMulti-pump groups of up to 4 units where redundancy or higher flow is needed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"EsyBox 230V NPT","offer_id":52945984848183,"sku":"60212311","price":4149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esybox-1_0e4823f5-8ba3-43cd-b851-0cad30040b64.jpg?v=1788491214"},{"product_id":"dab-pumps-esybox-diver","title":"Dab Pumps - EsyBox Diver Constant Pressure Submersible Pump System - Midwest Warehouses","description":"\u003ch2\u003eDAB EsyBox Diver Submersible Constant Pressure Pump System\u003c\/h2\u003e\u003cp\u003eThe DAB EsyBox Diver is a 7 in multistage submersible pump with the variable frequency drive built into the pump itself, aimed at installers pressurizing a home or property from a well, cistern or tank without a surface control panel or a pressure tank. The technopolymer pump body resists corrosion and oxidation, the whole unit is IP68 rated, and the integrated check valve, debris filter, air-vent valve and overpressure valve are all inside the same housing.\u003c\/p\u003e\u003cp\u003eIt delivers up to 31.7 GPM and 180 ft of head, holding a flat 180 ft out to about 13 GPM before tapering, and maintains a constant pressure set anywhere between 14 and 80 PSI with 35 PSI (plus or minus 3) preset from the factory. It will run on as little as 1.38 in of water and handles liquid from 32 F to 122 F, so it suits shallow tanks, rainwater cisterns and above-ground storage where the pump has to work at a low water level. PowerLine Communication and Wi-Fi are integrated, and the DConnect Box 2 supplied as standard lets you watch pressure, alarms and remaining tank water from a phone or tablet.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEsyBox Diver 55\/120 (60197922): standard 7 in submersible with 1-1\/4 in NPT discharge, 31.7 GPM and 180 ft of head, 220-240 V, 5.5 A, 49 ft cable\u003c\/li\u003e\n\u003cli\u003eEsyBox Diver X 55\/120 (60202768): same hydraulics and drive, plus a threaded 1 in inlet union and Kit X with a 3.3 ft floating suction hose and float to draw clean water above the tank floor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum Flow: 31.7 GPM\u003c\/li\u003e\n\u003cli\u003eMaximum Head: 180 ft\u003c\/li\u003e\n\u003cli\u003eConstant Pressure: 35 PSI (plus or minus 3) factory preset, adjustable from 14 to 80 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum Immersion Depth: 39 ft (standard version)\u003c\/li\u003e\n\u003cli\u003eMinimum Water Level: 1.38 in\u003c\/li\u003e\n\u003cli\u003eMinimum Suction Depth: 4.33 in\u003c\/li\u003e\n\u003cli\u003eFree Passage: 0.08 in\u003c\/li\u003e\n\u003cli\u003eNumber of Impellers: 3\u003c\/li\u003e\n\u003cli\u003eImpeller Material: Technopolymer with AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003ePower Supply: 220-240 V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003eMaximum Power Input (P1): 1.3 kW\u003c\/li\u003e\n\u003cli\u003eNominal Power Output (P2): 0.95 kW (1.3 HP)\u003c\/li\u003e\n\u003cli\u003eRated Current: 5.5 A\u003c\/li\u003e\n\u003cli\u003ePower Cable: 49 ft with NEMA 6-15P plug\u003c\/li\u003e\n\u003cli\u003eDischarge Connection: 1-1\/4 in NPT\u003c\/li\u003e\n\u003cli\u003ePump Outside Diameter: 7.28 in\u003c\/li\u003e\n\u003cli\u003ePump Height: 24.05 in\u003c\/li\u003e\n\u003cli\u003eIntegrated Expansion Vessel: 0.04 L\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature Range: 32 F to 122 F\u003c\/li\u003e\n\u003cli\u003eAmbient Temperature Range: Below 32 F to 122 F\u003c\/li\u003e\n\u003cli\u003eMaximum Starts per Hour: 60\u003c\/li\u003e\n\u003cli\u003eProtection Class: IP68\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eInstallation: Fixed, horizontal or vertical, submerged or semi-submerged\u003c\/li\u003e\n\u003cli\u003eCertifications: UL 778 6th Edition, CSA C22.2 No. 108-14 5th Edition; listed by DAB as NSF \/ CSA \/ UL\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 37.5 lb per unit\u003c\/li\u003e\n\u003cli\u003eEsyBox Diver 55\/120: standard suction inlet, item code 60197922\u003c\/li\u003e\n\u003cli\u003eEsyBox Diver X 55\/120: threaded 1 in inlet union with floating intake Kit X, item code 60202768\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSubmersible pump and variable frequency drive in one 7 in body, so no surface controller, pressure switch or bladder tank is needed\u003c\/li\u003e\n\u003cli\u003eHolds constant pressure anywhere from 14 to 80 PSI, preset at 35 PSI (plus or minus 3) from the factory\u003c\/li\u003e\n\u003cli\u003eIP68 rated end to end, usable fully submerged, partly submerged, or on the surface under flooded suction with the DOC68 accessory\u003c\/li\u003e\n\u003cli\u003eRuns down to a 1.38 in water level, with an adjustable suction foot at 1.4 in, 1.6 in, 2.4 in or 3.2 in to stay clear of sediment\u003c\/li\u003e\n\u003cli\u003eIntegrated non-return valve, debris filter, air-vent valve and overpressure valve for ice and water hammer protection\u003c\/li\u003e\n\u003cli\u003ePermanent magnet motor cooled by the pumped liquid, with double mechanical seal in an oil chamber and integrated thermal protection\u003c\/li\u003e\n\u003cli\u003ePowerLine Communication and Wi-Fi built in, with DConnect Box 2 supplied as standard for pressure, alarm and tank level monitoring\u003c\/li\u003e\n\u003cli\u003eNFC pocket accepts a float sensor without opening the pump or breaking the watertight seal\u003c\/li\u003e\n\u003cli\u003eTwo identical units can be paired to run in twin alternating mode or in support mode for higher demand\u003c\/li\u003e\n\u003cli\u003eCertified to UL 778 6th Edition and CSA C22.2 No. 108-14, and listed by DAB as NSF \/ CSA \/ UL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWells, cisterns and storage tanks needing constant pressure delivery\u003c\/li\u003e\n\u003cli\u003eRainwater harvesting systems, where the X version keeps the intake off the tank floor\u003c\/li\u003e\n\u003cli\u003eWhole-house supply from an underground or above-ground tank\u003c\/li\u003e\n\u003cli\u003eGarden and landscape irrigation in domestic and residential settings\u003c\/li\u003e\n\u003cli\u003eWater reuse and transfer between tanks\u003c\/li\u003e\n\u003cli\u003eRetrofits replacing a submersible pump plus surface tank and controller\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"EsyBox Diver 55\/120","offer_id":52945984946487,"sku":"60197922","price":3416.0,"currency_code":"USD","in_stock":true},{"title":"EsyBox Diver X 55\/120","offer_id":52945984979255,"sku":"60202768","price":3500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esybox-diver-1_393e9b20-8dfa-4780-a17f-63748eb28682.jpg?v=1788491221"},{"product_id":"dab-pumps-esybox-max","title":"Dab Pumps - EsyBox Max Commercial Constant Pressure Booster Pump - Midwest Warehouses","description":"\u003ch2\u003eDAB EsyBox Max Commercial Electronic Booster Set\u003c\/h2\u003e\u003cp\u003eThe DAB EsyBox Max is an integrated pumping system for pressurization in commercial building service, built for engineers and contractors who need a booster set that can be assembled on site. Each unit is an electronic vertical multi-impeller pump with a display, suction and discharge pressure sensors, a non-return valve and an integrated expansion tank; the modular Esydock base carries single, double or triple pump groups, and an additional kit joins two double bases into a four-pump system.\u003c\/p\u003e\u003cp\u003eA single unit moves up to 76.6 GPM, with DAB's May 2025 USA catalog rating the 45\/120 at 63 GPM and the 60\/120 and 85\/120 at 76 GPM, and produces up to 315 ft of head depending on model while holding a constant set pressure anywhere from 15 to 174 PSI. The water-cooled permanent magnet motor is more efficient and saves energy per DAB, and the compact, quiet package makes it suitable for mechanical rooms adjacent to occupied space. Three power sizes cover medium and large condominiums and high buildings, including those above 14 floors, and both single phase 208-240 V and three phase 380-480 V versions are offered.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEsyBox Max 45\/120 T 380-480 V: 3 impellers, three phase 380-480 V, 1.93 kW (2.59 HP), 3.4 A, 63 GPM maximum flow, 190 ft maximum head, 83 PSI maximum differential pressure. Electrical and hydraulic data as published in DAB's 2026 EsyBox Max technical leaflet; DAB has not published a USA item code, catalog row or shipping weight for this three phase 45\/120 version\u003c\/li\u003e\n\u003cli\u003eEsyBox Max 45\/120 M 208-240 V (60217370): 3 impellers, single phase 208-240 V, 1.97 kW (2.68 HP), 9.4 A, 63 GPM maximum flow, 190 ft maximum head, 83 PSI maximum differential pressure\u003c\/li\u003e\n\u003cli\u003eEsyBox Max 60\/120 M 220-240 V (60207561): 3 impellers, single phase 208-240 V, 2.68 kW (3.6 HP), 12.5 to 11.5 A, 76 GPM maximum flow, 226 ft maximum head, 97 PSI maximum differential pressure\u003c\/li\u003e\n\u003cli\u003eEsyBox Max 60\/120 T 380-480 V (60207560): 3 impellers, three phase 380-480 V, 2.65 kW (3.5 HP), 4.4 A, 76 GPM maximum flow, 226 ft maximum head, 97 PSI maximum differential pressure\u003c\/li\u003e\n\u003cli\u003eEsyBox Max 85\/120 T 380-480 V (60207559): 4 impellers, three phase 380-480 V, 3.50 kW (4.7 HP), 5.3 A, 76 GPM maximum flow, 315 ft maximum head, 136 PSI maximum differential pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum Flow: 63 to 76.6 GPM per unit depending on model\u003c\/li\u003e\n\u003cli\u003eConstant Pressure Set Point Range: 15 to 174 PSI\u003c\/li\u003e\n\u003cli\u003eOperating Pressure: 174 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum Inlet Pressure: 73 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum Suction Lift: 13 ft with a foot valve\u003c\/li\u003e\n\u003cli\u003eMaximum Liquid Temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 113 F\u003c\/li\u003e\n\u003cli\u003eMotor Protection Class: IPX5\u003c\/li\u003e\n\u003cli\u003eMotor Insulation Class: F\u003c\/li\u003e\n\u003cli\u003eImpeller Material: Technopolymer with steel wear rings\u003c\/li\u003e\n\u003cli\u003eMotor: Water-cooled permanent magnet, stainless steel jacket, AISI 303 stainless steel shaft\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet Connections: 1-1\/4 in and 2 in NPT on the pump unit per DAB's May 2025 USA catalog; the EsyDock Max base is threaded 2 in NPT\u003c\/li\u003e\n\u003cli\u003eInstallation: Fixed, vertical position\u003c\/li\u003e\n\u003cli\u003eCertifications: NSF\/ANSI 61, NSF\/ANSI 372, UL, CSA\u003c\/li\u003e\n\u003cli\u003eEsyBox Max 45\/120: 3 impellers, 63 GPM maximum flow, 190 ft maximum head, 83 PSI maximum differential pressure\u003c\/li\u003e\n\u003cli\u003eEsyBox Max 60\/120: 3 impellers, 76 GPM maximum flow, 226 ft maximum head, 97 PSI maximum differential pressure\u003c\/li\u003e\n\u003cli\u003eEsyBox Max 85\/120: 4 impellers, 76 GPM maximum flow, 315 ft maximum head, 136 PSI maximum differential pressure\u003c\/li\u003e\n\u003cli\u003eSingle Phase Power Input (M models): 208-240 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003eThree Phase Power Input (T models): 380-480 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003eShipping Weight: 63.9 lb per pump unit for 45\/120 M, 60\/120 M and 60\/120 T; 66.1 lb for 85\/120 T\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModular On Site Assembly design: single, double, triple or quadruple pump sets are built from the same pump unit and an Esydock base\u003c\/li\u003e\n\u003cli\u003eVariable frequency drive holds a constant discharge pressure from 15 to 174 PSI regardless of demand\u003c\/li\u003e\n\u003cli\u003eWater-cooled permanent magnet motor for higher efficiency and energy saving\u003c\/li\u003e\n\u003cli\u003ePressure sensors on both suction and discharge, plus an integrated non-return valve and expansion tank inside each pump\u003c\/li\u003e\n\u003cli\u003eLarge onboard display for configuration and monitoring, with the H2D app and integrated Wi-Fi module for remote control\u003c\/li\u003e\n\u003cli\u003eDSync technology auto-detects language, time and units, then synchronizes the remaining pumps in a booster set\u003c\/li\u003e\n\u003cli\u003eEsy I\/O expansion module available for building management system integration\u003c\/li\u003e\n\u003cli\u003eIntegrated protections for dry running, current and voltage faults, overheating, freezing, anti-blocking and anti-cycling\u003c\/li\u003e\n\u003cli\u003eCompact and quiet enough for installation in occupied areas of a building\u003c\/li\u003e\n\u003cli\u003eApproved to NSF 61, NSF 372, UL and CSA standards per DAB USA published documentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePressure boosting in commercial buildings and building service systems\u003c\/li\u003e\n\u003cli\u003eMedium and large condominiums and high-rise buildings, including above 14 floors\u003c\/li\u003e\n\u003cli\u003eMulti-pump booster sets of two, three or four units for staged demand and redundancy\u003c\/li\u003e\n\u003cli\u003eHotels, schools, healthcare and light industrial water supply\u003c\/li\u003e\n\u003cli\u003eMunicipal feed boosting where inlet pressure is inadequate at upper floors\u003c\/li\u003e\n\u003cli\u003eIrrigation and process water systems needing steady pressure over a wide flow range\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"45\/120 T 380-480V","offer_id":52945985044791,"sku":"60217369","price":6624.0,"currency_code":"USD","in_stock":true},{"title":"45\/120 M 208-240V","offer_id":52945985077559,"sku":"60217370","price":6624.0,"currency_code":"USD","in_stock":true},{"title":"60\/120 M 220-240V","offer_id":52945985110327,"sku":"60207561","price":7360.0,"currency_code":"USD","in_stock":true},{"title":"60\/120 T 380-480V","offer_id":52945985143095,"sku":"60207560","price":7360.0,"currency_code":"USD","in_stock":true},{"title":"85\/120 T 380-480V","offer_id":52945985175863,"sku":"60207559","price":8841.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pumps-esybox-max-1_c5e69e30-f4b6-49d8-9024-62203c5d3a7a.jpg?v=1788491230"},{"product_id":"dab-euroinox-multistage-stainless-steel-pump","title":"Dab Pumps - EUROINOX Multistage Stainless Steel Booster Pump - Midwest Warehouses","description":"\u003ch2\u003eDAB EUROINOX Multistage Stainless Steel Booster Pump\u003c\/h2\u003e\u003cp\u003eThe DAB EUROINOX is a horizontal multistage centrifugal pump built around a stainless steel pump body. DAB specifies a die-cast aluminium motor support, an AISI 304 stainless steel seal holder and rotor shaft, technopolymer impellers, diffuser bodies and diffusers, stainless steel adjustment rings and a carbon and ceramic mechanical seal. The single-phase motor is asynchronous and externally ventilated, with a built-in capacitor and thermal and current overload protection. Motor protection is IP 44, terminal board protection is IP 55 and the insulation is class F. Every model in this range runs on 115\/230 V dual voltage at 60 Hz and uses 1 in NPT suction and 1 in NPT discharge connections.\u003c\/p\u003e\u003cp\u003eDAB positions the EUROINOX for domestic water supply and pressurization, for irrigation of gardens and vegetable gardens, and for moving clean water in general. The multistage hydraulic end is what makes it useful where a single impeller pump runs out of pressure: with eight models the range covers 112 ft to 236 ft of shutoff head and flows to 31.7 GPM, so it can feed a whole-house pressure system, a sprinkler zone bank or a booster duty ahead of a filter or treatment train. DAB rates it for clean water that is free from solid or abrasive substances, non viscous, non aggressive, non crystallised and chemically neutral. It installs horizontally, fixed or portable.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEUROINOX 30\/306 M: 0.6 HP, max head 151 ft, max flow 13.2 GPM\u003c\/li\u003e\n\u003cli\u003eEUROINOX 40\/306 M: 0.75 HP, max head 187 ft, max flow 13.2 GPM\u003c\/li\u003e\n\u003cli\u003eEUROINOX 30\/506 M: 0.75 HP, max head 138 ft, max flow 21.1 GPM\u003c\/li\u003e\n\u003cli\u003eEUROINOX 40\/506 M: 1.1 HP, max head 190 ft, max flow 21.1 GPM\u003c\/li\u003e\n\u003cli\u003eEUROINOX 50\/506 M: 1.36 HP, max head 236 ft, max flow 21.1 GPM\u003c\/li\u003e\n\u003cli\u003eEUROINOX 25\/806 M: 0.75 HP, max head 112 ft, max flow 31.7 GPM\u003c\/li\u003e\n\u003cli\u003eEUROINOX 30\/806 M: 1.1 HP, max head 154 ft, max flow 31.7 GPM\u003c\/li\u003e\n\u003cli\u003eEUROINOX 40\/806 M: 1.36 HP, max head 194 ft, max flow 31.7 GPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePump Type: Horizontal multistage centrifugal, self-priming\u003c\/li\u003e\n\u003cli\u003ePower Supply: 1 x 115\/230 V, 60 Hz, dual voltage\u003c\/li\u003e\n\u003cli\u003eOperating Range: 2.6 to 31.7 GPM with head up to 236 ft\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Pressure: 116 psi\u003c\/li\u003e\n\u003cli\u003eMaximum Suction Depth: 26 ft\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature: 32 F to 95 F for domestic use, 32 F to 104 F for other uses\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eSuction and Discharge: 1 in NPT and 1 in NPT\u003c\/li\u003e\n\u003cli\u003ePump Body: Stainless steel\u003c\/li\u003e\n\u003cli\u003eMotor Support: Die-cast aluminium\u003c\/li\u003e\n\u003cli\u003eSeal Holder and Rotor Shaft: AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eImpellers, Diffuser Bodies and Diffusers: Technopolymer\u003c\/li\u003e\n\u003cli\u003eAdjustment Rings: Stainless steel\u003c\/li\u003e\n\u003cli\u003eMechanical Seal: Carbon and ceramic\u003c\/li\u003e\n\u003cli\u003eMotor Protection: IP 44\u003c\/li\u003e\n\u003cli\u003eTerminal Board Protection: IP 55\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eInstallation: Horizontal, fixed or portable\u003c\/li\u003e\n\u003cli\u003eCertification: CSA and UL, per DAB USA 60 Hz price list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel pump body\u003c\/strong\u003e across the whole range, not just on the top models\u003c\/li\u003e\n\u003cli\u003eMultistage hydraulics deliver high pressure from a compact horizontal package\u003c\/li\u003e\n\u003cli\u003eDAB describes the design as \u003cem\u003eexceptionally silent running\u003c\/em\u003e, which matters on pumps mounted near living space\u003c\/li\u003e\n\u003cli\u003eDual voltage 115\/230 V wiring lets one pump suit either service\u003c\/li\u003e\n\u003cli\u003eBuilt-in capacitor with thermal and current overload protection in the single-phase motor\u003c\/li\u003e\n\u003cli\u003eTechnopolymer stage components with stainless steel adjustment rings resist wear\u003c\/li\u003e\n\u003cli\u003eEight models spanning 0.6 HP to 1.36 HP so the duty point can be matched instead of oversized\u003c\/li\u003e\n\u003cli\u003e1 in NPT ports on every model simplifies piping and spares\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWhole-house domestic water supply and pressure boosting\u003c\/li\u003e\n\u003cli\u003eGarden, vegetable garden and landscape irrigation\u003c\/li\u003e\n\u003cli\u003eSprinkler zone supply where head is the limiting factor\u003c\/li\u003e\n\u003cli\u003eBoosting ahead of filtration, softeners or treatment equipment\u003c\/li\u003e\n\u003cli\u003eRainwater and storage tank transfer with clean water\u003c\/li\u003e\n\u003cli\u003eLight agricultural and small farm water supply\u003c\/li\u003e\n\u003cli\u003eHobby greenhouse and nursery watering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"30\/306 M","offer_id":52945985241399,"sku":"60119512","price":600.0,"currency_code":"USD","in_stock":true},{"title":"40\/306 M","offer_id":52945985274167,"sku":"60119513","price":635.0,"currency_code":"USD","in_stock":true},{"title":"30\/506 M","offer_id":52945985306935,"sku":"60119514","price":673.0,"currency_code":"USD","in_stock":true},{"title":"40\/506 M","offer_id":52945985339703,"sku":"60119515","price":763.0,"currency_code":"USD","in_stock":true},{"title":"50\/506 M","offer_id":52945985372471,"sku":"60119516","price":848.0,"currency_code":"USD","in_stock":true},{"title":"25\/806 M","offer_id":52945985405239,"sku":"60119517","price":728.0,"currency_code":"USD","in_stock":true},{"title":"30\/806 M","offer_id":52945985438007,"sku":"60119518","price":819.0,"currency_code":"USD","in_stock":true},{"title":"40\/806 M","offer_id":52945985470775,"sku":"60119519","price":904.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-euroinox-multistage-stainless-steel-pump-1_38165303-8b7b-4978-a1ae-dcdc4f06c0e7.jpg?v=1788491017"},{"product_id":"dab-jetcom-self-priming-jet-pump","title":"Dab Pumps - JETCOM Self-Priming Shallow Well Jet Pump - Midwest Warehouses","description":"\u003ch2\u003eDAB JETCOM Self-Priming Jet Pump\u003c\/h2\u003e\u003cp\u003eThe DAB JETCOM is a single-stage self-priming centrifugal pump with an internal ejector and a technopolymer pump body. DAB specifies a cast iron motor support, a technopolymer impeller, diffuser, Venturi tube and sand guard, stainless steel adjustment rings and a carbon and ceramic mechanical seal. The motor is asynchronous, closed and cooled by external ventilation, with built-in thermal and current overload protection and a permanently connected capacitor on the single-phase version. Motor protection is IP 44 with IP 55 terminal board protection and class F insulation. All four models run on 115-230 V dual voltage at 60 Hz with 1 in NPT suction and 1 in NPT discharge.\u003c\/p\u003e\u003cp\u003eThe internal ejector is the point of the pump: it lets the JETCOM pull a prime and keep pumping even when air bubbles are present in the suction line, down to a maximum suction depth of 26 ft. That makes it the standard choice for shallow wells, cisterns, ponds and above-ground tanks where the water level sits below the pump. DAB lists it for domestic water supply, small-scale agriculture and gardening. The technopolymer body keeps the pump light and corrosion-free and DAB notes it will tolerate water carrying small quantities of sand. Liquid must be clean, non-viscous, non-aggressive, non-crystallised and chemically neutral.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJETCOM 62 M: 0.6 HP, max head 138 ft, max flow 13.2 GPM\u003c\/li\u003e\n\u003cli\u003eJETCOM 82 M: 0.8 HP, max head 154 ft, max flow 15.8 GPM\u003c\/li\u003e\n\u003cli\u003eJETCOM 102 M: 1 HP, max head 177 ft, max flow 15.8 GPM\u003c\/li\u003e\n\u003cli\u003eJETCOM 132 M: 1.36 HP, max head 158 ft, max flow 21.1 GPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePump Type: Self-priming centrifugal with internal ejector\u003c\/li\u003e\n\u003cli\u003ePower Supply: 1 x 115-230 V, 60 Hz, dual voltage\u003c\/li\u003e\n\u003cli\u003eOperating Range: 1.8 to 23.3 GPM with head up to 173 ft, per DAB USA May 2025 catalog\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 87 psi\u003c\/li\u003e\n\u003cli\u003eMaximum Suction Depth: 26 ft\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature: 32 F to 95 F for domestic use, 32 F to 104 F for other uses\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eSuction and Discharge: 1 in NPT and 1 in NPT\u003c\/li\u003e\n\u003cli\u003ePump Body: Technopolymer\u003c\/li\u003e\n\u003cli\u003eMotor Support: Cast iron\u003c\/li\u003e\n\u003cli\u003eImpeller, Diffuser, Venturi Tube and Sand Guard: Technopolymer\u003c\/li\u003e\n\u003cli\u003eAdjustment Rings: Stainless steel\u003c\/li\u003e\n\u003cli\u003eMechanical Seal: Carbon and ceramic\u003c\/li\u003e\n\u003cli\u003eMotor Protection: IP 44\u003c\/li\u003e\n\u003cli\u003eTerminal Board Protection: IP 55\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eInstallation: Horizontal, fixed or portable\u003c\/li\u003e\n\u003cli\u003eCertification: CSA and UL, per DAB USA 60 Hz price list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal ejector\u003c\/strong\u003e gives strong suction and lets the pump run with air bubbles in the line\u003c\/li\u003e\n\u003cli\u003eSelf-primes from up to 26 ft below the pump\u003c\/li\u003e\n\u003cli\u003eTechnopolymer pump body will not rust and keeps shipping and mounting weight low\u003c\/li\u003e\n\u003cli\u003eCast iron motor support gives the pump a rigid mounting foot despite the plastic wet end\u003c\/li\u003e\n\u003cli\u003eDual voltage 115-230 V wiring on all four models\u003c\/li\u003e\n\u003cli\u003eBuilt-in thermal and current overload protection with permanently connected capacitor\u003c\/li\u003e\n\u003cli\u003eFan guard shaped to act as an air conveyor for motor cooling\u003c\/li\u003e\n\u003cli\u003eTolerates water carrying small quantities of sand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShallow well water supply where the water table is above 26 ft of lift\u003c\/li\u003e\n\u003cli\u003eCistern, storage tank and rain barrel pumping\u003c\/li\u003e\n\u003cli\u003eResidential pressure boosting\u003c\/li\u003e\n\u003cli\u003eSmall to medium irrigation and garden watering\u003c\/li\u003e\n\u003cli\u003ePond and surface water transfer\u003c\/li\u003e\n\u003cli\u003eSmall-scale agriculture and hobby farm water supply\u003c\/li\u003e\n\u003cli\u003ePortable or seasonal water supply duties\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"62 M","offer_id":52945985536311,"sku":"60119498","price":530.0,"currency_code":"USD","in_stock":true},{"title":"82 M","offer_id":52945985569079,"sku":"60119499","price":630.0,"currency_code":"USD","in_stock":true},{"title":"102 M","offer_id":52945985601847,"sku":"60119500","price":670.0,"currency_code":"USD","in_stock":true},{"title":"132 M","offer_id":52945985634615,"sku":"60119501","price":696.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-jetcom-self-priming-jet-pump-1_4f20f34a-d3ee-4934-9c0a-ffe8b56e1599.jpg?v=1788491058"},{"product_id":"dab-jet-ps-cast-iron-jet-pump-pressure-switch","title":"Dab Pumps - JET Cast Iron Jet Pump with Pressure Switch - Midwest Warehouses","description":"\u003ch2\u003eDAB JET -PS Cast Iron Jet Pump with Pressure Switch\u003c\/h2\u003e\u003cp\u003eThe DAB JET -PS is a self-priming centrifugal jet pump with a cast iron pump body and a factory-fitted pressure switch. The -PS suffix is how DAB splits this range in its USA price list: the -PS codes ship with the pressure switch installed, the plain codes ship without it. DAB specifies technopolymer for the impeller, diffuser, Venturi tube and sand filter, stainless steel shim washers and a carbon and ceramic mechanical seal. On the 50, 75-1 and 100-1 the motor frame is die-cast aluminium and the shaft is AISI 416 stainless steel; on the 150, 200 and 300 the motor frame is GJL 200 cast iron and the shaft is AISI 303 stainless steel. The 150 and 200 use a twin impeller. Motors are asynchronous and externally cooled, on greased-for-life ball bearings, with built-in thermo-amperometric protection and a permanently connected capacitor, IP 44 motor protection, IP 55 terminal block protection and class F insulation. All models run at 3400 RPM.\u003c\/p\u003e\u003cp\u003eWith the pressure switch fitted, the JET -PS starts and stops on demand, which is what turns it from a bare pump into a working domestic water system when paired with a pressure tank. DAB rates a maximum suction depth of 29 ft, so it suits shallow wells, cisterns, ponds and tanks. The six models here span 0.5 HP to 3 HP and cover 119 ft to 203 ft of head and flows to 46.2 GPM, which lets the range serve everything from a single-family pressure system to a small farm or a demanding irrigation main. The 0.5, 0.75 and 1 HP models are 115\/230 V dual voltage; the 1.5, 2 and 3 HP models are 230 V only. Note the -1 models: the 75-1 and 100-1 use a different hydraulic end than the plain 75 and 100 at the same rated HP, and DAB's published curves show the -1 versions trading head for flow. DAB's tables give the JET 75 at 177 ft and 15.8 GPM against the JET 75-1 at 119 ft and 21.1 GPM, and the JET 100 at 200 ft and 15.8 GPM against the JET 100-1 at 158 ft and 21.1 GPM. DAB does not define the suffix in words anywhere; that is what its curves show.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJet 50-PS: 0.5 HP, max head 154 ft, max flow 15.8 GPM\u003c\/li\u003e\n\u003cli\u003eJet 75-1-PS: 0.75 HP, max head 119 ft, max flow 21.1 GPM\u003c\/li\u003e\n\u003cli\u003eJet 100-1-PS: 1 HP, max head 158 ft, max flow 21.1 GPM\u003c\/li\u003e\n\u003cli\u003eJet 150-PS: 1.5 HP, max head 200 ft, max flow 18.5 GPM\u003c\/li\u003e\n\u003cli\u003eJet 200-PS: 2 HP, max head 203 ft, max flow 31.7 GPM\u003c\/li\u003e\n\u003cli\u003eJet 300-PS: 3 HP. DAB publishes no 60 Hz head or flow numbers for this model, only a curve; it sits inside the family operating range of 1.8 to 46.2 GPM with head up to 203 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePump Type: Self-priming centrifugal jet pump with internal ejector, pressure switch fitted\u003c\/li\u003e\n\u003cli\u003ePower Supply: 1 x 115\/230 V 60 Hz dual voltage on Jet 50-PS, 75-1-PS and 100-1-PS; 1 x 230 V 60 Hz on Jet 150-PS, 200-PS and 300-PS\u003c\/li\u003e\n\u003cli\u003eOperating Range: 1.8 to 46.2 GPM with head up to 203 ft, per DAB USA May 2025 catalog\u003c\/li\u003e\n\u003cli\u003eMotor Speed: 3400 RPM\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Pressure: 116 psi\u003c\/li\u003e\n\u003cli\u003eMaximum Suction Depth: 29 ft\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature: 32 F to 95 F for domestic use, 32 F to 104 F for other uses\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eService Factor: 1.6 on 50-PS, 1.4 on 75-1-PS, 1.35 on 100-1-PS, 1.3 on 150-PS, 1.2 on 200-PS, 1.15 on 300-PS\u003c\/li\u003e\n\u003cli\u003eSuction and Discharge: 1 in NPT and 1 in NPT on 50-PS, 75-1-PS and 100-1-PS; 1-1\/4 in NPT and 1 in NPT on 150-PS and 200-PS; 1-1\/2 in NPT and 1-1\/4 in NPT on 300-PS\u003c\/li\u003e\n\u003cli\u003ePump Body: GJL 200 cast iron\u003c\/li\u003e\n\u003cli\u003eMotor Frame: Die-cast aluminium on 50-PS, 75-1-PS and 100-1-PS; GJL 200 cast iron on 150-PS, 200-PS and 300-PS\u003c\/li\u003e\n\u003cli\u003eImpeller, Diffuser, Venturi Tube and Sand Filter: Technopolymer, PPO-GF 20 on 150-PS, 200-PS and 300-PS\u003c\/li\u003e\n\u003cli\u003eShaft with Rotor: AISI 416 stainless steel on 50-PS, 75-1-PS and 100-1-PS; AISI 303 stainless steel on 150-PS, 200-PS and 300-PS\u003c\/li\u003e\n\u003cli\u003eMechanical Seal: Carbon and ceramic\u003c\/li\u003e\n\u003cli\u003eO-Ring Gasket: NBR rubber\u003c\/li\u003e\n\u003cli\u003eMotor Protection: IP 44\u003c\/li\u003e\n\u003cli\u003eTerminal Block Protection: IP 55\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eInstallation: Fixed, horizontal position\u003c\/li\u003e\n\u003cli\u003eCertification: CSA C22.2 No. 108-14 Liquid Pumps and UL 778 5th Edition Motor Operated Water Pumps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure switch fitted from the factory\u003c\/strong\u003e, which is exactly what the -PS suffix means in DAB's USA price list\u003c\/li\u003e\n\u003cli\u003eCast iron pump body for pressure capability and long service life\u003c\/li\u003e\n\u003cli\u003eInternal ejector self-primes from up to 29 ft and keeps pumping through air bubbles\u003c\/li\u003e\n\u003cli\u003eTwin impeller on the Jet 150-PS and Jet 200-PS\u003c\/li\u003e\n\u003cli\u003eTechnopolymer sand filter helps the pump live with water carrying low levels of sandy impurities\u003c\/li\u003e\n\u003cli\u003eGreased-for-life oversized ball bearings with built-in thermo-amperometric motor protection\u003c\/li\u003e\n\u003cli\u003e115\/230 V dual voltage on the 0.5, 0.75 and 1 HP models\u003c\/li\u003e\n\u003cli\u003eCSA certified to CSA C22.2 No. 108-14 and UL 778 5th Edition\u003c\/li\u003e\n\u003cli\u003eSix models from 0.5 HP to 3 HP covering head-biased and flow-biased duties\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShallow well domestic water systems with a pressure tank\u003c\/li\u003e\n\u003cli\u003eCistern and storage tank pressure supply\u003c\/li\u003e\n\u003cli\u003eFarm and homestead water supply\u003c\/li\u003e\n\u003cli\u003eIrrigation mains and sprinkler supply, especially the higher flow Jet 200-PS and Jet 300-PS\u003c\/li\u003e\n\u003cli\u003ePond, creek and surface water transfer\u003c\/li\u003e\n\u003cli\u003eLight industrial service water\u003c\/li\u003e\n\u003cli\u003eBooster duty where a cast iron wet end is preferred over technopolymer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"JET 50 PS","offer_id":52945985700151,"sku":"102668110","price":719.0,"currency_code":"USD","in_stock":true},{"title":"JET 75-1 PS","offer_id":52945985732919,"sku":"102668140","price":788.0,"currency_code":"USD","in_stock":true},{"title":"JET 100-1 PS","offer_id":52945985765687,"sku":"102668150","price":864.0,"currency_code":"USD","in_stock":true},{"title":"JET 150 PS","offer_id":52945985798455,"sku":"102166230","price":1169.0,"currency_code":"USD","in_stock":true},{"title":"JET 200 PS","offer_id":52945985831223,"sku":"102166240","price":1329.0,"currency_code":"USD","in_stock":true},{"title":"JET 300 PS","offer_id":52945985863991,"sku":"102166250","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-jet-ps-cast-iron-jet-pump-pressure-switch-1_78f47101-1890-4e87-b4a7-b63dcea7ceac.jpg?v=1788491051"},{"product_id":"dab-jetss-ps-stainless-steel-jet-pump","title":"Dab Pumps - JET SS Stainless Steel Jet Pump with Pressure Switch - Midwest Warehouses","description":"\u003ch2\u003eDAB JET SS -PS Stainless Steel Jet Pump with Pressure Switch\u003c\/h2\u003e\u003cp\u003eThe DAB JET SS -PS is the stainless steel version of DAB's self-priming jet pump, supplied with the pressure switch fitted. DAB specifies an AISI 304 stainless steel pump body, seal holder cover and shim washers, a die-cast aluminium motor frame, a technopolymer impeller, diffuser and Venturi tube, an AISI 416 stainless steel shaft with rotor, NBR O-ring gaskets and a carbon and ceramic mechanical seal. The motor is asynchronous, closed and externally air cooled, on oversized greased-for-life ball bearings, with built-in thermo-amperometric protection and a permanently connected capacitor on the single-phase version. Class F insulation, 3400 RPM, 115\/230 V dual voltage at 60 Hz, 1 in NPT suction and 1 in NPT discharge. DAB's technical sheet lists CSA C22.2 No. 108-14 and UL 778 5th Edition approvals.\u003c\/p\u003e\u003cp\u003eThe reason to choose JET SS over the cast iron JET is the wetted stainless steel: it is the right call for slightly aggressive water, for coastal and humid installations, and anywhere a rusting cast iron volute would be a nuisance. Hydraulically it is the same idea as the cast iron pump. The internal ejector self-primes from up to 29 ft below the pump and keeps working with air bubbles in the suction line, so it suits shallow wells, cisterns, ponds and tanks. DAB rates the JET SS 50-75-100 family for capacity up to 23 gpm and head up to 213 ft. With the pressure switch fitted and a pressure tank added, it becomes a complete domestic water system. Liquid must be clean, free of solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJET SS 50-PS: 0.5 HP, 0.6 kW, service factor 1.6, 8.21 \/ 4.22 A. DAB publishes this model's head and flow only as a curve, inside the family range of 213 ft head and 23 GPM\u003c\/li\u003e\n\u003cli\u003eJET SS 75-1-PS: 0.75 HP, 0.75 kW, service factor 1.4, 10.3 \/ 5.25 A. DAB publishes this model's head and flow only as a curve, inside the family range of 213 ft head and 23 GPM\u003c\/li\u003e\n\u003cli\u003eJET SS 100-1-PS: 1 HP, 1 kW, service factor 1.35, 13.9 \/ 7.2 A. DAB publishes this model's head and flow only as a curve, inside the family range of 213 ft head and 23 GPM\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePump Type: Self-priming centrifugal jet pump with internal ejector, pressure switch fitted\u003c\/li\u003e\n\u003cli\u003ePower Supply: 1 x 115\/230 V, 60 Hz, dual voltage\u003c\/li\u003e\n\u003cli\u003eOperating Range: capacity up to 23 gpm, head up to 213 ft, 92 psi\u003c\/li\u003e\n\u003cli\u003eMotor Speed: 3400 RPM\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Pressure: 116 psi\u003c\/li\u003e\n\u003cli\u003eMaximum Suction Depth: 29 ft\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature: 32 F to 95 F for domestic use, 32 F to 104 F for other uses\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eSuction and Discharge: 1 in NPT and 1 in NPT\u003c\/li\u003e\n\u003cli\u003ePump Body, Seal Holder Cover and Shim Washers: AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMotor Frame: Die-cast aluminium\u003c\/li\u003e\n\u003cli\u003eImpeller, Diffuser and Venturi Tube: Technopolymer\u003c\/li\u003e\n\u003cli\u003eShaft with Rotor: AISI 416 stainless steel\u003c\/li\u003e\n\u003cli\u003eO-Ring Gasket: NBR rubber\u003c\/li\u003e\n\u003cli\u003eMechanical Seal: Carbon and ceramic\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eInstallation: Fixed, horizontal position\u003c\/li\u003e\n\u003cli\u003eCertification: CSA C22.2 No. 108-14 Liquid Pumps and UL 778 5th Edition Motor Operated Water Pumps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAISI 304 stainless steel pump body\u003c\/strong\u003e, seal holder cover and shim washers\u003c\/li\u003e\n\u003cli\u003ePressure switch fitted from the factory, which is what the -PS suffix means in DAB's USA price list\u003c\/li\u003e\n\u003cli\u003eInternal ejector self-primes from up to 29 ft and keeps pumping through air bubbles\u003c\/li\u003e\n\u003cli\u003eNoticeably lighter than the cast iron JET: 17.6 lb on the 0.5 HP against 26.2 lb for the equivalent JET\u003c\/li\u003e\n\u003cli\u003eOversized greased-for-life ball bearings with built-in thermo-amperometric protection\u003c\/li\u003e\n\u003cli\u003e115\/230 V dual voltage on all three models\u003c\/li\u003e\n\u003cli\u003eCSA certified to CSA C22.2 No. 108-14 and UL 778 5th Edition\u003c\/li\u003e\n\u003cli\u003e1 in NPT ports across the range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShallow well domestic water systems where water chemistry is unkind to cast iron\u003c\/li\u003e\n\u003cli\u003eCoastal, humid and corrosive-atmosphere installations\u003c\/li\u003e\n\u003cli\u003eCistern and rainwater storage tank pressure supply\u003c\/li\u003e\n\u003cli\u003eSmall to medium irrigation and garden watering\u003c\/li\u003e\n\u003cli\u003ePond and surface water transfer\u003c\/li\u003e\n\u003cli\u003eLight industrial service water and washdown supply\u003c\/li\u003e\n\u003cli\u003eReplacement for a corroded cast iron jet pump on an existing 1 in NPT system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"JET SS 50 PS","offer_id":52945985962295,"sku":"102648110","price":1028.0,"currency_code":"USD","in_stock":true},{"title":"JET SS 75-1 PS","offer_id":52945985995063,"sku":"102648140","price":1082.0,"currency_code":"USD","in_stock":true},{"title":"JET SS 100-1 PS","offer_id":52945986027831,"sku":"102648150","price":1181.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-jetss-ps-stainless-steel-jet-pump-1_89d64302-fad4-41ea-a1e1-313fac04e2dc.jpg?v=1788491064"},{"product_id":"dab-evosta-2-ecm-circulator","title":"Dab Pumps - EVOSTA2 ECM Wet Rotor Circulator - Midwest Warehouses","description":"\u003ch2\u003eDAB EVOSTA2 ECM Wet Rotor Circulator\u003c\/h2\u003e\u003cp\u003eThe DAB EVOSTA2 is a wet rotor electronic circulator built on a permanent magnet synchronous motor with an electronic driver, which DAB describes as an ECM or Electronic Commutation Motor, also called a brushless DC motor. The pump body is cast iron with cataphoresis treatment, the motor casing is AISI 304 stainless steel, the rotor can flange is AISI 316 stainless steel, the impeller is Ultrason, the motor shaft is ceramic alumina with alumina bearings and a graphite axial bearing, the outer shell and cover are polycarbonate and the seals are EPDM. It is rated IP X5, described by DAB as NEMA 4X, with class F insulation and TF 110. Power input is single-phase 110-127 V at 60 Hz, drawing 4 W to 41 W and 0.064 A to 0.61 A, with an energy efficiency index of EEI 0.23 or better. The flange is an oval 2-bolt pattern on a 6-3\/8 in centre distance and DAB rates sound at 43 dB(A) or less.\u003c\/p\u003e\u003cp\u003eAn EVOSTA2 is a direct modern replacement for an old three-speed circulator: DAB built it to the same dimensions as the VA series and it covers heads up to 18 ft with a single model instead of a shelf of them. Its built-in electronics sense what the system is asking for and adapt the circulator's output to match, which is where the energy saving and the quieter operation come from. Setup is one sequential button giving three regulating modes with three curves each: proportional differential pressure, constant differential pressure and constant curve. A breather plug vents the system and manually releases the motor shaft. The pump is self-protected against overload, lack of phase, excess temperature and over- and under-voltage. DAB rates it for water in heating and air conditioning systems and for industrial water circuits, with up to 30 percent glycol.\u003c\/p\u003e\u003ch3\u003eAvailable Models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEVOSTA2 55: 41 W maximum input, max head 18 ft, max flow 15.1 GPM, without display\u003c\/li\u003e\n\u003cli\u003eEVOSTA2D 55: 41 W maximum input, max head 18 ft, max flow 15.1 GPM, with display showing the real working point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePump Type: Wet rotor electronic circulator, ECM permanent magnet synchronous motor\u003c\/li\u003e\n\u003cli\u003ePower Supply: 1 x 110-127 V, 60 Hz\u003c\/li\u003e\n\u003cli\u003ePower Input P1: 4 W to 41 W\u003c\/li\u003e\n\u003cli\u003eCurrent In: 0.064 A to 0.61 A\u003c\/li\u003e\n\u003cli\u003eEnergy Efficiency Index: EEI 0.23 or better\u003c\/li\u003e\n\u003cli\u003eOperating Range: 0.8 to 15.1 GPM with head up to 18 ft\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 145 psi\u003c\/li\u003e\n\u003cli\u003eMinimum Working Pressure: 14.5 psi (1 bar)\u003c\/li\u003e\n\u003cli\u003eLiquid Temperature: 14 F to 230 F\u003c\/li\u003e\n\u003cli\u003eMaximum Ambient Temperature: 104 F\u003c\/li\u003e\n\u003cli\u003eMinimum Suction Pressure at 194 F: 32.8 ft.c.w.\u003c\/li\u003e\n\u003cli\u003eSound Pressure: 43 dB(A) or less\u003c\/li\u003e\n\u003cli\u003eFlange: Oval 2-bolt, 6-3\/8 in centre distance\u003c\/li\u003e\n\u003cli\u003ePump Body: Cast iron with cataphoresis treatment\u003c\/li\u003e\n\u003cli\u003eMotor Casing: AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eRotor Can Flange: AISI 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eImpeller: Ultrason\u003c\/li\u003e\n\u003cli\u003eMotor Shaft: Ceramic, alumina\u003c\/li\u003e\n\u003cli\u003eProtection Class: IP X5, NEMA 4X\u003c\/li\u003e\n\u003cli\u003eInsulation Class: F\u003c\/li\u003e\n\u003cli\u003eTF Class: TF 110\u003c\/li\u003e\n\u003cli\u003eInstallation: Horizontal motor axis\u003c\/li\u003e\n\u003cli\u003ePumped Liquid: Clean, free of solids and mineral oils, non-viscous, chemically neutral, glycol max 30 percent\u003c\/li\u003e\n\u003cli\u003eCertification: CSA and UL, per DAB USA 60 Hz price list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECM permanent magnet motor\u003c\/strong\u003e that draws as little as 4 W and tops out at 41 W\u003c\/li\u003e\n\u003cli\u003eNine settings from one sequential button: proportional differential pressure, constant differential pressure and constant curve, three curves each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEVOSTA2D adds a display\u003c\/strong\u003e that shows the real working point; in DAB's own designation index 2 means without display and 2d means with display, so the D version is not a twin or double-head pump\u003c\/li\u003e\n\u003cli\u003eDrop-in replacement for old three-speed circulators, dimensionally matched to the VA series\u003c\/li\u003e\n\u003cli\u003eCovers heads up to 18 ft with a single model\u003c\/li\u003e\n\u003cli\u003eEEI 0.23 or better\u003c\/li\u003e\n\u003cli\u003eSelf-protected against overload, lack of phase, excess temperature and over- and under-voltage\u003c\/li\u003e\n\u003cli\u003eBreather plug for venting and manual release of the motor shaft\u003c\/li\u003e\n\u003cli\u003eIP X5 water-resistant electronics, rated by DAB as NEMA 4X\u003c\/li\u003e\n\u003cli\u003eRotates 360 degrees around a vertical axis, with a check valve and 2-bolt flange available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResidential hydronic heating loops and zone circulation\u003c\/li\u003e\n\u003cli\u003eAir conditioning and chilled water circulation\u003c\/li\u003e\n\u003cli\u003eRadiant floor heating systems\u003c\/li\u003e\n\u003cli\u003eBoiler primary and secondary loops\u003c\/li\u003e\n\u003cli\u003eDirect replacement for an aging three-speed circulator\u003c\/li\u003e\n\u003cli\u003eIndustrial water circuits\u003c\/li\u003e\n\u003cli\u003eGlycol systems up to 30 percent glycol\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"EVOSTA2 55","offer_id":52945986060599,"sku":"60192406","price":371.0,"currency_code":"USD","in_stock":true},{"title":"EVOSTA2D 55","offer_id":52945986093367,"sku":"60192407","price":407.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-evosta-2-ecm-circulator-1_9d763f23-f714-4c27-bc4e-3551fba39e22.jpg?v=1788491022"},{"product_id":"dab-non-return-valve-gulf-type-esybox-sp00000148","title":"Dab Pumps - Non Return Valve Gulf Type for EsyBox - SP00000148 - Midwest Warehouses","description":"\u003ch2\u003eNon Return Valve Gulf Type - EsyBox - SP00000148\u003c\/h2\u003e\u003cp\u003eDAB part SP00000148, listed by DAB as \"(SP) NON RETURN VALVE GULF TYPE E.SYBOX\". The E.sybox has an integrated non-return valve which the DAB instruction manual calls \"necessary for correct operation\". DAB also names the failure mode plainly: \"The presence of solid bodies or sand in the water could cause malfunctioning of the valve and therefore of the system.\" DAB section 10.3 has you extract the valve, clean it under running water, make sure it is not damaged, and replace it if necessary.\u003c\/p\u003e\u003cp\u003ePosition 49A on the DAB E.sybox spare parts list. The valve lives in the 1-1\/4 in mouth of the system, which DAB warns must never have a pipe connected to it. Access is through a removable screw cap on Face B, which DAB says should be removed \"only in the case of maintenance by skilled personnel\". The valve comes out inside a cartridge: DAB has you hook the perforated tab with end \"F\" of the accessory cross key and extract it without rotating, and warns that refitting \"requires the force necessary to compress the 2 O-rings\".\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 49A on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eListed at position 49A under the same part number on both the revision N.1 list (product code 60161183) and the revision N.3 list (product code 60212671).\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-stable part.\u003c\/strong\u003e We compared the E.SYBOX revision N.1 spare parts list (product code 60161183) line by line against the revision N.3 list (product code 60212671). Position 49A carries the same part number, SP00000148, on both lists, so this part is not revision-gated between N.1 and N.3. Only four positions change part number between those two revisions, and this is not one of them.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\" To read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eDAB is explicit about the seals: \"Should one or more O-rings be lost or damaged during maintenance operations on the non-return valve, they must be replaced. Otherwise the system might not work correctly.\"\u003c\/li\u003e\n\u003cli\u003eDAB does not publish material, dimensions or a service interval for this part, so neither do we. What DAB does publish is the symptom to act on: abnormal operation of the non-return valve, which DAB links to solid bodies or sand in the water.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOften Replaced With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit O-ring SPS, SP00002081\u003c\/strong\u003e (position 28) - DAB requires any O-ring lost or damaged during non-return valve service to be replaced.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap 1-1\/4 in with O-ring, SP00000140\u003c\/strong\u003e (position 311) - the access cap over the mouth that houses the valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit maintenance tools, SP00000144\u003c\/strong\u003e (position 524) - DAB says end \"F\" of the accessory cross key \"is dedicated to maintenance of the non-return valve\".\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659475767,"sku":"SP00000148","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-non-return-valve-gulf-type-esybox-sp00000148-1.jpg?v=1788499501"},{"product_id":"dab-complete-hydraulic-kit-esybox-sp00000158","title":"Dab Pumps - Complete Hydraulic Kit for EsyBox - SP00000158 - Midwest Warehouses","description":"\u003ch2\u003eComplete Hydraulic Kit - EsyBox - SP00000158\u003c\/h2\u003e\u003cp\u003eDAB part SP00000158, the complete hydraulic kit for the E.sybox. Worth knowing before you search for it: DAB's own spare parts list prints the description as \"C0MPLETE HYDRAULIC KIT FOR E.SYBOX\", with a zero in place of the letter O. That is DAB's typo, carried through to distributor price files, and it is why this part can be hard to find by description. Order by part number. DAB describes the E.sybox itself as \"an integrated system composed mainly of a self-priming multi-stage centrifugal electropump, an electronic circuit that controls it and an expansion vessel\"; this kit is the hydraulic side of that system.\u003c\/p\u003e\u003cp\u003ePosition 251 on the DAB E.sybox spare parts list. DAB publishes no contents list for this kit at part level, so we are not going to tell you what is in the box. If you need to know exactly which components the kit covers before you commit, ask DAB or your service agent to confirm against position 251 for your revision.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 251 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eRevision N.1 only. The source list is E.SYBOX revision N.1, product code 60161183.\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-specific part. Check your revision before you order.\u003c\/strong\u003e DAB lists SP00000158 at position 251 on the E.SYBOX revision N.1 spare parts list, product code 60161183. On the revision N.3 list, product code 60212671, that same position 251 carries a different part number: SP00008451, described by DAB as \"(SP) C0MPLETE HYDRAULIC\". This listing is the revision N.1 part. If your pump is a revision N.3 build, this is not your part number.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\"\u003c\/li\u003e\n\u003cli\u003eTo read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eThis is one of only four positions that change part number between revision N.1 and revision N.3, which makes getting the revision right the single most important thing on this order.\u003c\/li\u003e\n\u003cli\u003eDAB publishes no kit contents, materials or dimensions for this part, so we make no claim about them.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659574071,"sku":"SP00000158","price":116.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-complete-hydraulic-kit-esybox-sp00000158-1.jpg?v=1788499504"},{"product_id":"dab-pressure-sensor-assembly-esybox-sp00000150","title":"Dab Pumps - Pressure Sensor Assembly for EsyBox - SP00000150 - Midwest Warehouses","description":"\u003ch2\u003ePressure Sensor Assembly - EsyBox - SP00000150\u003c\/h2\u003e\u003cp\u003eDAB part SP00000150, listed by DAB as \"(SP) PRESSURE SENSOR ASS. E.SYBOX\". The E.sybox runs on an integrated inverter which, in DAB's words, \"makes use of flow, pressure and temperature sensors, also integrated in the system. By means of these sensors the system switches on and off automatically according to the utility's needs and it is able to detect conditions of malfunction, to prevent and indicate them.\" The internal pressure sensor is what lets the inverter hold a constant delivery pressure.\u003c\/p\u003e\u003cp\u003ePosition 464 on the DAB E.sybox spare parts list, on the hydraulic and electronics side of the system.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 464 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eListed at position 464 under the same part number on both the revision N.1 list (product code 60161183) and the revision N.3 list (product code 60212671).\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-stable part.\u003c\/strong\u003e We compared the E.SYBOX revision N.1 spare parts list (product code 60161183) line by line against the revision N.3 list (product code 60212671). Position 464 carries the same part number, SP00000150, on both lists, so this part is not revision-gated between N.1 and N.3. Only four positions change part number between those two revisions, and this is not one of them.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\" To read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eThe documented failure symptom is a specific alarm code. DAB section 4.1.4 covers \"BP1\" blockage due to fault of the internal pressure sensor: \"If the device detects a fault in the pressure sensor the pump remains blocked and the error signal BP1 is given. This status begins as soon as the problem is detected and ends automatically when correct conditions have been restored.\" DAB's error table also lists \"BP\" for blockage due to fault of the pressure sensor.\u003c\/li\u003e\n\u003cli\u003eRead the fault history before you buy. DAB section 7.1.12 \"FF: Fault log display\" gives a chronological display of the faults that have occurred during system operation, so you can confirm BP1 or BP actually happened rather than guessing.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659639607,"sku":"SP00000150","price":134.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-pressure-sensor-assembly-esybox-sp00000150-1.jpg?v=1788499507"},{"product_id":"dab-water-tank-gws-2l-esybox-sp00000146","title":"Dab Pumps - Water Tank GWS 2 L for EsyBox - SP00000146 - Midwest Warehouses","description":"\u003ch2\u003eWater Tank GWS 2 L - EsyBox - SP00000146\u003c\/h2\u003e\u003cp\u003eDAB part SP00000146. Two names, one part: distributor files carry it as \"WATER TANK GWS 2-LITERS E.SYBOX\" while DAB's own spare parts list prints position 331 as \"PRESSURE CULINDER FOR E.SYBOX\", DAB's spelling of cylinder. This is the E.sybox integrated expansion vessel. DAB gives it a total capacity of 2 litres and three jobs: \"to make the system elastic so as to protect it against water hammer\", \"to ensure a water reserve which, in the case of small leaks, maintains the pressure in the system for a longer time and spreads out needless restarts\", and \"when the utility is turned on, ensure the water pressure for the seconds that the system takes to switch on and reach the correct rotation speed.\"\u003c\/p\u003e\u003cp\u003ePosition 331 on the DAB E.sybox spare parts list, inside the system. Its air preload is set through the valve reached from the technical compartment (DAB Fig. 3, item 1). DAB is direct about when the whole vessel has to go: the diaphragm \"is typically the component subject to wear for items of this type. However, in the case of breakage, the entire expansion vessel must be replaced and exclusively by authorised personnel.\"\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 331 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eListed at position 331 under the same part number on both the revision N.1 list (product code 60161183) and the revision N.3 list (product code 60212671).\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-stable part.\u003c\/strong\u003e We compared the E.SYBOX revision N.1 spare parts list (product code 60161183) line by line against the revision N.3 list (product code 60212671). Position 331 carries the same part number, SP00000146, on both lists, so this part is not revision-gated between N.1 and N.3. Only four positions change part number between those two revisions, and this is not one of them.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\" To read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eDAB gives you a test before you spend the money. Its troubleshooting table lists \"Expansion vessel empty (insufficient air pressure) or has broken diaphragm\" against the symptom that water pressure is not immediate when a tap is opened, and the remedy reads: \"Check the air pressure through the valve in the technical compartment. If water comes out when checking, the vessel is broken: assistance service. Otherwise restore the air pressure.\" Water at the valve means you need this part. No water at the valve means you may only need to reset the preload.\u003c\/li\u003e\n\u003cli\u003eDAB warns the preload check itself must be done carefully: \"on small volumes the loss of even a limited quantity of air can cause an appreciable drop in pressure\", and any check or reset \"must be performed with the delivery system not under pressure\".\u003c\/li\u003e\n\u003cli\u003eDAB states this replacement is to be done \"exclusively by authorised personnel\".\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659672375,"sku":"SP00000146","price":182.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-water-tank-gws-2l-esybox-sp00000146-1.jpg?v=1788499509"},{"product_id":"dab-filling-port-cap-3-4-gas-esybox-sp00000151","title":"Dab Pumps - Filling Port Cap 3\/4 Gas for EsyBox - SP00000151 - Midwest Warehouses","description":"\u003ch2\u003eFilling Port Cap 3\/4 Gas - EsyBox - SP00000151\u003c\/h2\u003e\u003cp\u003eDAB part SP00000151, listed by DAB as \"(SP) FILLING PORT CAP 3\/4 GAS E.SYBOX\". This is the cap over the E.sybox filling port. DAB's priming instructions run through it: for vertical installation you \"remove the filling cap (Fig.3 point 6). Fill the system with clean water through the loading door, taking care to let the air out.\" On a below head installation DAB has you slacken the same cap \"enough to vent the trapped air\", which lets the system load completely on its own. The thread callout 3\/4 Gas is DAB's, from their part description.\u003c\/p\u003e\u003cp\u003ePosition 531 on the DAB E.sybox spare parts list. In the vertical configuration the filling cap is item 6 inside the technical compartment (DAB Fig. 3). DAB's accessory cross key has an end sized for it: end \"D\" is a \"hexagonal socket head suitable for removing the cap to perform filling in the case of vertical installation\", and DAB notes that if the key is lost or damaged the same operation can be done another way.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 531 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eListed at position 531 under the same part number on both the revision N.1 list (product code 60161183) and the revision N.3 list (product code 60212671).\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-stable part.\u003c\/strong\u003e We compared the E.SYBOX revision N.1 spare parts list (product code 60161183) line by line against the revision N.3 list (product code 60212671). Position 531 carries the same part number, SP00000151, on both lists, so this part is not revision-gated between N.1 and N.3. Only four positions change part number between those two revisions, and this is not one of them.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\" To read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eA cap that will not seal is a cap you will chase for months, because the E.sybox loads and vents through this port. If yours is cross-threaded, cracked or missing, this is the part.\u003c\/li\u003e\n\u003cli\u003eDAB publishes no material, dimension or torque figure for this cap at part level, so we state none. The only specification DAB gives is the 3\/4 Gas thread callout in the part name itself.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOften Replaced With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit maintenance tools, SP00000144\u003c\/strong\u003e (position 524) - DAB assigns end \"D\" of the accessory cross key to removing this cap for filling in the vertical configuration.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659705143,"sku":"SP00000151","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-filling-port-cap-3-4-gas-esybox-sp00000151-1.jpg?v=1788499512"},{"product_id":"dab-self-priming-shutter-esybox-sp00000159","title":"Dab Pumps - Self-Priming Shutter for EsyBox - SP00000159 - Midwest Warehouses","description":"\u003ch2\u003eSelf-Priming Shutter - EsyBox - SP00000159\u003c\/h2\u003e\u003cp\u003eDAB part SP00000159, listed by DAB as \"(SP) SELF-PRIMING SHUTTER E.SYBOX\". The E.sybox is \"made and supplied with the capacity of being self-priming\", and this shutter is the moving part in that circuit. DAB describes the sequence: \"During priming the pump obliges part of the water already under pressure to return to the suction part until a pressure value is reached at delivery whereby the system can be considered primed. At this point the recirculating channel closes automatically. This phase is repeated each time the pump is switched on, even already primed, until the same pressure value that closes the recirculating channel is reached (about 1 bar).\"\u003c\/p\u003e\u003cp\u003ePosition 382 on the DAB E.sybox spare parts list, in the recirculating circuit behind the drainage cap. DAB section 9.1 reaches it by removing the drainage cap \"taking care not to drop the O-ring\", then taking the shutter out of its seat with pliers: \"The shutter will be extracted together with the O-Ring and the metal spring with which it is assembled.\" On refitting, DAB specifies the orientation: gasket side towards the inside of the pump, stem with cross-shaped fins towards the outside.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 382 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eListed at position 382 under the same part number on both the revision N.1 list (product code 60161183) and the revision N.3 list (product code 60212671).\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-stable part.\u003c\/strong\u003e We compared the E.SYBOX revision N.1 spare parts list (product code 60161183) line by line against the revision N.3 list (product code 60212671). Position 382 carries the same part number, SP00000159, on both lists, so this part is not revision-gated between N.1 and N.3. Only four positions change part number between those two revisions, and this is not one of them.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\" To read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eThe noise you may be chasing is documented. DAB describes \"the clicking noise of the pipe shutter each time the system is switched on\" as normal behaviour of the self-priming circuit, and gives inhibiting self-priming as the way to eliminate it where the supply is always below head. That is a procedure, not a fault, so do not buy this part just because you hear the click.\u003c\/li\u003e\n\u003cli\u003eDAB notes that inhibiting self-priming is mandatory where local regulations forbid self-priming pumps, and that the shutter is reused in that procedure with its spring removed. Check whether your shutter is actually damaged before ordering.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOften Replaced With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit O-ring SPS, SP00002081\u003c\/strong\u003e (position 28) - DAB's procedure has the shutter come out together with its O-ring, and warns against dropping the drainage cap O-ring on the way in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCap 1 in with O-ring, SP00000139\u003c\/strong\u003e (position 64) - DAB reaches the shutter through the drainage cap on Face E, which DAB describes as the 1 in cap whose main function is emptying the system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659737911,"sku":"SP00000159","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-self-priming-shutter-esybox-sp00000159-1.jpg?v=1788499515"},{"product_id":"dab-flowmeter-cover-with-sensor-esybox-sp00000147","title":"Dab Pumps - Flowmeter Cover With Sensor for EsyBox - SP00000147 - Midwest Warehouses","description":"\u003ch2\u003eFlowmeter Cover With Sensor - EsyBox - SP00000147\u003c\/h2\u003e\u003cp\u003eDAB part SP00000147, listed by DAB as \"(SP) FLOWMETER COVER WITH SENSOR E.SYBOX\". The flow sensor is one of the three sensors the E.sybox inverter runs on: DAB says the integrated electronic control \"makes use of flow, pressure and temperature sensors, also integrated in the system. By means of these sensors the system switches on and off automatically according to the utility's needs.\" Flow is what tells the pump a tap has closed and it is time to stop.\u003c\/p\u003e\u003cp\u003ePosition 169 on the DAB E.sybox spare parts list, on the delivery side hydraulics. Its reading is what you see on the FL page of the pump menu, which DAB says \"displays the instantaneous flow in litres\/min or gal\/min\", and on the output flow meter page (DAB section 7.1.10), which shows a total count and a resettable partial count.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 169 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eListed at position 169 under the same part number on both the revision N.1 list (product code 60161183) and the revision N.3 list (product code 60212671).\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-stable part.\u003c\/strong\u003e We compared the E.SYBOX revision N.1 spare parts list (product code 60161183) line by line against the revision N.3 list (product code 60212671). Position 169 carries the same part number, SP00000147, on both lists, so this part is not revision-gated between N.1 and N.3. Only four positions change part number between those two revisions, and this is not one of them.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\" To read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eThe documented symptom is a pump that will not shut off. DAB's troubleshooting table lists four causes for \"The pump does not stop\": a leak in the system, a clogged impeller or hydraulic part, air getting into the suction pipe, and \"Faulty flow sensor\". DAB's remedy for the first three is to fix the leak, clear the obstruction or cure the air ingress; only for the faulty flow sensor does DAB say \"Contact the assistance centre\". Rule out the first three before you buy this part.\u003c\/li\u003e\n\u003cli\u003eDAB publishes no material, dimension or service interval for this part, so we state none.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659770679,"sku":"SP00000147","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-flowmeter-cover-with-sensor-esybox-sp00000147-1.jpg?v=1788499517"},{"product_id":"dab-panel-board-esybox-sp00000135","title":"Dab Pumps - Panel Board for EsyBox - SP00000135 - Midwest Warehouses","description":"\u003ch2\u003ePanel Board - EsyBox - SP00000135\u003c\/h2\u003e\u003cp\u003eDAB part SP00000135, listed by DAB as \"(SP) PANEL BOARD E.SYBOX\". This is the E.sybox user interface board. DAB describes the panel as \"composed of a display and a keyboard and its function is to set the system, query its status and communicate any alarms\", and elsewhere as \"a keypad with LCD display and with POWER, COMM, ALARM warning leds\". Everything an owner does on the pump, from setting the pressure setpoint to reading the fault log, happens here.\u003c\/p\u003e\u003cp\u003ePosition 361 on the DAB E.sybox spare parts list, on the front of the system. DAB's panel rotation procedure shows how it is held: four screws at the corners of the panel, disengaged with the hex wrench in the accessory tool, with the panel then moved away \"taking care not to pull on the signal transmission cable\" that connects it to the body. DAB warns not to remove those screws fully and not to drop them into the system.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 361 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eRevision N.1 only. The source list is E.SYBOX revision N.1, product code 60161183.\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-specific part. Check your revision before you order.\u003c\/strong\u003e DAB lists SP00000135 at position 361 on the E.SYBOX revision N.1 spare parts list, product code 60161183. On the revision N.3 list, product code 60212671, that same position 361 carries a different part number: SP00008378, described by DAB as \"(SP) DISPLAY V2 E.SYBOX\". This listing is the revision N.1 part. If your pump is a revision N.3 build, this is not your part number.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\"\u003c\/li\u003e\n\u003cli\u003eTo read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eDAB renamed this position between revisions, which tells you something. On revision N.1 position 361 is \"PANEL BOARD E.SYBOX\"; on revision N.3 the same position is \"DISPLAY V2 E.SYBOX\" under part number SP00008378. A V2 designation on the revision N.3 part is DAB signalling a changed interface generation, so do not assume the two are interchangeable.\u003c\/li\u003e\n\u003cli\u003eDAB publishes no electrical rating, display specification or dimensions for this board at part level, so we state none.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOften Replaced With\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKit maintenance tools, SP00000144\u003c\/strong\u003e (position 524) - DAB's panel work uses the hex wrench supplied in the accessory tool to disengage the four corner screws.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659868983,"sku":"SP00000135","price":174.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-panel-board-esybox-sp00000135-1.jpg?v=1788499520"},{"product_id":"dab-main-board-esybox-sp00000136","title":"Dab Pumps - Main Board for EsyBox - SP00000136 - Midwest Warehouses","description":"\u003ch2\u003eMain Board - EsyBox - SP00000136\u003c\/h2\u003e\u003cp\u003eDAB part SP00000136, listed by DAB as \"(SP) MAIN BOARD E.SYBOX\". This is the board behind the E.sybox integrated inverter. DAB describes that control as \"of the type with inverter\", using the integrated flow, pressure and temperature sensors so that \"the system switches on and off automatically according to the utility's needs and it is able to detect conditions of malfunction, to prevent and indicate them.\" DAB names the two most important functions for pumping systems as \"the maintaining of a constant pressure value in delivery and energy saving\": the inverter holds pressure \"by varying the rotation speed of the electropump\", and limits power \"to the minimum necessary\" rather than running flat out.\u003c\/p\u003e\u003cp\u003ePosition 458 on the DAB E.sybox spare parts list, inside the system. DAB lists it separately from the heat sink assembly at position 496 and from the panel board at position 361, so those are three distinct part numbers, not one module.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 458 on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eRevision N.1 only. The source list is E.SYBOX revision N.1, product code 60161183.\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-specific part. Check your revision before you order.\u003c\/strong\u003e DAB lists SP00000136 at position 458 on the E.SYBOX revision N.1 spare parts list, product code 60161183. On the revision N.3 list, product code 60212671, that same position 458 carries a different part number: SP00008380, described by DAB as \"(SP) MAIN BOARD V2 E.SYBOX\". This listing is the revision N.1 part. If your pump is a revision N.3 build, this is not your part number.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\"\u003c\/li\u003e\n\u003cli\u003eTo read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eThis is the most expensive single part on the E.sybox list, and it is revision-gated. Confirm the revision before you order, not after.\u003c\/li\u003e\n\u003cli\u003eDAB renamed this position between revisions: on revision N.3 position 458 reads \"MAIN BOARD V2 E.SYBOX\" under part number SP00008380. The V2 designation is DAB signalling a changed board generation.\u003c\/li\u003e\n\u003cli\u003eDAB publishes no electrical rating, firmware level or dimensions for this board at part level, so we state none. If you need to match firmware, the VE page in the pump menu is where DAB puts the hardware and software version.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946659901751,"sku":"SP00000136","price":717.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-main-board-esybox-sp00000136-1.jpg?v=1788499523"},{"product_id":"dab-support-bumpers-esybox-sp00000145","title":"Dab Pumps - Support Bumpers for EsyBox - SP00000145 - Midwest Warehouses","description":"\u003ch2\u003eSupport Bumpers - EsyBox - SP00000145\u003c\/h2\u003e\u003cp\u003eDAB part SP00000145, listed by DAB as \"(SP) SUPPORT BUMPERS E.SYBOX\". The E.sybox stands on four support feet that screw into brass threaded seats in the casing. DAB's installation instructions read: \"Remove the 4 support feet from the bottom tray of the packaging and screw them fully into their brass seats\", and DAB makes the feet responsible for the pump sitting square: \"If the surface is not flat, unscrew the foot that is not touching and adjust its height until it contacts the surface so as to ensure the stability of the system.\"\u003c\/p\u003e\u003cp\u003ePosition 127A on the DAB E.sybox spare parts list. Which face the feet go into depends on how the pump is installed: DAB puts four brass threads on Face C forming \"the seat for the 4 support feet in the case of vertical installation\", and four more on Face E for the horizontal configuration. The same feet serve both orientations.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB E.sybox. DAB numbers this part position 127A on the E.sybox exploded view and spare parts list.\u003c\/li\u003e\n\u003cli\u003eListed at position 127A under the same part number on both the revision N.1 list (product code 60161183) and the revision N.3 list (product code 60212671).\u003c\/li\u003e\n\u003cli\u003eSource list is drawn for the AU market build, \"E.SYBOX V220-240 50\/60Hz AUS PLUG\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevision-stable part.\u003c\/strong\u003e We compared the E.SYBOX revision N.1 spare parts list (product code 60161183) line by line against the revision N.3 list (product code 60212671). Position 127A carries the same part number, SP00000145, on both lists, so this part is not revision-gated between N.1 and N.3. Only four positions change part number between those two revisions, and this is not one of them.\u003c\/li\u003e\n\u003cli\u003eDAB prints this caution at the head of both spare parts lists: \"Attention: check the correspondence with the revision of your product.\" To read your own pump: the technical data plate sits inside the technical compartment (DAB instruction manual 60168399, Fig. 3, item 2, reached by removing the inspection door on Face A), or power the pump up and open the VE page in the menu, which DAB section 7.1.11 \"VE: Version display\" describes as the \"Hardware and software version with which the appliance is equipped.\"\u003c\/li\u003e\n\u003cli\u003eDAB ties these to safe installation, not cosmetics: \"The system must in fact be placed in a safe and stable position, ensuring that its axis is vertical: it must not be in an inclined position.\" A missing or collapsed foot is a stability problem, and a pump running on an uneven stance transmits more noise into whatever it is standing on.\u003c\/li\u003e\n\u003cli\u003eDAB publishes no material, hardness, dimensions or pack quantity for this item at part level, so we state none. If you need to know how many pieces are supplied under this part number, confirm with DAB or your service agent before ordering.\u003c\/li\u003e\n\u003cli\u003eFitment note for North American buyers: every DAB E.sybox spare parts list we can source is drawn against the AU market build, printed on the list as \"E.SYBOX V220-240 50\/60Hz AUS PLUG\". We have no DAB spare parts list for a North American NPT build, so confirm this part number against your own technical data plate, or with DAB, before you order. We are not going to pretend an AU list is a US list.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946660000055,"sku":"SP00000145","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-support-bumpers-esybox-sp00000145-1.jpg?v=1788499525"},{"product_id":"dab-o-ring-kit-esybox-max-sp00006718","title":"Dab Pumps - O-Ring Kit for EsyBox Max - SP00006718 - Midwest Warehouses","description":"\u003ch2\u003eO-Ring Kit - EsyBox Max - SP00006718\u003c\/h2\u003e\u003cp\u003eThe O-ring kit is the set of elastomer seals DAB calls out for the EsyBox Max hydraulic assembly. DAB's spare parts sheet lists it as \u003cstrong\u003e(SP) ESYBOXMAX - O-RING KIT\u003c\/strong\u003e at position 135, and the exploded drawing references position 135 at several separate points across the assembly rather than at a single location.\u003c\/p\u003e\u003cp\u003eDAB's maintenance instructions treat these seals as consumables of the service job rather than as scheduled-replacement items. Manual section 13.3 states that should one or more O-rings be lost or damaged during maintenance on the non-return valve, they must be replaced, otherwise the system might not work correctly. Section 13.4 tells you to screw the eyebolt back into place making sure that the O-ring has not been removed or damaged during the operation. Section 13.5, step 9, tells you to check the O-ring on the expansion tank and replace it if damaged, unless it is already supplied mounted on the DAB spare part, in which case it can be scrapped together with the vessel being replaced. On the spare parts drawing, position 135 items also appear at the pressure sensor and the self-priming shutter.\u003c\/p\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDAB EsyBox Max. DAB's spare parts sheet \u003cstrong\u003eESYBOX MAX 45\/120 M208-240 PUMP\/AUS2, revision N.1, document code 60217359\u003c\/strong\u003e lists this item at \u003cstrong\u003eposition 135\u003c\/strong\u003e as \u003cstrong\u003e(SP) ESYBOXMAX - O-RING KIT\u003c\/strong\u003e, item no. SP00006718.\u003c\/li\u003e\n\u003cli\u003eThe DAB EsyBox Max instruction manual for North America covers the \u003cstrong\u003eEsyBox Max 60\/120 M, 60\/120 T and 85\/120 T\u003c\/strong\u003e (manual section 1.5). That manual does not list the 45\/120 M208-240 at all, and the spare parts sheet cited here is for the 45\/120 M208-240. The two documents cover different model sets.\u003c\/li\u003e\n\u003cli\u003eThe manual sections that call for O-ring replacement (13.3 non-return valve, 13.4 motor shaft, 13.5 expansion vessel) are written for the EsyBox Max product without distinguishing between the models the manual covers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eAttention: check the correspondence with the revision of your product.\u003c\/em\u003e That caution is printed across the header of DAB's spare parts sheet. Check the position number and item number against the sheet issued for your own unit and its revision before you order.\u003c\/li\u003e\n\u003cli\u003eThe only EsyBox Max spare parts list available for this listing is the AU build sheet, \u003cstrong\u003eESYBOX MAX 45\/120 M208-240 PUMP\/AUS2, revision N.1, document code 60217359\u003c\/strong\u003e. DAB has not published a parts sheet in the documents used here for the 60\/120 T or 85\/120 T, so the item number for three-phase machines is not confirmed by these sources.\u003c\/li\u003e\n\u003cli\u003eDAB does not publish a contents list, sizes or materials for this kit at part level, and none are stated here. If you need to match one specific seal, work from the spare parts sheet issued for your unit.\u003c\/li\u003e\n\u003cli\u003eDAB's manual states the system requires no routine maintenance operations (section 13), so there is no published service interval that calls for this kit. It is ordered against a specific job or a damaged seal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOften Replaced With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNRV Group\u003c\/strong\u003e, SP00006704, position 121. Manual section 13.3 requires damaged or lost O-rings to be replaced whenever the non-return valve is serviced.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Tank 2 L\u003c\/strong\u003e, SP00006706, position 123. Manual section 13.5, step 9, covers the O-ring check during expansion vessel replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEyebolt 3\/4 in\u003c\/strong\u003e, SP00006698, position 115. Manual section 13.4 warns about the eyebolt O-ring when the motor shaft is freed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valley Milan","offers":[{"title":"Default Title","offer_id":52946661245239,"sku":"SP00006718","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/0341\/5863\/files\/dab-o-ring-kit-esybox-max-sp00006718-1.jpg?v=1788499528"}],"url":"https:\/\/www.blacklabelsupply.io\/collections\/dab-pumps.oembed?page=2","provider":"BLACK LABEL","version":"1.0","type":"link"}